Question about Raypak 130,000 BTU Natural Gas Pool H...

Open Question

How can I check if my heater is working? I have a taypak HP130

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Every thing on my heater works except no heat


check that the control module is actually turning on the heater control to allow coolant to flow through the heater core. Check that you do not have an air lock into the heater.

Feb 14, 2014 | Dodge Stratus Cars & Trucks

3 Answers

Heater not working in 96 chey blazier


1. Check engine coolant.
2. Check heater core.
3. Check electronic control valve.
4. Check thermostat.

The problem lies within one of these four possible issues. =)

Nov 21, 2012 | 1996 Chevrolet Blazer

1 Answer

What's your problem?2008 Ford Taurus X, drivers seat heater w/n work. WHen you press the button for the seat heater to come on the light flashes and goes out.


Check fuses, check connections, check relays, if you get power to heater and it does not work the heater is likely at fault.

Apr 21, 2012 | Ford Taurus X Cars & Trucks

2 Answers

Cannot get the heater to work


CHECK SEE IF HEATER BLOWER MOTOR WORKING, REMOVE HEATER BLOWER MOTOR HOT WIRE HEATER BLOWER MOTOR SEE IF BLOWER MOTOR WORKING BLOWER MOTOR FAULTY OR YOU HAVE FAULTY WIRING AT BLOWER MOTOR AND RESISTOR.

Nov 05, 2011 | 1996 Mercury Grand Marquis

1 Answer

We have a 501 in our office and we have no hot water. I have checked the breakers and I don't know what to do from there. Any suggestions?


Hi,

If your electric hot water heater is not working...check out this tip about electric hot water heater problems

Electric Water Heater not Working
heatman101

Jan 12, 2011 | RELIANCE ELECTRIC WATER HEATER

1 Answer

Heater won"t work


Check your heater hoses for leaks, if they are fine you need to check the heater switch. The switch looks like a spring and is located on the front side of the heater core. Two screws and it comes out, if it is not broken check for water leaks. Your heater core is shot.

Jan 10, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

Heater system not working/heater value system /switches control working, but no heat, put theorstat in and no heat still/


Hello there :
What you are going to have to do is either check out the heater core by a shop or you can do it your self.
Check to see if all of the wires are connected to the heater motor and see if the heater motor is working if not replace it if it is working than i would then look into having the heater core replaced OK?

Nov 11, 2009 | 2003 Mitsubishi Galant

1 Answer

1990 Motorhome on a Chevy P30. Heater control vacuum. All the setting work fine except for the Heater. You push the Heat button and you start getting air out the outlets for about 3 seconds then the...


the the vacuum line for a broken one, check from the engine compartment first, check the fuse and all relays, check the a/c doors make sure they are not jammed.

Jul 31, 2009 | Chevrolet V30 Cars & Trucks

2 Answers

No Heat from heater


check your coolant level,
check to see if the thermostat is working properly
check to see if the water pump is circulating properly
check to see if the heater core is plugged
check to see if the heater control gate is working ( openning )

Oct 15, 2008 | 1998 Mercury Sable

Not finding what you are looking for?
Raypak 130,000 BTU    Natural Gas Pool H... Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Raypak Pool & Spa Experts

Bill Jordan

Level 2 Expert

372 Answers

paulcarew

Level 3 Expert

2458 Answers

Brad Brown

Level 3 Expert

15451 Answers

Are you a Raypak Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...