Question about Cuisinart SPB-10 7-Speed Blender
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: burning smell
That burning smell was possibly the motor windings burning out. If the windings have burned the blender will need to be replaced. Hope this has helped you today,.......... Sea Breeze
Please let me know if this answered you question.
Posted on Feb 01, 2009
Switch must be bad, remove the four screws on the bottom they are under the feet, then check switches, and replace broken one.
Posted on Mar 26, 2009
We just had this problem. Called VitaMix and they talked about resetting the thermal protection switch inside. They suggested lifting the base down firmly, but gently, on the counter to help the internal switch reset. I did it while they were on the phone and, sure enough, the machine came back to life. Hope this helps.
Posted on May 07, 2009
SOURCE: I tried to blend large
It sounds as if the motor has burned out. You may need to purchase a new blender or send it to the manufacture for repair if it's still under warranty.
Posted on Jul 14, 2011
I will also check the blade bearings,if the blades does not turn easily and the motor brushes,they get worn with time and theybare esay to check and replace.
I wish you good luck and hope you saty away from buying the motor, thats a
very expensive ordeal.
Posted on Nov 17, 2011
Tips for a great answer:
Jan 04, 2018 | KitchenAid Blenders
Jan 29, 2015 | Breville Blenders
Jun 03, 2017 | Philips HR1350 SingleSpeed Handheld...
Aug 03, 2009 | Black & Decker Blenders
Jun 23, 2009 | Kenmore 204101 Single-Speed Blender
Jun 18, 2009 | Vitamix 5000 Work Top Blender
Feb 01, 2009 | Hamilton Beach 52250 BlendMaster Ultra...
Nov 19, 2008 | Vitamix 5000 Work Top Blender
331 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: