Question about Radio Shack Pro-96 Scanner

1 Answer

Error message when trying to enter frequency codes into the Radio Shack Pro-433... How do I enter the frequency codes I have into this scanner?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,761 Answers

The error message almost always means that you have either entered a frequency that's out of your scanner's tuning range, or that you've neglected to enter a decimal point in the frequency. Check your operating manual to verify that the frequencies you're programming are within the unit's tuning range. If you don't already have the manual, you can download/print it here:

http://rsk.imageg.net/graphics/uc/rsk/Support/ProductManuals/2000433_PM_EN.pdf

You can also find a wealth of useful scanning information, including a database of active frequencies in your area, by visiting:

www.RadioReference.com

Bill B

Posted on Jul 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How come my pro-84 scanner wouldn't hold the mrn frequency last weekend in richmond. Kept getting an error message. pressed hold, entered the station 454.000 and then hold again and kept getting error...


454.000 is not a station, but a frequency. it is 454 Mhz. or 454.000 Khz.
If no station is transmitting on that frequency, the scanner only will produce a hiss. Check the manual, to see how you can put in a frequency, just to monitor. Put the sq, so you just don't hear the noise and wait till any transmitter will use that frequency.

May 06, 2014 | Radio Shack Pro-84 Handheld Scanner

2 Answers

Codes for a radio shack pro 404 scanner


Codes? If it's frequencies that you're looking for, you can find a comprehensive database, and a lot of other useful scanning information, by visiting:
www.RadioReference.com

Bill B.
Listening in since the 60's

Dec 30, 2010 | Radio Shack Pro-97 Handheld Scanner

1 Answer

How to program local frequencies? Radio Shack PRO-84


Press the HOLD key, then enter the number where you want to store the frequency, then press FUNC + PGM, the channel number comes up, use the number keys and ./CLR to enter the frequency, including the decimal point you want to store, press E to enter the frequency into the channel ...You can get your frequency's at www.RadioReference.com ...hope this was helpful..

May 26, 2010 | Radio Shack Pro-84 Handheld Scanner

1 Answer

I am trying to program radio shack pro 97 police scanner need live help


nothing to it. press program, enter frequency, press enter, press program to repeat next frequency.

Thanks,
dodgem250.com

Apr 09, 2010 | Radio Shack Pro-97 Handheld Scanner

1 Answer

I get an error when I try and enter certain freq. Any idea why?


you have to push the program button before you put the frequency in and then press enter

Aug 21, 2008 | Radio Shack Pro-82 Scanner

1 Answer

Radio Shack Pro-433


Here's a link to the manual for the PRO-433. IT has all information you will need to operate the scanner.

http://rsk.imageg.net/graphics/uc/rsk/Support/ProductManuals/2000433_PM_EN.pdf

Jul 26, 2008 | Radio Shack Pro-2052 Scanner

1 Answer

Scanner


A programming ERROR message frequently means that either you have neglected to enter a decimal point in the frequency OR that you have attempted to enter a frequency that is out of range for the scanner. It could, of course, mean several other things, especially with a trunking scanner. Here is a link to the owners manual for this scanner:
http://support.radioshack.com/support_electronics/doc61/61172.pdf

Bill B.
San Antonio

Jul 16, 2008 | Radio Shack Pro-94 Scanner

2 Answers

Programming channels


Hello ... IF YOU HAVE A COMPUTER YOU CAN MAKE PROGREMING, DETETINMG AND TRUNKING A BREEZE. IF NOT I FOUND THAT ALL FIRE AND POLICE TRUNKING ACTIVITIES ARE BETWEEN 840.0000 through 900.0000. WHEN YOU WANT TO SAVE A CHANEL TURN OFF RADIO AND TURN BACK ON SELECT THE DESIRED CHANNEL YOU WANT. THEN PRESS "PGM" AND ENTER YOUR FREQERNCY... PRESS ENTER AND IF YOU WANT TO ADD ANOTHER CAHANNEL ... HIT "PGM" AGAIN AND FREQ. AND ENTER. YOU CAN KEEP DOING THIS TILL YOUR DONE GROGRAMING .. THEN JUST HIT SCAN AND IT WILL SCAN ALL THE FREQ.S YOU HAVE ENTERED. HERE IS A SOFTWARE PROGRAM THAT CAN LOOK UP ALL FRQ ANYWHERE IN THE US AND WITHE A PLUGIN DOWN LOAD ALL THE CHANNELS. BuTel software home page ARC-433 software for Radioshack PRO-433 / PRO-528 / PRO-2051 'ARC433 is now available!' -------------------------------------------------------------------------------- ARC433 (US$ 29.95) is dedicated software for the RadioShack PRO433, PRO528 and PRO-2051 and is the most versatile software available for the Radio-shack PRO-433 / PRO-528 / PRo-2051. Screenshot from our memory editor: the most versatile memory editor available on the market: -------------------------------------------------------------------------------- Overview of options in ARC433: Order ARC433 now online using PayPal/credit card or call Santa at 1-800-SCANNER ARC433 supports the Radioshack PRO433, PRO528 and PRO2051 models in one single software package. ARC433 includes THE most versatile memory editor available on the market. Radioreference.com import option for conventional and trunk systems! Programming your scanner was never this easy! Enhanced CSV file import and 'mapper' Paste Frequencies DIRECTLY from any website using 'Paste Special' Setup channels in an easy, spreadsheet type interface. User Manual (45 pages, PDF file) Store Unlimited number of configurations on your harddisk. Copy/Move/Swap memory banks / memory channels Compatible with Windows 2000 / XP. All updates are free for registered users Easy cut/copy/paste data between channels and banks. Move channels up and down with quick move buttons Export CSV data Fill down/series option Full clipboard support for import/export data to/from other applications Easy data toggle with mouse double click or space bar or keyboard shortcuts Sort frequencies per bank Remove duplicate frequencies Easy Fill for setting up new banks in a few seconds (enter a start frequency and a step, and easyfill will calculate and fill the selected bank) Extra Dummy bank for storing temporary data while you are re-organizing your scanner channels. Print option System Requirements: Windows XP/2000/Vista PC interface cable 20-047 for USB or PC interface cable 20-289 for serial port Use other cables at your own risk! Use the ARC433 demo version to verify communication works before purchasing the software! All software sales are final. Order ARC433 for PRO 433 / 528 now online using PayPal or a credit card or call 1-800-SCANNER. -------------------------------------------------------------------------------- Screenshots:

Apr 16, 2007 | Radio Shack Pro-95 Handheld Scanner

Not finding what you are looking for?
Radio Shack Pro-96 Scanner Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Shack Radio Communications Experts

Jason

Level 2 Expert

211 Answers

john milligan

Level 3 Expert

514 Answers

Steve

Level 3 Expert

3289 Answers

Are you a Radio Shack Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...