Question about LG RU-52SZ51D 52" Rear Projection HDTV-Ready Television
If your TV is making snapping or crackling electrical noises, I strongly advise you to unplug it and take it in for service or replace it. The power supplies in televisions bump voltages up into the 400-450+ range and they are no joke; they cause fires believe you me.
I hope that helps.
Posted on Jul 04, 2010
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 14, 2015 | Toshiba REGZA 52RV530U LCD TV
The front panel Status LED provides an indication of
the set's operation and the possible cause of a malfunction.
If an abnormal condition is indicated, perform the
Self Diagnostics procedure.
To activate, press the front panel <ACTIVITY> &<CH
??> buttons at the same time and hold for 5 seconds.
The STATUS LED will then flash denoting a two digit
• The number of flashes indicates the value of the
MSD (tens digit) of the Error Code.
• The flashing then pauses for approximately 1/2
• The LED then flashes indicating the value of the
(ones digit) of the Error Code.
• The Error Code is repeated a total of 5 times.
Example: If the Error Code is "23", the LED
will flash two times, pause, and then flash three
Table 2-2: LED Indications
Error Codes, descriiptions and the most likely cause of
the error are listed in Table 2-3.
Note: The TV must be in "Shut Down." The LED
will probably be indicating an abnormal
condition. If the TV is switched Off, AC is
removed, or a System Reset is performed, the
code automatically resets to "12" No Error.
See the Error Code Log to retrieve a history of
Note: Use the front panel buttons, not the remote
Note: If there is no response, the front panel may be
locked by a V-Chip setting. To unlock, press
and hold <ACTIVITY> on the front panel for
LED Indication Condition
Off Off (standby)
Green Power On
Slow Blink Green Power Off with Timer Set
Fast Blink Green (80 seconds) > Off Power Off (Cooling fan still working, 80 sec)
LED Indication Condition
Red Lamp Failure
Yellow TV Too Hot
Slow Blink Red TV May Require Service
Slow Blink Yellow Lamp Door Open or No Lamp Installed
ABNORMAL INDICATIONS (For details perform Self Diagnostics Procedure.)
Jul 07, 2014 | Mitsubishi WD 65837 65 in. HDTV
Jan 20, 2014 | Televison & Video
Aug 21, 2017 | Sharp LC-32SB23U 32 in. LCD TV
Mar 02, 2012 | Panasonic VIERA TH-42PX60U 42 in. Plasma...
Sep 10, 2017 | Panasonic TCP50C2 50 in. TV
Nov 06, 2010 | Televison & Video
Dec 01, 2009 | Mitsubishi WD-62525 62" Rear Projection...
86 people viewed this question
Usually answered in minutes!