Question about Juki MO-644D Mechanical Sewing Machine

2 Answers

Do you know where can I get a user manual for my Juki LK -1852 bar tack sewing machine please? I have just bought this second hand and cannot find out how to - lift the foot - draw the thread through from the spool below

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Juki Expert
  • 176 Answers

Hi there
please send your email address i will send to you service manual for this machine.
best regards
ashraf abozid
aabozid@hotmail.com

Posted on Aug 21, 2010

  • 3 more comments 
  • jesssicat Sep 15, 2010

    Hey there ashraf :-)

    read your post about a Juki 1852 Bar tack machine User Manual.

    Have just purchased one of these fantastic nachines from auction and wondering if you still have user manual could email me too??

    Have also sent you an email to your address in the posting, tks abozid and have a lovely day!!

    Jess

  • TCHNICAL SUPPORT FOR JUKI-JACK-PEGASUS

    hi jesssicat
    can you but your email here? i don't know where can i send user manual. waiting ur email or i will try to uploade to shard or any site.
    best regards
    ashraf abozid

  • TCHNICAL SUPPORT FOR JUKI-JACK-PEGASUS

    hi jiesssicat
    please check ur email i sent to u what u want i hope it's help u .
    best regards
    ashraf abozid

  • dhernande458 Jun 27, 2011

    i want the manual too? can you send me to winnyporras@hotmail.com thanks

  • TCHNICAL SUPPORT FOR JUKI-JACK-PEGASUS

    HI
    PLEASE CHECK YOUR EMAIL.
    BEST REGARDS
    ASHRAF ABOZID
    CAIRO - EGYPT

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi
did you figure out how to lift the foot??
i have the same problem :-(

Posted on Oct 13, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manual backtack lever works but electronic servo backtack only engages when machine is at rest with needle in up position.


hello there
at normal case needle bar must be in upper position because DDL-8700/7 does not equipped with needle feed. for your problem please check back tack solenoid open and close when you make back tack ( sometimes it was jammed and need to move by hand ).
best regards
ashraf abozid
Cairo - Egypt
aabozid@hotmail.com

Aug 18, 2015 | Juki DDL-8700

1 Answer

Juki lk1903b machine is not working E7 is appers


HI
regarding JUKI LK-1903B Eror E7:
1-Machine lock error ( The main shaft of the sewing machine does not rotate due to some troubles ). please check if machine rotate smoothly by hand or not.
2-main motor problem ( AC servo motor problem ) motor part No.:401-38137.
3- check connection CN-15 / CN-17 from SDC board to main motor.
4 - problem in SDC servo board ( No output for main motor ). SDC servo board part No.:401-42267.
best regards
ASHRAF ABOZID
aabozid@hotmail.com
CAIRO - EGYPT

Apr 10, 2015 | Juki Sewing Machines

1 Answer

Juki Bar Tack Machine Cutter not working


I can't help. But I would recommend calling your local Juki Dealer for the name of a good repairman. Juki's are expensive you don't want to be futzing about if you aren't an expert.

Nov 29, 2012 | Juki Sewing Machines

1 Answer

How to set timing and bobbin in my juki ddl-555


hi there
when you need to set timing please first make sure height of needle bar is ok. there's two mark at needle bar, the upper one is for height of needle bar: bring the needle bar at lowest position and in this case the upper mark must be equal with lower needle bar bushing.
second : set timing
move hand machine pulley at the same rotation and when the lower mark equal with lower needle bar pushing the tip of hook must be at the center of needle groove and just light touch not hit. that's all
best regards
ashraf abozid
CAIRO - EGYPT

Nov 29, 2012 | Sewing Machines

1 Answer

My needle broke and I tried changing it, but don't remember if the pine hole goes in the front or the side. I have changed it both ways but still not sewing right. I don't have a manual. I am sorry my...


hi there
if you want user manual please go to www.juki.com under industerial sewing machine you can download instruction manual. concern how to attach needle i tell you ther is to saide long groove must be at ur left hand not front or rear and please remember any machine from which said u threading u must attach the needle with long groove in the same said u threading the machine.
best regards
ashraf abozid
aabozid@hotmail.com

Jun 12, 2010 | Juki DDL-8700

2 Answers

Need a juki lk-1900 ahs instruction manual


Catalog No. Machine Brand juki lk 1900

Aug 10, 2009 | Juki Sewing Machines

1 Answer

THREADING FOR JUKI MO 357


Put new needles in it.

Following the colors, thread the upper looper first, then the lower looper. Next thread the needles. Always thread in this order.


Jun 27, 2009 | Juki MO-644D Mechanical Sewing Machine

Not finding what you are looking for?
Juki MO-644D Mechanical Sewing Machine Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Juki Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Pete Alaniz

Level 1 Expert

13 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Juki Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...