Question about Jacuzzi MAGNUM POOL PUMP 1-1/2 HP MAGNUM PUMP BY

2 Answers

I HAVE A MAGNUM FORCE PUMP. iT WAS RUNNING THIS

I HAVE A MAGNUM FORCE PUMP. iT WAS RUNNING THIS MORNING FINE. CAME HOME IN THE AFTERNOON AND POOL WAS NOT RUNNING. TURNED OFF PUMP (REALLY HOT) AND WAITED ABOUT 20 MINUTES. WHEN I HIT THE SIWTCH IT JUST HUMS. I REPLACED CAPACITOR TWO YEARS AGO. OVERALL PUMP AND MOTOR IS 10 YO.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a jacuzzi 1.5 moter about 3 years old, it run for about 1 hour heats up and shuts off while also turning the breaker off...

Posted on Jun 01, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 760 Answers

It could be the capacitor again, but most likely if it stopped while running, its not that, unless you had a brief power failure. The motor may have a built in thermal overload which turned the pump off. If it only humms then it could either be locked up by something in the impller, or could be the bearings in the motor have failed. If the motor doesn't smell "burnt" then you might stand a change to disassemble the pump. Disassemble the motor and replace bearings. Replace the mechanical seal while you have it apart. OR you could buy a new motor, as it is 10 years old.

Posted on Jul 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My jacuzzi magnum force pump is hot is this normal?


the pump is pumping and circulating hot water into jacuzzi, it will get hot. I think it is ok

Jul 06, 2012 | Jacuzzi Magnum Force Series Pool Pump 1...

1 Answer

Pool pump running low psi


your pump should be just fine once the water starts flowing again. You may have run it too long without enough water to cool the seal.
If it is leaking water between the Jacuzzi Pump housing and the motor then you will need a new pump seal. Those are common pool parts.

Rod
US Parts Center
888-521-6183

Jun 09, 2012 | Jacuzzi Magnum Force Series Pool Pump 1...

1 Answer

I need a motor end cover, where can I get one? Thank you!


Jacuzzi (Carvin) Magnum, Force & Plus pump parts are hard to find.
Here is a link to our site which has a parts explosion/diagram for those pumps.
Jacuzzi Magnum, Magnum Plus, and Magnum Force Pumps

Jun 08, 2011 | Jacuzzi MAGNUM FORCE POOL PUMP 2 HP...

1 Answer

Hi I have a magnum 1000 Jacuzzi pump for my


alot of companies use to have a damper ring on pump shaft which would knock down some of the noise a pump motor made pumps make noise and the bigger the pump the louder the noise if its not vibrating or clunking then its running as it should

Apr 21, 2010 | Jacuzzi MAGNUM FORCE POOL PUMP - TWO SPEED...

1 Answer

Our Jaccuzzi Magnum Force pump extremely low pressure


Giving it a good cleaning probably clogged the pump impeller. If you vac'd the pool and the pump basket was packed with debrie it probably passed through and clogged. Split the pump and inspect the eye of the impeller. Low pressure means low flow.

Aug 26, 2009 | Jacuzzi MAGNUM FORCE POOL PUMP - TWO SPEED...

1 Answer

Jacuzzi Magnum Force Pump not working


The number one problem is air leaks.......check all connections to see that they are tight, and rubber seals. The intake side would give you trouble with air leaks. If you dont find any leaks then I would pull the pump cover and check the impellor. Pool stores have parts and lots of knowledge.

Jun 09, 2009 | Jacuzzi MAGNUM FORCE POOL PUMP - TWO SPEED...

1 Answer

Magnum Force Jacuzzi Pump stopped working


No serviced by pool technician. But you can look in your breaker box for a popped breaker, it should be 20 amp and be positioned in the middle instead of on or off position. Kirk

Dec 28, 2008 | Jacuzzi MAGNUM FORCE POOL PUMP - TWO SPEED...

Not finding what you are looking for?
Jacuzzi MAGNUM POOL PUMP 1-1/2 HP MAGNUM PUMP BY Logo

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jacuzzi Garden Experts

john h

Level 3 Expert

12650 Answers

Jay Finke
Jay Finke

Level 3 Expert

1358 Answers

Ian Kime
Ian Kime

Level 2 Expert

77 Answers

Are you a Jacuzzi Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...