Question about Bosch 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
How do we do this? there is no spin button and having to restart the entire cycle is awful. thanks.
Had a repair man here for the same issue. Learned two things:
1. Too much detergent causes 'soap lock.' The electronics will get confused when there's too many suds left after a rinse and shut the spin cycle down. That's why re-running the entire cycle without more detergent solves the problem. Use less detergent.
2. There is a way to manually get the spin cycle to run using diagnostics codes. Here's what my guy did:
a. Washer selection knob in OFF position.
b. Hold the 'Spin Selection' and 'Delay Start' buttons down at the same time.
c. While holding those two buttons, turn the Washing selector knob to Permanent Press-Cold.
d. Keep the buttons held down until the LCD control panel reads 'P:01'
d. Release buttons.
e. Use the 'Spin Selection' button to cycle thru the codes. Stop when it reads 'P:04' which is the spin cycle.
f. Press 'Start/Pause' button to begin the spin cycle.
I don't know what the other codes do but this should save you from having to run the entire wash cycle.
Hope that helps! Tim
Posted on Aug 26, 2008
Tips for a great answer:
Oct 24, 2013 | Bosch Nexxt 500 WFMC3301 Front Load Washer
Nov 01, 2010 | Bosch Washing Machines
Oct 17, 2010 | Bosch Axxis WFL 2060 Front Load Washer
Jun 03, 2009 | Maytag Legacy Series Top Load Washer
May 24, 2009 | Maytag Legacy Series Top Load Washer
Dec 22, 2008 | Bosch Classixx WFC 2465 Front Load Washer
Apr 13, 2008 | Bosch Washing Machines
Dec 30, 2007 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...
Dec 18, 2007 | Bosch WFMC2100UC Nexxt Essence Washer
Feb 11, 2016 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...
Jun 05, 2014 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...
3,877 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: