Question about Konica Minolta bizhub 250 All-In-One Laser Printer

1 Answer

Faxing I just got a new bizhub 253 the other day and am trying to scan a document and send it as a fax. I also need to reduce the document to 81/2 x11. I thought I sent it but never recieved any sort of confirmation. Please help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 214 Answers

You can see job confirmations under job list, there you see, whats ok and whats not. also paper format you can choose under fax sending screen, before sending fax. probably you caan choose a default page format from utility - user/ admin settings

Posted on May 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Getting t-81 error when sending fax bizhub 652


Your country code is incorrect...you need to change it from JP to ZA

Oct 30, 2013 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Need instructions on how to send fax, it seem as though we are not following the correct steps


Solution: Sending faxes on an MX310

Sending Faxes

The operation flow of sending faxes is as follows.

  1. Load the original on the platen glass or on the Automatic Document Feeder (ADF).

    Platen Glass

    1. Lift the document cover (1).
    2. Place the original in landscape orientation and align the upper corner of it with the alignment mark (2) as shown in the figure below.

      t_00712.jpg
    3. Gently close the document cover.
ADF
  1. Remove any documents from the Platen Glass.
  2. Open the Document Tray.

    t_00913.jpg
  3. Load the document in the ADF.
    Load the document with the side you want to copy, scan, or fax facing up in the ADF.

    t_01014.jpg
  4. Adjust the Document Guides to match the document width.

    t_01115.jpg

  1. Press the button.

  2. Adjust fax settings as necessary.

  3. Start faxing.

    1. Dial the recipient's number using the numeric buttons or coded speed dialing.

    2. Press the button for color sending, or the button for black & white sending.

      Note: Color sending is available only when the recipient's fax machine supports color faxing.

    3. If the document was loaded on the Platen Glass, the following message will appear. Load the next page on the Platen Glass.

      ug_faxing93.jpg

    4. If you have only one page of document to scan, go to step 5.

    5. Press the same button as you pressed in step 4b.

    6. Repeat steps 4c through 4e until all pages of the document have been scanned in and then go to step 5.

  4. Press the button.

  5. To cancel sending a fax, press the button. To cancel sending a fax while it is being sent, press the button, then follow the instructions on the LCD.


Adjusting the Scan Contrast or the Image Quality (Fax Resolution)
Adjusting the Scan Contrast

Contrast is the degree of difference between light and dark. Increasing the scan contrast setting further blackens dark areas and whitens bright areas, whereas decreasing the contrast setting reduces the difference between bright and dark areas. You can adjust the contrast among three contrast levels.

  1. Press the button.

  2. Press the button.

  3. Press the (left) or (right) button to select the contrast.

    ug_faxing87.jpg

  4. Pressing the l_mark.jpg (left) button decreases the contrast, and pressing the r_mark.jpg (right) button increases the contrast.

  5. Press the button.

Adjusting the Image Quality (Fax Resolution)

You can adjust the image quality (fax resolution) of the document you send. The higher you set the image quality setting, the better the output quality will be at the other end, but the longer it will take for the transmission. Adjust the image quality according to the type of document you are sending.

  1. Press the button.

  2. Press the button two times.

  3. Press the l_mark.jpg (left) or r_mark.jpg (right) button to select the resolution.

    ug_faxing92.jpg

STANDARD:

Suitable for text-only documents.

FINE:

Suitable for fine-print documents.

PHOTO:

Suitable for photographs.


  1. Press the button.


Return to Start Faxing

Back to the Top of the document


Dialing the Coded Speed Dial

  1. Press the button.

  2. Press the numeric buttons to enter the two-digit code (00 - 19) assigned to the number you want to dial.

  3. Press the button for color sending, or the button for black & white sending.


    Note:
    *
    Color sending is available only when the recipient's fax machine supports color faxing.
    * To cancel sending a fax, press the Stop/Reset button. To cancel sending a fax while it is being sent, press the Stop/Reset button, then follow the instructions on the LCD.

Feb 04, 2011 | Canon PIXMA MX310 All-In-One Printer

1 Answer

How do I fax I have put the documents in the tray now what do I d


There's two way to fax, 1. you can lay the documents to be sent/faxed on the flatbed (scanning sheet bed) and fax it after selecting the Fax option from the menu and dial the receiver's number. 2. If in case your documents is larger than the flatbed, you can put it on the sheetfed tray, and follow the same procedures to send the fax, it'll automatically pull the document as it copies the files to the temporary memory. But in this case, you'll need to resize the document size, suppose if your scanner bed supports A4 and you are faxing Legal Size paper, reduce the size of the paper to fit on A4, (approx 10% will do). Good luck.

May 24, 2010 | HP OfficeJet J4580 All-In-One Laser...

2 Answers

How do you fax a document that is 11 by 14 inches?


Most fax machines and printers will scan and fax an 11x14 document. Just check your owners manual to see if any settings need to be changed AND contact the person you are faxing to let them know to put 11x14 paper in their machine, or some of the print may be lost if the fax will be printed on two 8x11 sheets.

If you don't have your owners manual, post a question and include the manufacturer and model number of your fax machine or printer and one of us will look it up for you.

Feb 10, 2010 | Printers & Copiers

1 Answer

Insstructions for sending a Fax on a Brother


You can find the entire user manual by clicking here:
http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_MFC_240C_EN_249.PDF

Or, here are the instructions for sending a fax:

Entering Fax mode 5

To enter fax mode, press (Fax), and
the key will glow green.

The LCD will show the new job number and
the memory available.The number of pages
you can scan into the memory will vary
depending on the data that is printed on them.

Faxing from the ADF 5
a Make sure you are in Fax mode .
b Put the document face down in the ADF.
c Dial the fax number using the dial pad.
d Press Black Start or Color Start.
The machine starts scanning the
document.

Note
• To cancel, press Stop/Exit.
• If the memory is full, the fax will be sent in
real time.

Faxing from the scanner glass5
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to letter or A4 size.

You cannot send multiple pages for color
faxes.



Make sure you are in Fax mode .

Load your document on the scanner
glass.

Dial the fax number.

Press Black Start or Color Start.
If you press Black Start, the
machine starts scanning the first
page. Go to step e.

If you press Color Start, the
machine starts sending the
document.

Do one of the following:
To send a single page, press 2 to
choose No. (or press Black Start
again).
To send more than one page, press
1 to choose Yes and go to step f.

Put the next page on the scanner glass.

Press OK.
starts scanning the page.

.

Dec 15, 2009 | Brother MFC 240C All-In-One InkJet Printer

1 Answer

I wanna send a fax


Hi there,
Sending Faxes.
* Flow of Sending Faxes.
The operation flow of sending faxes is as follows.
Step 1:
Load the original to send on the Platen Glass or the ADF.
Step 2 :
Adjust the fax quality and scan contrast.
Step 3 :
Dial the receipent' s number.
Step 4 :
Send Faxes
- Using the Platen Glass
1) Press the Color or Black button.
If you have two or more pages of the original, load the next page on the Platen Glass and press the Color or Black button
2) After scanning all the pages of the original, press the OK button to send the fax.
- Using ADF
1) Press the Color or Black button.
The fax is sent automatically.

* Before sending Faxes
- Adjusting the Scan Contrast or the Image Quality (Fax Resolution)
** Adjusting the Scan Contrast
Contrast is the degree of difference between light and dark. Increasing the scan contrast setting further blackens dark areas and whitens bright areas, whereas decreasing the contrast setting reduces the difference between bright and dark areas. You can adjust the contrast among the 3 contrast levels.
1) Press the FAX button, then press the FAX Quality button.
2) Press right or left arrow ot select the contrast.
Pressing the left arrow button decreases the contrast, and pressing the right arrow button increases the contrast.
3) Press the OK button.

** Adjusting the Image Quality (Fax Resolution)
You can adjust the image quality (fax resolution) of the document you send. The higher you set the image quality setting, the better the output quality will be at the other end, but the longer it will take for the transmission. Adjust the image quality according to the type of document you are sending.
1) PRess the FAX button, then press the FAX Quality button two times.
2) Press the right and left arrow keys to select the resolution.
FAX RESOLUTION - STANDARD
Standard : Suitable for text-only documents.
FINE : Suitable for fine-print documents.
PHOTO : Suitable for photographs.
3) Press the OK button.

*Sending Faxes - There are 4 methods for sending functions
a) Memory sending
b) Manual sending
c) Dialing the coded speed dial
d) Redial

a) Memory sending
1) Prepare for faxing
a) Turn on the machine,
b) Load the original on the Platen Glass or the ADF.
Note : You cannot scan double-sided documents from the ADF.
c) Press the FAX bitton.
d) Adjust fax settings as necessary.
2) Start faxing.
a) Dial the receipient's number using the Numeric buttons or coded speed dialing.
b) Press the Color button for color sending, or the Black button for black and white sending. I
c) When the following message is displayed, lad the next page on the PLaten Glass.
Scan Next -> Start
Transmit-> OK
If only one document go to step f).
d) Press the same button as you pressed in step b).
e) Repeat step c) and d) to scan in all pages of the document.
f) Press the OK button.

Manual Sending
1) Connect a telephone to the machine.
2) Prepare for faxing.
a) Turn on the machine.
b) Load the original in the ADF,
c) Press the FAX button.
d) Adjust the fax settings as necessary.
3) Lift the handset of the telephone connected to the machine.
4) Dial the receipient's number on the telephone.
5) Talk through the handset to the recipient.
If you hear a high-pitched signal instead of the recipient's voice, go to step g),
6) Ask the recipient to set recipient's fax machine to receive faxes.
7) When you hear a high-pitched signal, press the Color button for sending color sending, or the Black button for black & white sending. Then hang up the handset.

