Question about Mitsubishi WD-52525 52" Rear Projection HDTV

1 Answer

I have a wd52525 the status light keeps blinking

I have a wd52525 the status light keeps blinking and it will not turn on

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

There are 3 different LEDs on the front of this televison. The TIMER will blink green. The STATUS will blink orange and the LAMP will flash red or orange depending on if there is a failure or if the lamp timer is showing over 5000 hours.

If I answer your question directly and the status is blinking a steady orange light, then you have left the side filter cover or the front lamp cover off or they are loose.

Also holding the menu and device buttons together until the timer light blinks will reveal a code that will help in diagnosing your problem. Goodluck.

Posted on Jul 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause the status light to blink and the projector not turn on. NEC-NP50


Could be a bad power supply, or lose connection try another one

Aug 14, 2014 | NEC NP50 Projector

1 Answer

Mitsubiushi wd52525 nstatys ligts keeps blinking green. Lost power when the TV was on and now i have a status light that just keeps blinking green.


Unplug for a minute, when pluged back in light should blink for a few then go out, should be able to power on after that!

Dec 25, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Mitsubiushi wd52525. Status light keps blinking..No fan or image


If it blinks yellow the air filter cover is open or the safety switch on the door is defective. If it blinks red then one of the fans has quit working

Dec 20, 2009 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

Mitsubishi WD-62525 yellow blinking status light


Check that the lamp door is closed all the way. There is a saftey switch that closes from the door being on all the way. If not the status light will keep blinking. There is also a switch on the air filter door.

Jul 13, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

I need the schematic for mitsubishi television wd52525


go to www.blinking-green-light-of-death.com
it shows available.

Nov 02, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Mitsubishi WD-62525 Red Status Light After Cap Replacement


maybe this help you, let me know. good luck

ok here new tips on v26 chaiss cust install new oem lamp with led lamp just blink only many time install new balister still shut down no audio no hv at all come with code 34 for test turn out to be that in power supply ther caps that wher blow up 3300 mf at 16v two them c9a38 ad c9a36 both same also note c9a62 1000mf at 16v thru c9a52 ad c9a82 ad c9a61 all 1000mf at 16v install 63v at 1000mf all same with both 3300mf at 25v fix the set now turn on with great pix cust old lamp too dark for pic install new lamp pic better ad reset lamp timer all good cust happy that cust got from mist the power supply board from looking from back of the set on left hand side all way in front u hav pull whole dmb bd to get to it want lets yu guys know[john leyva american video service center ] the right model number is this WD52525 HIT BAD KEY THIS RIGHT MODEL NO WD52525

Sep 09, 2008 | Televison & Video

1 Answer

Ipod nano 2nd ed 1Gig


If the status light blinks orange when you press a button, the iPod shuffle buttons are
disabled. Press and hold Play/Pause (’) for about three seconds, until the status light
blinks green.

Sep 18, 2007 | Apple iPod shuffle Second Gen. Silver (1...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

1,439 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1208 Answers

The Knight
The Knight

Level 3 Expert

73647 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...