Question about Welding Tools

1 Answer

I want to know the meaning of code 6010,6013 and 7018.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 760 Answers

The first two numbers are the streangth. (60=60,000lbs) the 3rd is the posititon 1 : Flat, Horizontal, Vertical, Overhead.2 : Flat and Horizontal only.3 : Flat, Horizontal, Vertical Down, Overhead. The fourth digit is the current and coating 1 : DC:ROD+ ................... cellulose sodium
2 : AC or DC:ROD+ or DC:ROD- .. cellulose potassium
3 : AC or DC:ROD- ............. titania sodium
4 : AC or DC:ROD- or DC:ROD+ .. iron powder titania
5 : DC:ROD+ ................... low hydrogen sodium
6 : AC or DC:ROD+ ............. low hydrogen potassium
7 : AC or DC:ROD+ or DC:ROD- .. iron powder iron oxide
8 : AC or DC:ROD+ ............. iron powder low hydrogen See this attached link:

Posted on Jul 04, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I've gotten a code 12 on my 95 grand Cherokee orvis. I've read that it means the battery or power to the ECM disconnected in the last 50 key cycles. I don't know what that means exactly. Any help?

It means the Engine Control Module knows that it should contain some history and it doesn't, so it throws up a Code 12 error code to let you know. It should go away after it has been driven a week or so. If it doesn't go away, go to your local friendly garage, smile sweetly and ask them if they wouldn't mind clearing the code. It takes about 30 seconds with a card reader and they will do it for you free of charge.

Jun 12, 2016 | Cars & Trucks

3 Answers

What does the code p0012 mean

Hi Craig, hope your doing well today. The code you have P0012 means: Camshaft Timing Over-Retarded. It could be the Camshaft Position Actuator on Bank 1 or Computer and even Wiring Related. Without checking it out there is no way of knowing which is the problem. Unless you have a lot of money and just want to try the actuator, I suggest you have it checked out. Hope this helps and have an awesome day Craig!

Jun 03, 2014 | Ford Taurus Cars & Trucks

1 Answer

Code U11OE

Google the code


Open Can Bus & ambient temp sensor issue

Sep 01, 2013 | Chrysler Pacifica Cars & Trucks

1 Answer

What does a po 720 mean for a plymath grandvoyager

P0720 Output Speed Sensor Circuit Malfunction :in case you would like to know in detail whats causing this :for future use in wanting to know other code meanings

Sep 20, 2012 | Cars & Trucks

1 Answer

How do i get the codes and what they mean for a 04

Go to your local autozone or advance auto. They will scan the codes for you. Write down the codes, then google them. The OBD-II codes are based on a universal chart, with only a few exceptions. You can also post back here, and someone here will teach you what each code you encounter means, and suggest solutions to take care of the issues.

Jul 22, 2010 | 2004 Chevrolet Silverado

2 Answers

What does code P1405 mean ?

p1405 is a egr code (upstream hose off or pluged)

May 04, 2010 | 2000 Mercury Sable

1 Answer


You need to provide make and model in order to know what the codes mean. Manufacturers use different codes

Oct 28, 2009 | Kitchen Ranges

1 Answer

I need to know what a code means for a 1996 ford

Transmission Mechanical Failure - First and Reverse

Mar 11, 2009 | 1996 Ford Windstar

Not finding what you are looking for?
Welding Tools Logo

Related Topics:

452 people viewed this question

Ask a Question

Usually answered in minutes!

Top Welding Tools Experts

Brad Brown

Level 3 Expert

15642 Answers


Level 3 Expert

76132 Answers

Bill Boyd

Level 3 Expert

42705 Answers

Are you a Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides