Question about Washing Machines

1 Answer

No insturctions on how to operate it - Washing Machines

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,294 Answers

Click on 'washing machines' (below FIXYA) on this website, type in your model number & search. You will get a shortlist; click on your model, below the page u will get Manual/Guides. Click on the blue, u hv your manual on line. If available that is.........

Posted on Apr 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CDM-11 WATER SOFTENER PROBLEM


what is the make of your machine and full model number i cant seem to find cdm-11

Dec 06, 2011 | Washing Machines

1 Answer

When I wash clothes it keeps beeping and has a flashing F H... what does this mean?


It means that the machine doesn't detect enough water entering or your pressure switch could be going bad.

Potential Causes

If there is no water in the unit: • Make sure that both valves at the water source(s) are turned on all the way. • Check for plugged or kinked inlet hoses or plugged screens in the inlet valves • Verify inlet valve operation

If there is water in the unit: • Verify Drain pump operation • Pressure Switch Hose is in good condition and properly connected to Tub and

Pressure switch • Verify there is not a siphon problem • Verify wire harness connections to; Inlet Valves, Pressure Switch, Drain Pump,

Flow Meter, and Central Control Unit (CCU) • Check all hoses for possible leaks • Verify pressure switch operation • Verify flow meter operation • Verify CCU operation

Feb 03, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

The awm8103 not working it writing FH .what its mean?


I have not seen this but from the online fault code listing says that these are the conditions for the failure:

No water detected entering machine or Pressure switch trip not detected.

If after 30 seconds the control does not detect water entering machine and then valves will be turned off and the error code will be displayed.

Or

If the control has turned the water valves on and after 8 minutes the flow meter has detected 10.5 gallons of water passing through it, but has not detected the pressure switch trip, the valves will be turned off and the error code will flash.

And the things to check are:

Press PAUSE/CANCEL twice to clear the display.
If there is no water in the unit:
Make sure that both valves at the water source(s) are turned on all the way.
Check for plugged or kinked inlet hoses or plugged screens in the inlet valves
Check inlet valve operation
If there is water in the unit:
Check Drain pump operation
Pressure Switch Hose is in good condition and properly connected to Tub and Pressure switch
Check there is not a siphon problem
Check wire harness connections to:Inlet Valves, Pressure Switch, Drain Pump, Flow Meter, and Central Control Unit (CCU)
Check all hoses for possible leaks
Check pressure switch operation
Check flow meter operation
Check CCU operation

• If there is water in the unit:
- Verify Drain pump operation
- Pressure Switch Hose is in good condition and properly connected to Tub and Pressure switch

• Verify there is not a siphon problem
• Verify wire harness connections to; Inlet Valves, Pressure Switch, Drain Pump, Flow Meter, and Central Control Unit (CCU)
• Check all hoses for possible leaks
• Verify pressure switch operation
• Verify flow meter operation
• Verify CCU operation

Replace failed component.

Read more: http://www.appliancepartspros.com/repairtips/repairtips_appliance+fault+codes.aspx#ixzz0ufpGdihe
http://www.appliancepartspros.com hope this helps

Jul 25, 2010 | Whirlpool AWM8103/1 Front Load Washer

1 Answer

Error code FH during wash cycle.


Hello,If there is water in the unit:
1. Check the drain pump operation
2. Pressure switch hose is in good condition and properly connected to
*Tub and pressure switch
*check there is not a siphon problem
*check wire harness connection to inlet valves,pressure switch,drain pump,flow
*Meter, and central control unit(CCU)
*check all hose for possible leaks
*check pressure switch operation
*check flow meter operation
*check CCU operation
Thanks


May 31, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Our front loader model LTF6000ESO, which is registered with frigidaire, did not come with an operating manual. Only a parts list and a Use and Care booklet. The problem is our 1 1/2 year old locked the...


HI. To unlock the controls,press Options and Select at the same time and hold 10 seconds until ”LOC” is no longer displayed. You can access the Operations manual and other literature, by clicking the links below.

Click For Your Complete Owners Manual.

Click For Your Operations Manual

Dec 27, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

FLASHING HF CODE WILL NOT WASH OR UNLOCK


Press PAUSE/CANCEL twice to clear the display.
If there is no water in the unit:
1. Make sure that both valves at the water source(s) are turned on all the way.
2. Check for plugged or kinked inlet hoses or plugged screens in the inlet valves
3. Verify inlet valve operation
If there is water in the unit:
1. Verify Drain pump operation
2. Pressure Switch Hose is in good condition and properly connected to Tub and Pressure switch

* Verify there is not a siphon problem
* Verify wire harness connections to:Inlet Valves, Pressure Switch, Drain Pump, Flow Meter, and Central Control Unit (CCU)
* Check all hoses for possible leaks
* Verify pressure switch operation
* Verify flow meter operation
* Verify CCU operation

Sep 02, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool ghw9150pwo code f h


Press PAUSE/CANCEL twice to clear the display.
If there is no water in the unit:
1. Make sure that both valves at the water source(s) are turned on all
the way.
2. Check for plugged or kinked inlet hoses or plugged screens in the
inlet valves
3. Verify inlet valve operation
If there is water in the unit:
1. Verify Drain pump operation
2. Pressure Switch Hose is in good condition and properly connected to
Tub and Pressure switch
Verify there is not a siphon problem
Verify wire harness connections to:Inlet Valves, Pressure Switch, Drain
Pump, Flow Meter, and Central Control Unit (CCU)
Check all hoses for possible leaks
Verify pressure switch operation

Verify flow meter operation
Verify CCU operation

Don't get too deep into the washer itself and void your warranty! 

Jun 09, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a indesit w128x and have lost the insturction manual


Head over to the manufacturer's website.

Typically they have a SUPPORT section - where you enter the FULL model number, and then can download a FREE manual.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 10, 2009 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...