Question about Eddie Bauer 22757MRC Convertible Car Seat

1 Answer

Car seat in Rear Facing Position takes up too much room in our car. Any suggestions.

Posted by on

  • melmay Jul 06, 2010

    Its not the width that is the problem. Its how far it pushes the front seat to the dash. We are using the base and followed all the instructions to recline it and make it level.

  • melmay Jul 06, 2010

    Neither of our kids is even close to big enough for boosters.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

We have 6 car seats for our 3 children; one in each vehicle. I moved the seats around so all three can fit in our CRV; however, if I would not have swapped the carseats, all three would not have fit in the CRV. In other words, be creative. When your child is old enough/big enough for a booster seat, those are smaller. I think I waited until my child was at least 3 for a booster, but they are worth the $30-$60 to save the room you need in the car if your child is big enough.

Posted on Jul 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have been given a baby go 7 car seat I need it to be rear facing the sticker says forward facing?


There are forward and rear facing baby car seats , the rear facing are the safest , they are not interchangeable , the seats must be fitted to the rear car seat and only to the approved mountings.

Aug 03, 2015 | Baby Gear

1 Answer

I have a new graco cleo car seat. What weight and age does my baby have to be before I shoud face it forward in the car?


Group 0 Until the age of 12 months (13kg/28lbs), your child must always be in a rear-facing position. Group 0+ car seats move from a reclined to a seated position, whilst perfectly supporting your child's back.
Group 0+ Until the age of 12 months (13kg/28lbs), your child must always be in a rear-facing position. Group 0+ car seats move from a reclined to a seated position, while perfectly supporting your child's back.

Group 0+/1 Children are unique and grow at different paces so category 0+/1 seats are highly flexible to reflect this. Babies up to 9kg (19 lbs) can travel safely facing the rear. From 18kg (39lbs) the seat can be adjusted so they face forward, allowing you to spend more time face-to-face with your baby which is an important part of parent-child bonding.
return to top
Group 1/2/3 The car seats in this category grow with your child from 9 months to 12-years old (9-36kg/19-79 lbs) so they can remain comfortable and importantly, develop properly. This flexibility makes it the ideal car seat category for large families and grandparents with grandchildren of different ages.

Group 2/3 A child must have a car seat that is tailored to their weight, height and age until they are 12 years-old, or 36kg (79lbs). The group 2/3 category offers convertible seats for older children aged between 4 and 12 (15-36kg/33-79lbs), this means the car seat grows with your child.


Hope this helps, I have a graco for my 12 week old, this info is from the graco website

Bye for now

Aug 04, 2011 | Graco Baby Gear

1 Answer

How am i supposed to get my child in the car seat when in the rear facing position the seat belt straps are around the sides of the car seat


The belt should run under the car seat not over it or on the sides. Take the car seat to an inspection station and have them install it properly. www.seatcheck.org

Apr 21, 2011 | Britax Marathon Convertible Car Seat ...

2 Answers

How do you install and know if its reclined. my son seems to be sitting too upright, he is only 6 months but already 21 pounds. he is appropriate weight wise. I have a 2006 explorer.


u could use the safety straps on the back. or you could run the seatbelt through the holes at the bottom of the car seat. check your users manual from your explorer to see where the safety hooks are. http://www.eddiebauer.djgusa.com/usa/eng/Instructions?ProductNumber=22790WPR

Jan 13, 2010 | Eddie Bauer 3-In-1 with Latch

1 Answer

How to loosen the straps on envenflo tribute carseat?


This is about all I could find for you. Hope it helps.
Had one - its a huge pain in the **** and I always busted my fingernails doing it. The metal clips have to slide over the bumps to get them out. I hated that thing. May I make a suggestion? Return it. lol . I'm figuring you got a combo seat - Evenflo Generations, Bolero, Chase, that is a forward facing only seat to 40lbs, or a convertible seat like Evenflo Tribute that is forward facing to 40lbs. Since I don't know her age its hard to make a suggestion, but for just a little more money (we paid $79 for our Chase) you could get a much better seat. If she needs a convertible that will rear face, get the Evenflo Triumph for $150 or less, The Evenflo Triumph Advance (not the original Triumph, make sure it says Advance) is a great seat. $150 version at Babies R Us has padding similar to Britax seats, top slots of 17", harnesses to 35lbs rear facing, and 50lbs forward facing. $120 Walmart version just has little less plush padding. Wide open belt path, easy to install, though it doesn't have built in lockoffs. The harness adjusts at the front of the car seat, you don't have to take the car seat out of the car just to raise/lower the straps. It's one of only 2 seats that does this (The Britax Boulevard is the other, I believE), and it has infinite harness adjustment so the harness always fits perfectly until its outgrown. No more tugging straps to tighten them either. You tighten and loosen the harness using knobs on the side of the seat. As a major bonus, it can be used in a recline position even in forward facing mode. Awesome for kids who still sleep in the car. I LOVE THIS SEAT! LOL My son, who is too big for every other car seat at Walmart has the same amount of room in this as the Britax Marathon.

If she is forward facing (over 30lbs and over 2years old) then a Graco Nautilus would be a lot easier to use and install, $150. Harnesses to 65lbs and then becomes a booster, will be the last seat you have to buy her. Metal reinforced.

Combo seats are usually a major waste of money, as they only harness to 40lbs, no more than most convertible car seats, so you're really not getting any more use out them then the convertible seat.

Jun 12, 2009 | Evenflo Generations

1 Answer

I can't fit my car seat rear facing


I am not from the U.K. but from personal experience Canada, you can go to your local police department or health unit if you have them there. there is a possibility that the fire dept lads will show you the best way to put the seat in as well.

you could also try here http://www.britax.com/ i did choose the uk site and it's down. be that as it may you can contact them regarding instructions as well.

Robert

Jan 02, 2009 | Britax Eclipse Si - Paris Convertible Car...

1 Answer

How do you install the car seat for rear facing?


Hey Just posting this for future reference for other people since I see that you posted over a month ago :) ..

To install the car seat in rear facing I used the latch system. (you can use the latch system if your vehicle has latches..they are tiny metal bars in between the seats)

First of all with this dumb car seat I found out that the latch system was not in the proper place so if you find that yours is not where the diagram shows (in the manual) then you'll have to take off the seat cover and manually put them in their place. Then go ahead and clip onto the latches in the rear facing position. If the car seat is too far forward then inline the seat. If the car seat is still not leaning far enough back to be level with the ground (there should be two level marks on the top/side of the car seat) place a rolled towel (or roll a 2x4 in a rolled towel like i did) then clip onto the latches. Hope this helps someone.

Nov 22, 2008 | Cosco Alpha Omega Elite 5-Point 22-155

1 Answer

I need to know how to position the straps for rear facing car seat


Here's the official manual:

http://www.babyage.com/icons/localhost/products/multimedia/26078_3591328.pdf

Nov 02, 2008 | Evenflo Comfort Touch Vanguard 5

1 Answer

Rear seat single latch


The latch that is on the top is called the tether strap. It is only used in the forward facing position.


Jul 06, 2008 | Eddie Bauer 3-In-1 with Latch

Not finding what you are looking for?
Eddie Bauer 22757MRC Convertible Car Seat Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eddie Bauer Baby Gear Experts

Jennifer Rock
Jennifer Rock

Level 2 Expert

135 Answers

woodzowl307

Level 3 Expert

652 Answers

ray gallant

Level 3 Expert

42828 Answers

Are you an Eddie Bauer Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...