Question about Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

2 Answers

Kenmore model 665.15912001dishwasher

Problem, just stopped to work. Pushed the button to do a load of dishes and nothing happened. Nothing came on, no panel display lights---nothing. Checked the circut breaker, not tripped. Read a little on this so checked the power to the unit, was good. I took the fuse downtown and the guy said it was ok. Help, what next? Thank you. Mike.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Might seem like a dumb question but is it plugged into a GFI switch ?

Posted on Jun 25, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The controller board is burned out...common problem on this model. Only way to fix is to replace with a new one. Cost of part is about $130.

Posted on Jun 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My kenmore precision quiet guard dish washer won't start. The lights come on like normal but nothing happens. Please help


manual / mechanical fault on main switch......repair or replace...........might be pushed in too far!

Jan 09, 2015 | Kenmore Dishwashers

1 Answer

On my dish remote for tv 2 sat button stopped working and wont light up. all other buttons work. i have changed batteries but nothing changed. How do i fix this because i dont wan to waste money on an


Kevin rico,

I can definitely check this out with you. Does the SAT button light up when you press any buttons at all? If you press SAT, can you operate the receiver?

If neither of those work then the remote most likely needs to be replaced. If you would like to try that option, just send me an email at thomas.faust@dish.com and i'll assist you further!

Tommy Faust
DISH Social Media Representative

Jul 05, 2012 | DISH Network 142923 Remote Control

1 Answer

My machine is portable. Model: DP840SWPXO, Serial: FS1107915 It was washing a load of dishes. Set at "HEAVY/NORMAL & NO HEAT/DRY". It stopped working between the NORMAL and RINSE ONLY part of...


Hello & Welcome to FixYa

This can be reset by pressing two buttons in sequence 3-4 times, to reset your kenmore press these buttons in sequence:

High temp wash-heated dry-high temp wash-heated dry

You can clean the drain pump assembly if the problem returns. Please get back to me if you have any other questions.

Kevin

Feb 06, 2011 | Whirlpool Dishwashers

1 Answer

Light comes on but nothing happens


You need to replace the remote more than likely. Thanks for using Fix Ya.

Jan 29, 2010 | DISH Network 135899 Remote Control

1 Answer

Push start button but nothing happens but buzzing noise


Is Kenmore a Whirlpool?

  • Here is what happened.
  • Stopped running mid-cycle.
  • Dryer set idle for about two hours Then I pushed start butten again.
  • It ran fine to finish load.
  • Next load it was totall dead and silent and remains that way.
  • The vent hose was unobstructed.

May 04, 2009 | Whirlpool Dryers

1 Answer

Diswasher stopped working


There is a thermal fuse on the controller that commonly goes out. If you take apart the panel, and see the computer part, there is usually a part clipped on the side with 2 wires on it. When that goes out, it acts like there is no power to the unit. Very easy and in-exspensive to replace if that's it. It's pretty common on those. Good luck

Feb 15, 2009 | Dishwashers

1 Answer

Kenmore 600 Series gas dryer


trigger broken dryer will not turn on. I need a replacement. Where can I buy this part.

Nov 02, 2008 | Dryers

1 Answer

Diswasher stopped working


there is a fuse in the washer that needs to be replaced reply to me and will walk you through it

Dec 31, 2007 | KitchenAid 24 in. KUDI01FLSS Stainless...

Not finding what you are looking for?
Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher Logo

Related Topics:

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

D. E. Hev

Level 3 Expert

1164 Answers

Fred Sops

Level 2 Expert

271 Answers

Cindy Wells

Level 3 Expert

4918 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...