Question about Car Audio & Video

Open Question

I have a necvox fd-2680 6.8 color lcd. i need the power cord and av jacks. where can i go or who can i talk to about getting them

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need assistance with a new Kenwood stereo DDX4038BT The Av jacks at the rear do they go to the amp and then from the amp to the speakers The amp i have is a ZX400.1

Yes, they should be labeled for each speaker. Nice radio, please install the fuse (on the power cable under the hood) LAST as to not accidently damage anything.

Aug 18, 2011 | Kenwood Car Audio & Video

1 Answer

How do i turn on my necvox re 7680 dvd screen

Hi, Just bought a car with drop down Necvox re-7680 connected to ad 6865 and vhs player, can you tell me where the lead from the video out on the 6865 should go please?

Jul 24, 2011 | Car Audio & Video

1 Answer

What color are hotwire and ground and accessory

If your talking about for a receiver, its usually RED - constant power, YELLOW - accessory, and Black - ground.

If your talking about an amplifier, its RED - power, BLACK - ground, and BLUE - remote or accessory

Jun 03, 2011 | Car Audio & Video

1 Answer

Need av cable from one monitor to the other

Regards, Tony

May 23, 2011 | Car Audio & Video

1 Answer

I have a Necvox 5.5 inch monitor,(Model #M5000 TFT Color monitor. Some moisture got into the interface. The moniter will come on but I get no picture. Most likely I will have to replace the interface,...

I have a Necvox 5.5 inch monitor,(Model #M5500 TFT Color monitor.I WANT THIS MODEL DISPLAY PANEL MODULE WHERE AVAILABLE, ANY ONE HELP ME MY E MAIL ID -, mobile-0091 9495628225

May 19, 2011 | Car Audio & Video

1 Answer

I have to wrap the power cord around the dvd in order 4 it to work and it still doesnt charge stay charge long it last not even 30 minutes is it my motherboard or is it the power cord

What are you talking about exactly? I do not get the question.
Are you talking about a DVD connected to a desktop and the power provided by the cable from the POWER SUPPLY?

God Bless You.

I will be awaiting your reply, to help you out.

Feb 21, 2011 | Car Audio & Video

1 Answer

My problem is about wiring, there so many color wire at the back red acc,blue autoantenna,how about the 2yellow,blkyellow,pink,green,whiteviolet and 3blk i hope you help me about this preblem thank you.

Ok without you giving any detail as to what kind of car and the make and model or year im just going to try to give a general explanation.

Common wiring colors and what they do -
Black- is always the ground wire. Always. This must either be connected to another ground wire or connected to metal, for the device to work.

Red - Red is always the power cord, always. This must be connected either to another red power cord or straight to the vehicle battery.

Im not sure what your referring too with "acc"

blue - antenna, this sends a signal telling the radio to shut off when the car shuts off, otherwise the radio would stay on all the time.

Yellow/pink/green/violet - are probably all specific speakers inside your vehicle and respond according to colors on the back of whatever you are trying to install.

**special note, there are tons and tons of different combination's of the colors and wires throughout the various automobiles in the world, it is easiest to check your manufactures website or handbook or manual to find out your vehicles wiring guides and colors.

Hope this helped.

Feb 07, 2011 | Car Audio & Video

1 Answer

I have an older car sterio by sony it has rca jacks that say front and rear is tis my speaker wires? if so how do i hook them up to my speaker wires?

RCA jacks are used for outputs to an amp.
The speaker output wires will normally be a color per channel, the "A" leg will be the color and the "B" leg the same color with another colored stripe running along its length.
As for power supply the yellow would be for memory and needs to be connected to a permanent power supply ie direct to the battery.
The red is for main power. Connecting it to the ignition will switch the radio off when the ignition is turned off, or connecting it direct to the battery will allow operation of the unit irrespective of the ignition switch position.
The blue is used to power additional accessories such as an antenna or amplifier. If you are going to operate an electric antenna through the unit it is best to use a relay.
Black is to be connected to battery negative or any good earthing point on the vehicle body. For further assistance please leave a comment. A model number of the stereo would also help if you need more in depth assistance

Dec 14, 2010 | Car Audio & Video

1 Answer

Decode Colors of Clarion RAX 341D harness.

well i think your talking about a car cd player most of them are all the same so

red is power when the key is on
yellow is Constant power
black is ground
blue is your remote wire - for amp or power ant
green and the green - black is your left rear speaker
purple and purple - black is right rear speaker
white and white - black is your left frount speaker
gray and gray - black is your right frount speaker

so on the speaker wires with the black runing down them is alway the neg and the solid color is pos

Mar 10, 2010 | Clarion Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4748 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

66126 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides