Question about Encon Industries Dryers

1 Answer

I have a ceiling mount Encon fan/light. While trouble shooting, I found that the motor capacitor had "opened", and the sides of which had blown outward. I want to get a new capacitor. The model is: #52-4E-7ALW-P3S.A second label on the motor housing is: "Listed Fan 408x-E64731-1" There is a Red wire which is a common ground for a Yellow ( 4 microfarad )wire and a Blue ( 2 microfarad )wire. The following are the dimensions, in inches( 1&1/8H x 1&1/2W x 3/4D. I just want to purchase a replacement capacitor. Can you help me? Respectfully, Bud Chorney Home phone: 203-787-0496 e-mail:

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 11,800 Answers

You don't need those particular models of capacitors, all capacitors with those characteristics (.2 and .4 microfarad at at least 200 volts) will do. You can find them at all hobby shops - just remove them and ask for a similar one.

Posted on Jul 04, 2010

  • Randall Cornelius Aug 25, 2012

    So if my capacitor is listed at 1.25 and 2.25 I will be safe or it will operate okay with a 1.2 and 2.3???



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Encon fan with two seperate switches. Switch works fan, but switch doesn't work light. I replaced wall switch, it didn't help.

Make sure the fan light wire is connected in the ceiling otherwise you might need a new pull chain for the light.

Nov 09, 2013 | Encon Industries 72200 PRESTON ES Ceiling...

1 Answer

I am looking for a capacitor for a Encon ceiling fan/light. It has 3 wires, one is a 1.25 the other is a 1.5. It is 250 volt AC50/60hz. The numbers on the very top first line are: CBB6-1. Everyone I have...

Eurton Electric Online Store: Capacitors

This site has a phone number.
They carry the capacitor you need or an equivalent.
They are fairly easy to install, but be careful, they retain high voltage when power is off.
Get instructions on how to make it safe to work on!


Sep 23, 2011 | Encon Industries (78018) Ceiling Fan

1 Answer

How do you fix the fan to a concrete ceiling?

Go to home depot and buy a pancake box in the electrical department its aprox. 3/4" thick and use concrete anchors or tapcons to mount it with.Hope this helps

Mar 08, 2011 | Encon Industries (78018) Ceiling Fan

1 Answer

My ceiling fan isnt working right

dont you have a three position pull switch on the unit like a three-way light bulb or if you have a remote controlled fan it should have it on the remote control

Sep 24, 2009 | Encon Industries (78018) Ceiling Fan

2 Answers

I need a celing mounting bracket for 52in 5 blade encon ceiling fan. where can i get one the model # is 94b03-0395

I just uninstalled my 29 year old Encon flush mount fan light. The number on the base is E101004. It was a lighted base. The mount bracket is built into the base. It is the 4 prong and hook style the allows the motor to hang suspended while wiring and then swings up. There is a glass ring that is sandwiched between the base plate and decorative bottom.
It's the only usable part besides the 4 glass light covers. You can save this from the land fill if you haven't purchased a replacement fan.

May 08, 2009 | Encon Industries 78716 Contempra Ceiling...

Not finding what you are looking for?
Dryers Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Encon Industries Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers


Level 3 Expert

76109 Answers

Brad Brown

Level 3 Expert

15633 Answers

Are you an Encon Industries Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides