Question about Sharp Plasmacluster FP-N60CX Air Purifier

2 Answers

Air conditioner. Sharp ay-xpo8cr. this unit was installed in feb 2004 costing 952euros it went wrong within the guarrantee and was repaired. A product that is not used every day but now i come to use it ,it refuses to function. The firm that installed the unit has had it to pieces and replaced each part at different times but it still refuses to work, What do the experts suggest i do? I cant just throw away nearly 1000 euros, have you a solution. tony barton

Posted by on

  • bartonantony Jul 05, 2010

    Yes as I expected thank you- This may be helpful to you -- the above picture is nothing like ay-xp08cr that I have had installed,mine has an inverter on the roof .

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,416 Answers

Hello,

what you are advice to do is to get another technician because some company(technician) will fine it difficult to tell if the condition of the system (air condition)or you should think of get a better air condition

because if this condition cost 952 euros six year ago the you are expected to spend about 1000 euros on service or replacement along then it better to think about getting a new one
good luck

thank you and thanks for using fixya.

Posted on Jul 05, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,099 Answers

Hello,

This can be a bad situation if it’s really hot outside. There can be a few reasons why the AC does not start. First, check the power cord to confirm it is properly plugged in. If so, use another electric appliance in the same electrical outlet to see if the outlet is working properly. There could also be damage to the AC power chord because of which the Air Conditioner is not starting.

Whenever your AC stops working, it is easy to assume that it has short-circuited from overuse. Try turning it back on after a short cooling period and if it doesn’t work, there can be other problems involved. First, check to see if the timer is on. If it is, your AC might have stopped in obedience to its internal timer. Also, take note of the temperature of the room. If it is cool enough, it is possible your AC has stopped working because its temperature setting is at a higher temperature than the temperature in your room. Check your temperature setting and see if your AC doesn’t restart when your room temperature starts to rise again.


Hope this helpout....

Posted on Jul 05, 2010

  • bartonantony Jul 05, 2010

    Thank you for your comments. I accept what you say but because the firm cant get it put right, as a non electrical dummy I do not want to get involved in something I do not understand, do you know any expert in the Lagos area that would help me solve this problem. thank you for your time, Tony barton

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a terrible smell coming out of my Mitsubishi air-con.


after making sure it will drain properly the best way to permanently remove smells is to use a "ozone machine" or a ionizer this attacks the odor causing molecules and breaks them down. 30-60 minutes from a powerful unit will do the trick , most carpet cleaning companies that also do water repairs have these machines and their rates vary. alpine air also makes a home unit and these are good to use in the home 24/7 as well


Jun 05, 2012 | Mitsubishi MSZ-GE24NA Mr. Slim Wall...

1 Answer

My breeze AT unit comes on, but the fan does not move. how do I repair this


This unit has had multiple electrical problems probably due to cheap circuit board parts. I've sent many back for repair. Repair usually runs $242 last time I checked, or you could trade in for a new unit. They'll take $100 off the cost of a new one. Otherwise, you may be able to try taking it to a small electronics repair place. I don't believe it's that complicated but if the board is toast there's no repairing it.

Jul 19, 2011 | Ecoquest Breeze At Air Purifier

2 Answers

I have a Eqoquest fresh air air purifier, I had a flood and water was inside unit, insurance company wants to know cost to repair or if needs to be replaced, where do i go to get it deemed...


The simplest way is to do a Google Search for you make and model air purifier. You'll be able to see what they sell for now. I can tell you this though, if that unit was under water, it can't be repaired. It's been contaminated.

Feb 11, 2011 | Ecoquest Fresh Air Air Purifier

1 Answer

It started with the buttons on the front not working. Now the whole unit is dead, it is plugged in, but is not coming on.


Unfortunately, this sounds like a computer problem within the machine. It can only be serviced by Vollara (new name for EcoQuest). They have several options, one of which can get you basically a like new/refurbished machine at a VERY reasonable cost! (Less than you'd pay a local computer dealer for computer work!) Call customer service 1-800-989-2299, ask for repairs, and give 16618 as the dealer referral number (unless you bought from an authorized dealer with whom you are still in contact.) Hope this helps.

Jan 29, 2011 | Ecoquest Fresh Air Air Purifier

1 Answer

REPLACED FILTER AND THEN UNIT STOPPED WORKING


I was ready to send mu unit out to get repaired at the minimum cost of $ 179.00 and then saw JSEhandyman list a website for the manual. The manual was not only so simple to read an understand it saved me the time and money of having it fixed. It was a simple solution. I was putting new air filter in on the side and wrong way. THANK U SO MUCH
http://www.ecoquestintl.com/support/US50300_Living_Air_Owners_Manual.pd

Jul 22, 2009 | Ecoquest Living Air Classic Air Purifier

1 Answer

I have several ionic Breeze air purifiers that have problems


Unfortunately, there are no repair depots that are available for use since Sharp Image has claimed bankruptcy. these product are very unique in design and, the actual repair parts are no longer in stock. the suppliers went under when Sharp filed for bankruptcy.

You may be able to repair the wiring by ordering the identical gauge from you local electrician but, that's about it. most of the hardware is no longer available.


Jun 18, 2009 | Sharper Image Ionic Breeze 3.0 Air...

1 Answer

F50 air cleaner cells inoperative


Check for any of the metal layers in the cell to be touching or too close together. These units are very expensive to repair and to be honest the best option is to find a disposable box filter that will fill the hole.

May 01, 2009 | Honeywell Air Purifiers

1 Answer

Is my Ionic Breeze Quadra hopelessly broken and beyond repair?


This unit can be replaced on ebay for around $45.00 which is under any labor cost to repair the unit you currently have. You can always post your unit for sale on ebay for parts.

Feb 19, 2009 | Sharper Image Ionic Breeze® Quadra® 4.0...

7 Answers

Unit seems stuck in the "drying grid" mode


I had the same problem with my GP. It has worked great for four years and only recently seemed to get stuck in this drying cycle. I cleaned the grid many times, cleaned the wires, cleaned the whole unit as much as I could to no avail. The trick: You need to clean the two metal prongs and surrounding area that insert into the bottom of the grid, when you inserrt the grid. they are sharp like nails, so take care. Use an alcohol based cleaners and clean the prong and around each base. This fixed the problem for me and she's back up and running well.

Aug 31, 2007 | Sharper Image Hybrid GP (SI724) Air...

Not finding what you are looking for?
Sharp Plasmacluster FP-N60CX Air Purifier Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Air Purifiers Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Sharp Air Purifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...