Question about Denon AVR-1906 Receiver

1 Answer

My denon receiver turns off when I turn it on. How d I fix it.

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 99 Answers

Replace all the electrolytic capacitors in the power supply. i had the exact same problem with mine and once i replaced the capacitors it powered up and stayed on and worked perfect.
these capacitors tend to fail as they're of poor quality.
this fault is very common on denon receivers, especially the later models.

hope this helps?

Posted on Jul 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All 4 hdmi ports stopped working on Denon receiver, how do I fix it


Have you checked to make sure it didn't restart your entire system? If not you'll have to double check everything is connected correctly, turn everything on, and change the channel on the TV back to whatever Composite video or HDMI setting it was plugged into...then make sure the Denon receiver is set to Cable

Aug 22, 2014 | Denon AVR-591P 5.1 Channel A/V Receiver

1 Answer

Can't turn on my DENON-avr2500


There is a internal problem with it, It is impossible to fix it with out haveing to replace certain things in it,

Dec 03, 2012 | Denon AVR-2500 Receiver

1 Answer

H/p only displays when I turn the Denon 1707 receiver on. Speaker A nor B turns on. How do I fix this? Thanks, Bruce Krohn


HeadPhone Only, the jack is probably dirty , the dust shorts the relay and cuts the speakers out, compressed air (or a good set of lungs) directed down the headphone jack should fix it.

Jul 05, 2010 | Denon AVR-1707 Receiver

1 Answer

Denon AVR older receiver but worked fine; now


Did you try to reset the unit? Resetting the unit has fixed every problem I have ever had......turn off unit.....hold down A+B at the same time then turn the unit back on...hold buttons for roughly 3 seconds....Let me know if it works.

Aug 20, 2009 | Denon AVR-1908

1 Answer

Receiver turns off in a few secondsafter switching on


read in the manual and reset the system. if it still doesnt turn on, then it has to be taken in for repair. same thing happened to mine

Apr 25, 2009 | Denon AVR-2805 Receiver

1 Answer

Denon DRA 397 Won't Turn On


me too did you ever get it fixed

Dec 16, 2008 | Denon DRA-397

1 Answer

Power wont stay on


Hope your under warranty mate and if so hope its not in Australia as they cannot fix this problem. My denon was allegedly fixed twice but has now failed a third time (just out of warranty) and denon have turned their back on me.
SHAME ON YOU DENON.

Jul 08, 2008 | Denon AVR-2105 Receiver

1 Answer

My denon reciever display wont't work


I read something the other day in the user manual about re-setting the microprocessors if the display doesn't display properly. Turn the amp off.  Hold down the input mode & analog buttons while turning power on. The whole display should flash on & off at 1 sec intervals, then release the two buttons. This resets the microprocessors & supposedly fixes display problems.

Jun 23, 2008 | Denon AVR-2805 Receiver

1 Answer

Radio won't work on my Denon Receiver


Hook up a Small piece of wire Coming off the #00 ohm input for ant also put it in Mono mode first and you should be able to Hear Hiss Then tune Let me Know ttech

Jul 20, 2007 | Denon AVR-2106 Receiver

1 Answer

Powers turns on then off


See: http://www.denon.ca/hapdfs/avr2105mane.pdf, page 72. In my case, the problem was a connector between my receiver and television. I unplugged it from my receiver and it now works.

Dec 03, 2006 | Denon AVR-2106 Receiver

Not finding what you are looking for?
Denon AVR-1906 Receiver Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5126 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...