Question about Motorola Mobility MD41 Expandable Handset for MD400 Series

1 Answer

Motorola MD400 Had phone for years, no problems. Today, I can't dial out and it does ring for incomming calls. Screen says "searching" or "out of range". Tried to regiser by holding the page button. Screen says "registration failed"...any advice??? THANKS!

Posted by on

  • chad069 Apr 17, 2008

    Sorry! Does NOT ring for incomming calls.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Take battery out of handset for one minute.
Unplug base unit (power and phone line) for one minute.
Plug base unit back in (power and phone line).
Put battery back in handset. Place hangset on base for
one minute. This got my phone up and running.
I had no battery power in the base unit, but if I did, I think
you have to remove those as well.

Posted on Apr 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No dial tone cant make calls


No dial tone and inability to receive ring signals are symptoms of connection problems. The installation instructions should indicate how your telephone system should be connected to the network.

Dec 30, 2013 | Phones

1 Answer

No dial tone phone jack tested ok phone rings incoming call when you pic up nobody. changed battery still no dial tone or conection on incoming call


This is caused by a failed wireless signal transmitter in the base station or a failed wireless receiver in the handset, these phones are not repaired unless they are under warranty, so all you can do is replace it, this is the #1 PROBLEM WITH ALL CORDLESS PHONES.

Mar 22, 2011 | Clarity C410 Cordless Phone

1 Answer

Incoming calls: When we receive an incoming call,


Extension call forwarding is controlled by a timer, and they put these things in the manual. If your CF after 2 rings is from a call to a specific extension, from that extension, dial *713 and a 2 digit number from 00-99 seconds on the intercom. Start with 18.

If your call forwarding is from intercept, then you have a system programming issue and need to look in the installer's manual or check with your system programmer.

Carl

Dec 01, 2010 | Panasonic KX-T7633 Corded Phone

1 Answer

I have a Motorola cordless phone system but lost the power cord to the base unit. How can I get a replacement? MD7161


You can either ring the manufacturer for the part.
But this is expensive, or try on ebay for a decent price.
Hope it helps!

Dec 31, 2009 | Motorola Mobility MD41 for MD400 Series...

1 Answer

1 lines is ringing & another is not ringing


Somewhere you should have a programming and operating manual for your phone system. Typically in a Panasonic you turn on CALL WAITING for both Intercom and Outside lines via a code you dial at each phone on the intercom (7311# 7321# for a TA).

This is assuming that the lines are already programmed to ring at the phone.

Carl

Aug 21, 2009 | Panasonic KX-T7730 Corded Phone

1 Answer

Disconnects incoming calls after one ring


The problem may be a short on your line. (Have the local Teleco check your line.) If you have other phones, you may want to check them for dial tone(DT) when this happens. If you have no DT, your cordless may be the problem...unplug, and let charge overnight. If problem continues, replace the battery in cordless, or discontinue use.

Apr 29, 2009 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

No dial tone - phone rings for incomming call but I can't hear or talk


This can be a problem with your handset.
Have you tried a different phone in that same jack?

Apr 17, 2009 | Phones

1 Answer

Cannot get dial tone


try to make an incoming call to the phone in question by dialling the phone number from a mobile or whatever.if the phone does not ring then the line itself is not connected or has a wiring problem.
so if no dial tone and no incoming calls then check the line itself

Dec 20, 2008 | Phones

1 Answer

INCOMING CALLS


Swap phones with a known working one. If it is really the position, you'll have to read the buttons. Go to a working location and dial PROGRAM 99 press the buttons and write down what they say (ie CO1 CO2 etc).

Then go to the non-working phone, press program 99 and the same buttons. If they don't say anything, then dial 0 01 store
press the next button and dial 0 02 store, etc. Do that on all 6 line buttons.

With luck, the phone will remap to the proper lines.

Carl

Aug 22, 2008 | Panasonic KX-T7433B Corded Phone

2 Answers

MD481 does not ring when incoming calls come thru and answer maching does not pick up.


try going to this link and looking for additional seetings for your phone or troubleshooting instructions-link is for complete user manual for your phone
http://www.usersmanualguide.com/motorola/cordless_phones/md481

Dec 20, 2007 | Motorola Mobility MD481 Cordless Phone

Not finding what you are looking for?
Motorola Mobility MD41 Expandable Handset for MD400 Series Logo

Related Topics:

558 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Phones Experts

Ngoro
Ngoro

Level 3 Expert

1111 Answers

Nalin DSouza
Nalin DSouza

Level 2 Expert

224 Answers

Clive Gray

Level 3 Expert

1479 Answers

Are you a Motorola Mobility Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...