Question about MPC Computers ClientPro 125D PC Desktop

Open Question

I'm trying to connect my mpc Clientpro to the internet using my dsl modem. When I plug in the modem and try to load the internet it won't happen. I diagnose the connection problem and it says to call the internet provider. I called them and they told me there is a network card blocking the connection. This computer was given to me by an office I worked at and it was on a network there. I know my modem is working as I have no problem with it on my other computer. Can you help?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 81 Answers

SOURCE: cant get the sound card to work

The best way to get it working is to find out the manufacturer of the sound card and go to their website to download the driver.

Posted on Jun 30, 2009

  • 44 Answers

SOURCE: Get My Drivers

Hi,
The company that built the ClientPro 414 for MPC sold it to several other companies. It is also known as the Mecer Multimedia PC L19IA.

Here are the XP drivers directly from Mecer:
http://downloadcenter.mustek.co.za/list.php?dir=Repository%2FMultimedia+PC%2FL19IA%2FXP%2F

Posted on Jul 01, 2009

  • 1 Answer

SOURCE: I recently had to reformat

Here's what I did.
I went to the Mustek site posted above and downloaded all the drivers to a usb drive.
Mustek's page lists a separate zipped folder for each category of driver needed by XP .

Download all of them to the usb drive and go from there.Incredible assortment of XP drivers.

Sandy

Posted on Jul 06, 2009

  • 106 Answers

SOURCE: I NEED A SERVICE/OWNER MANUAL FOR A MPC CLIENTPRO

Try following link, looks executive file but after installation it puts up a shortcut to manual on desktop

http://www.mpcdrivers.com/sylvia/Support/Desktop/MANUALS/EMA/EMA001054-01%20Install.EXE

Also, can download from
http://www.mpcdrivers.com/apps/compdet1658.html?ID=11342

Hope this helps..!

Posted on May 20, 2010

tech4allmen
  • 666 Answers

SOURCE: MPC Computers ClientPro 365 PC Desktop ethernet

Hi,

Sorry to hear about what happened to your computer. Anyhow, please go to this link http://www.mpcdrivers.com/apps/compdriv2b2f.html?ID=16.

This is where you can get all drivers for your computer. Thank you for visiting FixYa! rating and comment for this assistance will be greatly appreciated.

Posted on May 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can not connect to the Internet. I have WiFi connection but can't do anything else


Plug your computer/laptop directly into router. Can you get to the Internet then?
If you CANNOT get to the internet when your computer is plugged into the router, reboot your router. If it doesn't have a power switch, unplug it. Leave it unplugged. Next, you need to figure out if you have another modem for DSL or Cable. If you do have another DSL or Cable modem, unplug that device to. After 5 minutes has elapsed for both devices being unpowered, plug in the DSL or Cable modem to the power source. Keep the router unplugged from power. After your DSL or Cable modem has powered up for 5 minutes, plug your router into the power source. Wait a few minutes. Reboot your computer/laptop. Try the wireless connection again.
If you CAN get to the internet when your computer is plugged into the router. Reboot your computer. Try to connect again. If you cannot connect after rebooting, make sure you are connecting to YOUR OWN wireless access point and not someone else's.
Do you have other computers/laptops/wifi devices that CAN/CANNOT connect to your wireless / access the Internet?

Jul 03, 2011 | Computers & Internet

1 Answer

Cannot connect to my Internet. On my 2Wire modem at home, The Power LED light is solid green, the Ethernet LED light is green, the DSL LED light is continually flashing, and there is NO Internet LED...


With the DSL light always flashing, it means that either the ADSL signal (synchronization) does not reach your modem, or your modem cannot 'read' the signal.

You need to determine if the problem is from one of the following places :
  • outside of your house (your land line or ISP equipment) or from the modem;
  • your telephone-cable inside your house or
  • one of your equipment;


Try the following manipulations to determine from where the default comes :

  1. Determine if the problem is in your house or on the land line
    • Unplug each and every equipment which is connected to your telephonic installation (Fax, phones, answering machines etc);
    • Using the shortest telephone cable (RJ11) you possess, plug only your modem to the main telephone jack of your house.
    • If the DSL LED still flashes continuously, the problem is somewhere between your ISP's equipment and your house. You should call them and expose the situation. At this stage, you can't do much else.

  2. Determine if the problem is in your house installation
    If the DSL LED lights up when it is plugged to the main telephone jack, then it is either one of your equipment which is at fault, or the house installation. To pinpoint the problem, do the following :
    • With all the other equipment still unplugged, try the modem on all the other telephone jacks you have around the house.
    • If the DSL flashes continuously on one of the jacks, you will have found the source of your miseries. Depending on your ISP's terms and conditions, you will either have to call them of call for the services of a third-party technician to solve the problem.
    • If the DSL lights up correctly on all the telephone jacks, then your house telephone installation is good. Proceed to the next series of tests.

  3. Determine which equipment is at fault
    • Plus your modem to one telephone jack and wait for the DSL line to light solid.
    • Use a splitter (ADSL filter) to plug the equipments you possess (telephone, fax etc) one by one. Verify each time if the DSL LED is still lit or flashes continuously.
    • If one of the equipment causes the DSL LED to flash, it is that equipment which causes your problem.
    • If every equipment causes the DSL LED to flash, the it is the splitter (ADSL filter) which is causing the problem. You can confirm this hypothesis by testing each and every ADSL filter you have in your possession.
    • Replace any faulty equipment and you should have eliminated the problem.
If nothing of this solves your problem, you won't have any choice but call you ISP. Don't hesitate to tell them all tests you will have done.

May I also make some recommendations :
  1. Use a power surge protector (not a UPS though) to plug your modem to the electric outlet BUT plug it directly to the telephone jack;
  2. Make sure your modem is plugged in as far as possible from UPS, television, etc.;
  3. If possible, don't plug the modem in the same electric outlet as other equipments;
  4. Don't use any telephone extension cable to plug your modem to the telephone jack.

Hope this helps you. Let me know what happens next.

May 11, 2011 | 2wire (1000-000057-000) Modem

1 Answer

Followed all the set up steps but my DSL light would not stay on


  • 1 Plug the Ethernet cable into the Internet port on your wall. If you do not have Internet ports installed in your home, connect a phone line adapter to a phone line jack. The adapter makes the phone line wider so Ethernet cables can connect to it. This does not block your phone from use.
  • 2 Plug the other end of the Ethernet cable into the Internet port on the back side of the Netgear DSL modem.
  • 3 Connect the Netgear DSL modem to a local power source. The power plug inserts into the modem via a small port on the rear of the modem.
  • 4 Insert a second Ethernet cable into one of the numbered ports on the back of the modem. Run the cable to your computer and plug it into the Ethernet port on the computer.
  • 5 Look on the back end of the DSL modem for an HTTP: address. Type this into your Internet browser's search bar. The Netgear DSL modem menu appears on the screen.
  • 6 Select how many computers are to use the modem, if you are using it with other DSL modems and set up a password (the default username and password is "admin"). Click "OK" to initiate the changes you made to the menu. You can now use your Netgear DSL modem to connect to the Internet.


  • Read more: How to Install a Netgear DSL Modem ' eHow.com http://www.ehow.com/how_5886784_install-netgear-dsl-modem.html#ixzz10lH4dl2y

    Sep 27, 2010 | NetGear DGN2000 Wireless Router

    2 Answers

    Will my modem help me connect to internet on my dsi because i have one and i would like to know if i can connect to the internet on my dsi with it


    That depends mainly on your modem. If you plug a DSL from the you DSL on the wall to your modem (which, hopefully, is able to use DSL, not Cable), then you can connect it to your computer (which should usually be using Ethernet).

    Mar 07, 2010 | Computers & Internet

    2 Answers

    MPC All in one Clientpro. Motorola Modem detected but not working


    Go to "codec all in 1" on the net. Install these files and you should be on your way. This happens with Window Media Player and Divx Player.
    good Luck

    Jun 17, 2009 | MPC Computers ClientPro 414 All-In-One PC...

    1 Answer

    I can't get on the internet


    >> do i have to call my internet service provider to activate my modem?

    Yes.

    Each modem has a unique "address", and your I.S.P. uses that address to authorize each DSL-modem that tries to connect to their network.

    Or, if the two of you live in the same house/apartment, you should just buy a "router". Then, both computers can connect to the router, and the router connects to the DSL modem, and both of you can "share" the monthly fee for the _one_ Internet connection.


    May 27, 2009 | AT&T High Speed DSL Modem

    1 Answer

    DSL line disconnects on WRT54GS only


    Try to change the LAN IP address of your router to 192.168.2.1 by accessing the router's Setup page. You also need to set your Westell modem to "full-bridge mode". You need to ask assistance from your ISP to bridge the modem. After that, set-up the Linksys router to PPPoE then power cycle it.

    Apr 15, 2009 | Linksys Wireless-G WRT54G Router

    1 Answer

    New computer running slow


    if you are using dial up, you shud not have a modem.. modem is just for DSL connection
    if you have a modem probably you are using a DSL connection

    DEFINITION:
    dial up - connection using a phone line with internet connection; cannot use fone while on internet

    DSL/modem- connection using a modem plugged in with computer and fone line; able to use fone even when on internet.

    Jul 10, 2008 | Siemens SpeedStream Modem (4100) (SS4100)

    1 Answer

    Wireless router


    Yes, you can use wireless router with the modem. I guess the actiontech DSl router that you have is also Wireless one. If so, you can use just the DSL router for wireless connection. If you really want to use Dlink router with it, Connect the ( WAN port ) of the Dlink router to the ( LAN Port ) of the Action tech modem [ modem(LAN)-->Dlink(WAN) ]. Once you do this connection, better to do power cycle ( unplug the pwr to the dlink first, then, disconnect the pwr to action tech - wait 1min and plug the pwr to modem, wait for DSL light to be solid , then put the pwr back to dlink ). Make sure DSL light on the modem solid, internet light & WLAN light on the link glowing.
    - Make Hardwire connection between the computer to Dlink and check the ip address on the computer whether it acquires the ip address from Dlink and then check the internet connection on the computer, it has to work. if computer not getting ip from dlink, try restarting computer.
    - If hardwire connection on the dlink works fine and check the wireless connection.

    For wireless configuration or assistance you may check this link:

    http://www.portforward.com/help/wirelessxp.htm


    please feel free to ask, if you have any more assistance.

    - Laxman

    Nov 22, 2007 | Actiontec (GS204AD9-02) Router...

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    61 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top MPC Computers Computers & Internet Experts

    Lee Durbin
    Lee Durbin

    Level 3 Expert

    408 Answers

    Bee Santiago

    Level 2 Expert

    268 Answers

    rey francis basa
    rey francis basa

    Level 3 Expert

    666 Answers

    Are you a MPC Computers Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...