Question about Intex Automatic Salt Water System for Above Ground Saltwater Pool

1 Answer

Have no owners manual and can't figure out how to set the timer!

Yea I have an Intex Krystal Clear cg-56601 model number 8110 delux salt water system and I did not recieve an owners manul but I need to know how to set the timer as i cannot get it off standby, code 88. Can you please help me?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

Code 88

Is the Setup/Start up Code. it is displayed until you set the timer. which you do so by holding down the down arrow till you hear a beep, then hold down the up arrow till you here a beep. from there you can set the time and then to lock it in repeat the process

If you need the manual you can email Intex at www.email.intexstore.com
Or you can buy the manual on this link below.

http://home-and-garden.become.com/intex-krystal-clear-deluxe-saltwater-system-salt-in-pool-model-8110-owners-manual--compare-prices--sc906782580

Good Luck and please rate 4 thumbs up for the free answer.

Posted on Jul 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you reset the RCD/GFCI on Krystal Clear Salt Water System CS8100


Mine is located in the power cord, near the plug end, built into the power cord itself. If not there, then consult your owner's manual or look on the Intex website for the manual.

Jun 30, 2014 | Intex Krystal Clear Saltwater System...

1 Answer

I turned on salt water system and stays on 88. I cannot find my owners manual. My water is turning green. Model 8110


Here's the link where you can download the manual for the 8110... Click on the english version flag next to your model number and a PDF of the manual will download... Enjoy and good luck.. If I helped, please rate me...Thanks...

http://www.intexcorp.com.hk/proifv/proifv_dl_client.jsp?hid_windowname=null&lst_docsea=2011&source=intexstore&gid=2&lid=14313&hid_windowname=null

Jul 29, 2011 | Intex Automatic Salt Water System for ...

2 Answers

My Krystal Clear Deluxe Saltwater System Model 8110 is not turning on


My pump works, but it wont turn to chlorine, so it then turns the water green, i looked everywhere and cannot find a solution, anyone that can help that would be great.

Apr 23, 2011 | Intex Automatic Salt Water System for ...

1 Answer

The filter wasn't changed for a couple of weeks and lots of leaves fell in our pool, I changed the filter put more salt but the pool water is getting greener and greener every day, what can I do? Intex...


Shock your pool ... take it to about 20 ppm and run the filter 24 hours a day. Brush the sides. When the pressure goes up 10 lbs over fresh start pressure, backwash or clean your cart as appropriate. Is your salt cell calling for more salt? Salt is persistent in the water (like CAL, salt doesn't just go away. The only way you loose either is by splash out and/or backwash.) If you dont know the level and your cell will not tell you, get tghe level checked at your pool place. You should have around 3200 ppm salt. Dont expect your salt system to keep up with the green stuff when the green stuff is established. You MUST use dry or liquid CL to overcome. You MUST brush the pool sides and bottom. You must run the filter 24 hours.

Between the green stuff and the sun, the CL your cell is making is consumed almost as fast as you make it.

Get your Cyanuric acid level to 80 ppm.

I hope this helps you ... Thanks for your interest in FixYa.com

Jul 31, 2010 | Intex Krystal Clear Model 635 Pool Filter...

1 Answer

I don't know hw to assemble the pump and accessories. i need inst


The pump is assembled as this photo shows. This is my pool. I have an owners manual so if you list the size of your pool I can provide information on amount of salt required and hours of operation each day. 8e665e2.jpg

May 30, 2010 | Intex Automatic Salt Water System for ...

Not finding what you are looking for?
Intex Automatic Salt Water System for  Above Ground Saltwater Pool Logo

2,099 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intex Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

Mike

Level 3 Expert

4336 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you an Intex Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...