Question about Whirlpool GU2400XTPS Built-in Dishwasher

1 Answer

Clean light is blinking and cannot use dishwasher

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. If the green/clean light flashes, pauses, and then repeats. When the dishwasher doesn't sense a water temperature increase, it stops working and locks the functions (clean light flashes, all buttons are non responsive). It does this as a safety in case the element is broken and feeding electrical current into the water.

To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...


-high temp wash

-heated dry
-high temp wash
-heated dry


Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Posted on Jul 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO RESET THE CONTROL PANEL ON KUDE60HXSS4


My Kitchen Aide Dishwasher KUDE60HXSS4 has the clean light blinking and water is coming out of the dishwasher running down the back wall. The dishwasher will not come on. The clean light just blinks.

Jul 11, 2012 | KitchenAid Architect® KUDT03FT 24 in...

1 Answer

Clean llight blinks, owner manual said to replace


Hi,

The clean light blinking is due to a fault in heating the water, it could be several other things than the heat element. Here is a link to some instructions on how to reset the control so you can use the dishwasher, it also has a list of things that could have caused the not heating situation. Let me know if you have questions.

Blinking Clean Light

Jun 14, 2010 | Kenmore 24 in. 16049 Built-in Dishwasher

1 Answer

Blinking Green Light


Hi,

This indicates that the water did not heat properly. Follow the link below for instructions on what causes this and how to reset the control so you can use the dishwasher.

Blinking Clean Light

May 31, 2010 | Whirlpool 24 in. Built-In Dishwasher w/...

1 Answer

Blinking clean light


Hi,

This blinking indicates a failure to properly heat the water, the link below will have instructions on how to reset the control so you can use the dishwasher and it will provide areas to look as to why it failed. Let me know if it was helpful.

Blinking Clean light

May 23, 2010 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Clean light blinks, dishwasher won't start,


turn the power off at the breaker for 10 minutes and check it then.

Jun 11, 2009 | Kenmore 24 in. 15689 Built-in Dishwasher

1 Answer

Kitchenaid KUDS01FLBL2 dishwasher will not run


Juan, I found this http://fixitnow.com/wp/2007/01/20/blinking-clean-light-on-whirlpool-built-dishwashers/
It should help you out with the issue you are having with your dishwasher. Watch the video too!

Best of luck

Feb 25, 2009 | KitchenAid 24 in. KUDI01FLSS Stainless...

1 Answer

Dishwasher Clean light blinks constantly.


Try turning off the power to the dishwasher at the circuit breaker box. leave the power off for 5 10 mins and then turn breaker back on and try to restart dishwasher. This may reset the board and it may work

Feb 05, 2009 | Kenmore 16602 / 16604 / 16609 Built-in...

1 Answer

Dish washer 665.13824k601


LOCK LIGHT STAYS ON AND WILL NOT START. I HAVE TURNED THE POWER OF AT ELECTRICK PANEL AND IT STARTED ONE TIME. BUT DID NOT START ANYMORE.

HELP

Nov 27, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Blinking Clean Light


  • Close dishwasher door
  • press "Hi-Temp Wash"
  • press "Energy Saver Dry"
  • press "Hi-Temp Wash"
  • press "Energy Saver Dry"
run the 'normal' cycle without the hi temp feature

Nov 16, 2008 | KitchenAid 24 in. KUDI01FL - Multiple...

Not finding what you are looking for?

Open Questions:

See all Whirlpool GU2400XTPS Built-in Dishwasher Questions

Whirlpool GU2400XTPS Built-in Dishwasher Logo

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mike

Level 3 Expert

4340 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...