Dialling The Coded Speed Dial
1) Prepare for faxing.
2) Press the Coded Dial button.
3) Press the Numeric buttons to enter the two-digit code (00-19) assigned to the number you want to dial.
4) Press the Color button for color sending, or the Black button for black & white sending.

Hope this helps. Please rate my response.
Thanks
Have a good day.





Nov 27, 2009 | Canon PIXMA MX310 All-In-One Printer

2 Answers

I have a konica bizhub 200. We can send faxes out


As a first thing to try, with most faxes that send but do not receive, it's usually down to a glitch.

Try shutting the bizhub down fully, then unplugging it physically from the power source for at least 30 seconds. Plug it back in and turn the unit back on, then have someone try and send you a fax.

If this does not remedy your problem, please indicate with a follow-up comment.

Aug 28, 2009 | Minolta bizhub 200 Copier

1 Answer

Pc fax transmission problem for bizhub 750?


The only solution may be a very expensive "Fax server".

You must have the fax kit in order to translate your print file to the fax language.

Is like trying to send an email without a modem, you may have access to a network but cannot talk the language required.

Feb 12, 2009 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Faxing/scanning from AIO 964


throw it in the dumpster and buy a new one

Mar 03, 2008 | Dell Photo 964 All-In-One InkJet Printer

2 Answers

Setting up fax machine to receive


Receive Mode Setting
On the operation panel, press the following buttons to select the appropriate receive mode.
  1. Press <Fax>.

  2. Press <Menu>.

  3. Press the right or left arrow button to select [Receive mode set], then press <OK>.

  4. Press the right or left arrow button to select the receive mode that best suits your needs, then press <OK>.


    FAX ONLY MODE: When you want to receive only faxes automatically with your machine, or have a dedicated telephone line for FAX use only.

    MANUAL MODE: When you receive mainly voice calls and sometimes faxes, or want to receive faxes manually.
    ANS MACHINE MODE: When you want to receive voice messages on your answering machine and receive faxes automatically.
    FAX/TEL AUTO SW: When you want to receive faxes automatically as well as voice calls.
    DRPD: When you have subscribed to a DRPD service with your telephone company.

  5. Press <Stop/Reset> repeatedly to return to fax standby mode.

Sending Methods Sending From Your Machine (Memory Sending)
  1. Load the document on the Platen Glass or the ADF.

    05sj00199_01.jpg
    Sending from the platen

    Important: When sending a double-sided document, set the document on the Platen Glass. You cannot scan double-sided documents from the ADF.


    mp830_adfguides.jpg


    Sending from the ADF

    *MP830 shown

  2. Press <FAX>.

  3. Adjust the settings for your document as necessary.

  4. Dial the recipient's number using the numeric keys or speed dialing.

  5. Press <Color> for color sending, or <Black> for black & white sending.

    • When the document was loaded on the Platen Glass:

      1. When the following message is displayed, load the next page on the Platen Glass.

        nextpagelcd.gif

        If you have only one sheet to scan, press <OK>..
      2. Press <Color> to send in color, or <Black> to send in black and white.

        IMPORTANT: If you do not press the same button you pressed in step 5, the machine does not start scanning.
      3. Repeat steps 5a and 5b to scan in all pages of the document.
      4. Press <OK>.

    • When the document was loaded in the ADF:

      The machine starts sending automatically after the document is scanned in.

      Note: Color sending is available only when the recipient's fax machine supports color faxing.
  • To cancel sending before sending a fax, press <Stop/Reset>.
  • To cancel memory sending while sending a fax, follow any instructions on the LCD after pressing <Stop/Reset>.
  • If the document remains in the ADF after pressing <Stop/Reset> during sending a fax, press <OK>. The remaining document is automatically fed out.

Sending From Your Machine (Manual Sending)
Use manual sending when you want to talk to the recipient before sending a document, or if the recipient does not have a fax machine that can receive automatically.
Caution:
  • With manual sending, you cannot use the Platen Glass to send documents.
  • You will need to connect a telephone to your machine if you want to talk to the recipient before sending a document.
Follow this procedure:
  1. Connect a telephone to your machine if you want to talk to the recipient before sending a document

  2. Load the document in the ADF.




    mp830_adfguides.jpg
    Sending from the ADF

  3. Press <FAX>.

  4. Adjust the settings for your document as necessary.

  5. You can lift the handset if one is connected to the machine.

  6. Dial the recipient's number using the numeric keys or coded speed dialing.

  7. Talk through the handset to the recipient. (If you hear a high-pitched signal instead of the
    recipient's voice, go to step 9.)

  8. Ask the recipient to set recipient's fax machine to receive faxes.

  9. When you hear a high-pitched signal, press <Color> for color sending, or <Black> for black & white sending. Then hang up the handset.

Jan 07, 2008 | Canon PIXMA MP530 All-In-One InkJet...

Not finding what you are looking for?
Konica Minolta bizhub 250 All-In-One Laser Printer Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...