Question about Baby Jogger (67064) Twin Seat Stroller

1 Answer

Wheel broken how do I get a new wheel

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Contact the manufacturer:
E-Mail: customerservice@babyjogger.com
Call: 1-800-241-1848 between 8am – 6pm EST, Mon. – Fri.
Fax: 1-804-262-6277
Mail: Baby Jogger Company
8575 Magellan Parkway
S uite 1000
Richmond, VA 23227

Here's the website you can puruse to possibly find the manual for your stoller and it might have a form in there to order a new wheel. I think you need a more complete manufacturer's number though or the model name since it is listed by model name and not the number.
http://www.babyjogger.com/manuals.aspx


GOOD LUCK!

Posted on Jul 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BLOWER WHEEL BROKEN


In your instruction manual you should find a parts list, purchase a new blower wheel and install it. If it is an older unit it may be best to just replace it.

Feb 12, 2014 | Frigidaire Dehumidifiers

1 Answer

Can I replace broken spokes on a bike wheel?


Yes they can be replaced take it to a bike shop or you can do it your self.

Apr 23, 2012 | Trek Cycling

1 Answer

I ve broken 2 lugs off right rear wheel i removed tire wheel and brake cover tried to pull wheel with wheel puller it is not moving am i proceeding correctly or do i need a bigger hammer


why are you trying to pull the ( wheel ) . If you need to replace the 2 broken lugs then all you need to do id hammer them back thru the ( wheel ) and go get 2 new ones that match those broken ones and hammer them back in from the back side of the ( wheel )

Sep 14, 2011 | 1997 Oldsmobile Achieva

1 Answer

How to replace broken stud of honda crv 2001 front wheel


remove wheel, brake assembly & rotor. rotate to where the broken stud is in the opening where the brake assembly was. drive the broken stud out of the hub flange. then install the new stud by stacking washers on the new stud and tighten the lug till it pulls the new studs flange tight against the back side of the hub. remove lug and washers , reassemble .

May 25, 2011 | Honda CR-V Cars & Trucks

1 Answer

Broken lug nuts


Get how ever many wheel bolt's you need and one more lug nut, you will used that one to press in new wheel bolt, any parts place will have these parts, remove tire with hammer hit broken stud till it come's out through the back side, put new wheel bolt and with extra lug nut press in bolt, hope this was very helpful.

May 20, 2010 | 2004 Ford F150

1 Answer

Broken wheel stud on the left front wheel-


Try spinning the hub around to different spots to see if you can wiggle it out.

Apr 08, 2010 | 1998 Honda Civic

1 Answer

Rear axle broken on Raleigh road bike, can i/ how do i replace it


Is it the axle in the hub or a skewer (quick release) that is broken? If it is the skewer, those can be replaced. If it is the hub (with a through-axle), then you would do best to buy a new wheel.

Sep 06, 2009 | Stickers Raleigh Mountain Road Tri Race...

3 Answers

Broken stud on wheel


The studs press out and in. Perhaps a hammer would work. Replacements studs can be purchased. Need to remove hub, of course.

Aug 13, 2009 | Hyundai Motor 2003 Elantra

2 Answers

Broken wheel stud front left 1992 honda accord


Only if there is an Acsess Hole Directly Behind the STUD'S PUNCH THE Broken SHORT one OUT But there May Not Be Enough ROOM FOR the NEW LONG STUD to go in between the HUB & Rotor Check this FIRST If you see GOOD CLEARANCE TO GET The new STUD in Then just Drive the old one out , and Use A LARGER than Stud Nut Or Washers to Pull New Stud Threw some Before Putting Wheel on. Then Put Wheel on And Tighten Wheel , Retorque after a Few Hundred Miles.

Mar 29, 2009 | 1992 Honda Accord

1 Answer

3 blinking lights no visual...just bought new color wheel


recheck those plugs from color wheel to dmd bd, when was the last time you replaced the lamp?

Oct 18, 2007 | Samsung HLN617W 61" Rear Projection HDTV

Not finding what you are looking for?
Baby Jogger (67064) Twin Seat Stroller Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Jogger Baby Gear Experts

Lyle Siemens
Lyle Siemens

Level 2 Expert

328 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

john h

Level 3 Expert

10910 Answers

Are you a Baby Jogger Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...