Question about Sanyo DS20930 20" TV

4 Answers

My Sanyo TV DS20930 wont turn ON at all

Ive tried other power outlets and it is the same,i tried al son use the power buttom on th tv instead the remote but it doesnt make any difference

Posted by on

  • tj1sooners Oct 25, 2008

    after a power outage the TV would not restart, electricity will jump to the plug if you unplug it then plug it back in. the power button sounds the same either plugged in or not plugged in,if you push it manually. there are no lights on the tv and i don't have the original remote just a universal. Is there a reset button or fuse that could have blown or tripped? thanks for the help

    Terry

  • Anonymous May 07, 2009

    my sanyo tv is the same, i wanted to use for my bedroom just to watch dvdz, but when i plug it in and switch it on nuthing comes on, its jst has pitch black screen, it doesnt turn on, i dont no what to do, because the shop i bought it from has now closed down.



×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Try unplugging for the power source for 60 seconds hold in the power for 10 seconds then plug the power cord while you are hold int power button in then release the power button... now try it (turn it on)

Posted on Nov 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

Are there any indications of any action at all? For example, a standby light? Does the set click at all?
Dan

Posted on Apr 17, 2008

  • ABRsvcs Apr 17, 2008

    If you could respond to the questions, I'll be able to help. There are too many possibilities for me to list without trying to narrow down the search.

    Thanks,

    Dan

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No nothing just the spark at the wall plug

Posted on Nov 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

No no lights, no sounds, no nothing.

Posted on Oct 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Television


Try unplugging it from the outlet for a 5 minutes, and try again. If that doesn't work - try plugging in a lamp to the outlet to make sure it works. You can also try connecting the TV to a different outlet (check fuses or circuit breakers). If you use a remote - change the batteries - or try using the power switch on the TV itself.

If it doesnt work - provide the brand and model of your TV.

Apr 11, 2014 | RCA Televison & Video

1 Answer

TV sound off and on


If you have tried using different input devices, looked for loose contacts
in power outlet, RC Jack, cable and connectors, the TV might need service. Also look for any jammed buttons on remote.

Aug 26, 2012 | Panasonic Viera TH-42PX80U Plasma TV

1 Answer

I have a TH-42PX80U. The picture went black and the red light does NOT blink. I tried a different power cord in a different outlet and still won't turn on.


More likely to have power supply module failure, that will be the first place to look.
Most common failures in PLASMA TV are due to bad power supply module, Z and Y Sustain modules.

Dec 23, 2010 | Panasonic Viera TH-42PX80U Plasma TV

1 Answer

Program Optoma EP-739 remote to Bell Express Vue 3100 remote


1 - Hold the clear tv buttom until all 4 light flash red
2- Press the red tv buttom
3- Press the amount of time needed on the up cursor ( around select buttom) until your tv shut down
4-When the tv goes off press the search buttom ( at the end on the right side )
5-Press record

Then u can use the red tv buttom to control ur tv and u can control the volume on satelitte mode without going back to tv mode , if u press too much time while searching the code and the tv wont light back , do the same thing but instead pressing the up cursor press the down one to go back on the code it will be faster .

Feb 23, 2009 | Optoma EP739 Multimedia Projector

1 Answer

I have a bell express vu remote that i am trying to get to work with one of your tv's. the remote is a 3.2IR the model number of the tv is 20pt634v37or 2opt634v37 can u please help me figure out wut the...


1 - Hold the clear tv buttom until all 4 light flash red
2- Press the red tv buttom
3- Press the amount of time needed on the up cursor ( around select buttom) until your tv shut down
4-When the tv goes off press the search buttom ( at the end on the right side )
5-Press record

Finish :)

Then u can use the red tv buttom to control ur tv and u can control the volume on satelitte mode without going back to tv mode , if u press too much time while searching the code and the tv wont light back , do the same thing but instead pressing the up cursor press the down one to go back on the code it will be faster .

Jan 06, 2009 | Directed 434MHZ Remote Control

2 Answers

Remote codes


1 - Hold the clear tv buttom until all 4 light flash red
2- Press the red tv buttom
3- Press the amount of time needed on the up cursor ( around select buttom) until your tv shut down
4-When the tv goes off press the search buttom ( at the end on the right side )
5-Press record

Then u can use the red tv buttom to control ur tv and u can control the volume on satelitte mode without going back to tv mode , if u press too much time while searching the code and the tv wont light back , do the same thing but instead pressing the up cursor press the down one to go back on the code it will be faster .

Jan 03, 2009 | Bell SH50102 Remote Control

2 Answers

Bell express vu remote codes for soyo tv


1 - Hold the clear tv buttom until all 4 light flash red
2- Press the red tv buttom
3- Press the amount of time needed on the up cursor ( around select buttom) until your tv shut down
4-When the tv goes off press the search buttom ( at the end on the right side )
5-Press record

Then u can use the red tv buttom to control ur tv and u can control the volume on satelitte mode without going back to tv mode , if u press too much time while searching the code and the tv wont light back , do the same thing but instead pressing the up cursor press the down one to go back on the code it will be faster .

Jan 02, 2009 | Soyo Crystal DYLT032B 32 in. LCD...

1 Answer

The TV will not power on with remote or manual button


Have you had any major power outages in the days leading up to this issue? It could be a power source, cable or outlet. Try different outlets if you can and see the tv responds.

Best of luck,

Al

Apr 18, 2017 | Cyberhome CH-LCTV 150 15 in. LCD...

1 Answer

Doesnt reconize


chad, you need to turn on your sansa and then connect it

Jul 24, 2008 | SanDisk Sansa e250 MP3 Player

1 Answer

My Sanyo TV DS20930 wont turn ON at all.


With no standby voltage at all neither the remote nor the front button will work. With no indication at all, the first thing to look at is the standby power supply. If you are comfortable working inside the set, there are a few things you can check. If not, you need to deternine how much you want to spend on the set. Figure on a cost of about $50 or so to get a repair estimate. If you'd like, get a detailed estimate, post the results here and we can walk you through the actual repair.
Keep us posted.
Dan

Apr 17, 2008 | Sanyo DS20930 20" TV

Not finding what you are looking for?
Sanyo DS20930 20" TV Logo

Related Topics:

543 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73159 Answers

 Grubhead
Grubhead

Level 3 Expert

4946 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...