Question about Indesit Kitchen Ranges

Open Question

The symbols on my Indesit oven have literally wiped off while being cleaned (the oven is only two years old). The temperature numbers have also worn off making it guesswork to get the temperature correct. It is FORNO FIE36K.B IX GB. Thanks

Posted by on

5 Suggested Answers

  • 1113 Answers

SOURCE: Indesit oven markings have been wiped off

Your model number can usually be found on a white or silver rating plate located somewhere on the product, usually the base, rear. Instruction books can be downloaded from the following link:

Posted on Jul 28, 2007

  • 1462 Answers

SOURCE: Grill element was corroded and

did you reset the clock after you switched on - i suspect you have it on automatic

Posted on Sep 18, 2008

  • 1 Answer

SOURCE: Jenn-Air S136 Grill-Range--auto clean not working

Selector to Clean
Temperature to Clean
Move lock lever to the right
Press the enter button Twice

Posted on Nov 27, 2009

  • 725 Answers

SOURCE: Oven takes up to 45 minutes to reach temperature

We provide free diagnostic information when you tell us what brand and model number you are having issues with.
We are available from 7 AM – 7 PM CST. We also provide part removal/installation instructions for our customers when parts are purchased through us.
It is our goal to get you back up and running again ASAP, so please contact us when you need us to help you.
We look forward to hearing you and hope that you have a terrific day. Thank you, Ella

Posted on Mar 11, 2010

  • 33 Answers

SOURCE: I have a Whirlpool SF368LEPS1 Accubake gas oven

the temp.control sencor is out

Posted on Nov 11, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Should this oven leak water/fluid from bottom of door when cooking. It is only 5 months old.

you should have an aluminum foil or silicone pan in the bottom of your oven for drippings. These are cheap and throw away and also make oven cleaning easier.

Mar 03, 2015 | Indesit Kitchen Ranges

1 Answer

Kenmore range stopped working after self clean cycle

It will help to know the model number from the oven, but F2 usually indicates a failed temperature sensor on most ovens. If this is the case on yours, it will have to be replaced for the oven to operate again.
Post back with the number and I will see if I can help.Thanks/Mike

Dec 24, 2007 | Kitchen Ranges

1 Answer

Oven overheating / temp control wonky

Please double check that model number. That number is coming up as a refrigerator.

Feb 09, 2013 | Kitchen Ranges

2 Answers

How long should I run the self cleaning on a HotPoint self cleaning oven. Its about 30 years old.

STOP... Please don't use that function on a stove that is this old. Is what I would like to say.... but I don't want to be an alarmist..
You see what the invoking of the "Self Clean" function does, is that it interlocks the doors, and heats the internal temperature up to an incredibly high temperature, far and above usual usage, this is to literally burn off anything.
Now what's wrong with that?. well usually even in the older modern ovens the Thermostat and or Thermistor and or the Door Interlocks, often fail, then or shortly thereafter rendering the stove up for a fix.
In a stove 30 years old, i would imagine all of those would eventuate? (Tongue in cheek) If the stove is in good condition, one should be Ok.
So if it were me, I dunno if I would risk it?. In saying this all, I guess the repairs that may have to be done, are NOT that major, nor too expensive, and IF these parts fail, then I guess they would maybe fail sooner or later anyway, but I know for a fact that the doing of this self clean, can be thwart with disaster.
I feel it is my duty to warn you of this eventuality, so that if you do proceed, then you are forearmed with the knowledge.
As for, the answer to the question, how long should one "Run" the self clean for. Well this is usually determined by the unit itself, you will know when it has finished, when, the door interlocks release and you are able to open the door. This can be up to 6 - 8 - 12 HOURS later in some case, (You would have to check your manual) I guess it takes quite a while to cool down from around 900 degrees!

Sep 22, 2010 | Hotpoint RB757 Electric Kitchen Range

1 Answer

Roper continuous cleaning oven instructions

If it is continuous clean, it cleans itself constantly. Just wait til it cools and wipe up the mess! Love these ovens!

Mar 02, 2010 | Kitchen Ranges

1 Answer

How do I set the oven to self clean

The oven door must be closed and all controls set correctly for the cycle to work properly. After a Clean Cycle You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools. If white spots remain, remove them with a soap- filled scouring pad and rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle. If the oven is not clean after one clean cycle, repeat the cycle.
You cannot set the oven for cooking until
the oven is cool enough for the door to unlock.
While the oven is self-cleaning, you can
touch the TIMER/CLOCK pad to display the time of day.
To return to the clean
countdown, touch the COOKING TIME pad.
If the shelves become hard to slide,
apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.

Using the self-cleaning oven.

How to Delay the Start of Cleaning

Make sure the clock shows the correct time of day. If your model has a latch, latch the door. Touch the SELF CLEAN pad. Using the + or or the number pads, enter the desired clean time. Touch the DELAY START pad. The earliest start time you can set will appear in the display. Using the + or or the number pads, enter the time of day you want the clean cycle to start. Touch the START pad. On models without a door latch, the door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off. The oven shuts off automatically when the clean cycle is complete. When the LOCKED DOOR light is off, slide the latch handle to the left as far as it will go and open the door. If your range does not have a latch, the door will unlock automatically. n The words LOCK DOOR will flash and the oven control will signal if you set the clean cycle and forget to close the oven door or forget to latch the door on models with a latch. n To stop a clean cycle, touch the CLEAR/OFF pad. When the LOCKED DOOR light goes off indicating the oven has cooled below the locking temperature, unlatch the door (on models with a latch) and open the door.

Oct 17, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

I can't get it to self clean. Can I use easy off?

Your part number is 9751439 approx. cost $118.00.
Self cleaning ranges can be cleaned with any oven cleaning product. Most repair technicians do not recommend using the self clean feature.
Too many repair problems ensue.

Apr 27, 2009 | Kitchen Ranges

1 Answer

Indesit gas cooker, odd smell

Indesit Cucina cooker
My tenant is complaining of burnt metal or burnt rubber smells when the oven is hot, it is perfectly clean and only two years old

Nov 26, 2008 | Indesit K344GX Gas Kitchen Range

2 Answers

Indesit oven markings have been wiped off

Your model number can usually be found on a white or silver rating plate located somewhere on the product, usually the base, rear. Instruction books can be downloaded from the following link:

Jul 28, 2007 | Indesit KP9508EXG Dual Fuel (Electric and...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

682 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Kitchen Ranges Experts


Level 3 Expert

2096 Answers

Owen Barnes

Level 3 Expert

835 Answers

ray gallant

Level 3 Expert

39374 Answers

Are you an Indesit Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides