Question about Bose Lifestyle V30 Home Theater System - Black

1 Answer

My Bose V30 is connected to a Dish Network satellite receiver. I have the following 2 problems: 1. Cannnot set up the V30 remote to operate the receiver. The brands in the system menu of the receiver do not have the Dish receiver. What do I do? 2. The image blinks continuously. The problem is apparently with the Bose becuase when I connect the receiver directly to the TV, the image is perfect. The problem is not the HDM cable I am using since it works perfectly between the receiver and the TV.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,335 Answers

I can help you with your Bose Lifestyle V30 receiver problem.

Regarding you remote control issue: unfortunately, the Bose LifeStyle 30 remote is not a learning remote, so if it doesn't come pre-programmed with compatible control codes, it can't learn them. Without knowing the model number of your Dish Network receiver (301, or a pvr model?) I can't specify the manufacturer, nor a specific control code for your device. However, Bose customer service reps are renowned for being extremely helpful at giving compatible control codes for their devices. For their help, have your Dish Network receiver model number handy and call Bose's toll free tech support at 1-800-367-4008.

Regarding your blinking screen problem: In my experience, the first thing to try is to use component cables instead of HDMI. The red/green/blue RCA cables provide superior picture to HDMI, and several display problems can be fixed by simply switching to this cable format.

I hope that helps.
_______________________________________
Download Bose LifeStyle V30 User Manual

Posted on Jul 03, 2010

  • 1 more comment 
  • fgotay Jul 03, 2010

    Thanks for your prompt response.




    The receiver model is VIP 612 DVR. Any suggestion?

  • Paul Sager
    Paul Sager Jul 04, 2010

    Yes, my suggestion is that you use the universal remote that came with your DISH Solo VIP 612 to control your Bose V30 rather than the other way around. Bose tech support may still be able to talk you through the correct code for the DVR (when they open on Monday), but I can help you setup your DVR's remote today.

    The Bose code for a DISH Solo ViP 612 DVR Universal Remote is 761.

    I am currently publishing instructions on how to program a DISH Solo ViP 612 DVR Universal Remote control here at FixYa, & I will post you the links when I am done.

    I hope that helps.
    ________________________________________
    Download DISH Solo ViP 612 DVR Manual

  • Paul Sager
    Paul Sager Jul 05, 2010

    Help for programming the DISH Solo DVR ViP 612 Universal Remote has been published here:

    DISH VIP612 Program AUX Remote Code

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't find a code for my BOSE Solo on the Dish network Hopper remote. Can anyone help?


3mc0sk1,

I can definitely provide assistance with this! Our Hopper receive uses a special function to program the remote for you.

Go to Menu > Settings > Remote Manager. Select the option, 'TV Code', 'DVD Code', or 'AUX Code', based on the type of equipment you are programming. Once selected, follow the prompts on screen and it will automatically scan for codes!

Let me know if you have any other questions.

Tommy Faust
DISH Social Media Representative

Dec 30, 2012 | DISH Network IR Remote Control

2 Answers

Lost my Dish network remote for the upstairs tv (LG) - which has NO box. Is there anyway to program my TV remote, so I can access the TV staions - turn on the network basically???????


No,the Dish Network satalite box signals require it own remote for it INFER RED INPUT and INFER RED OUTPUT signals.Call Dish Network customer service ask for a another original Dish Network remote.U pay $5 or $6 dollars a month for the satalite box as rental.They should wave the fee or charge u very little for a another remote.

Sep 05, 2011 | Universal Remote Control Dish Network...

1 Answer

Unhooked all lines in back of tv cant remember to rehook up have2


granmabj,

There are common connections to each receiver but there are unique connections also depending on the receiver. Solo receivers have a coax cable coming from the Dish outside connected to Satellite In. Duo receivers and DVR HD receivers have the coax cable that comes from the dish outside that connects to Satellite 1 and Satellite 2 using a splitter. There is also a cable (coax, RCA (yellow, white, red) or component (green, blue, red - video, white, red - audio) or an HDMI if HD) connected from the receiver to the TV 1. For a duo receiver TV 2 may be backfed on the cable coming from the dish outside using diplexers. This may sound confusing but you can call 1-800-333-3474 for assistance.

Ray Calo
DISH Network

Jul 23, 2010 | DISH Network DVR-625 DTV Receiver /...

2 Answers

We just got a new Dish HD/DVR Receiver and need the remote code for the Bose remote control to operate it.


Here is what I did for my Bose Solo Tv to work on the Bell 9242 receiver.( see page 17 of Bell 9242 guide) 1. Hold down the aux button until all lights flash. 2. Press 2 to ensure Aux is set to audio. 3.Enter code 761 and press the pound (#) button. Now to have the satellite remote default volume to Bose Solo do the following. 1.Press and hold AUX 2.press # pound 3. Press the + side of volume 4. Press 0 5. Press pound ( AUX button will flash 3 times) 6. Press SAT mode 7. Test the volume on Bose Solo. (see page 22 of Bell 9242 guide)

Jul 05, 2010 | Bose 3 2 1 GSX System

1 Answer

After programming my NEW Harmony One Logitech remote I can't get it to change channels on the Dish HDTV DVR along with a bunch of other problems.


To control a Dish Network PVR/Satellite, it needs to be set to respond to the default Remote Address (1).

To reset your Dish Network PVR/Satellite to the default Remote Address:

1. Press SYSTEM INFO on the receiver's front panel. The System Information screen displays on the nearby TV and shows the Remote Address.
2. Using the original Dish Network remote, press and hold SAT on your remote control for about three seconds, until all of the mode buttons light up, and then release SAT.
3. Using the NUMBER PAD, press the 1 button
4. Press POUND (#). If you entered the address correctly, SAT will flash three times.
5. Press RECORD. Make sure the Remote Address you see on the System Information screen is 1.
6. Press the SELECT button on the front panel to close the System Information screen.
7. Your Harmony remote should now control your Dish Network PVR/Satellite box

NOTE: Dish Network PVR/Satellite receivers sometimes have two tuners, allowing them to be used in more than one room on different TVs. Harmony remotes can only control a Dish Network receiver's main tuner while still in the same room with direct line of sight to the device.


What other issues are you having with the remote?

Dec 25, 2009 | Logitech Harmony One Advanced Universal...

1 Answer

Connection to Bose V30 System


check hdmi setting from ur tv and ur dvd connection

Nov 08, 2009 | Bose Lifestyle V30 Home Theater System -...

2 Answers

Program sony remote to operate dish vip722


The Sony RM-YD029 Remote control will work with the Dish Network VIP722 DVR HD Satellite Receiver, but the Dish Network VIP722's Primary remote address must be set to 1.

The procedure below will allow Sony RM-YD029 remote control to operate Dish VIP722.

Using the Dish Network Remote Control -
1. Press menu 2 times to get to system info page
2. In the system info page the primary remote address is in a white box (bubble) followed by a Green TV (1)symbol that says IR and indicates you the channel your remote control one is configured. The Sony RM-YD029 will work when this primary remote address number (in the white box) is set to 1.

If the Primary Remote Address of your VIP722 Remote control 1 is not set to channel 1, here is how to change it:

1. While displaying the system info page, press and hold the SAT button on your dish network remote until all other modes are flashing, about 3 seconds.
2. then press the '1' button on the numeric pad of your dish remote
3. then press the '#' button on the numeric pad of the dish remote
4. then press the 'record' button (red dot button - stores setting)
5. At this point you should see a number 1 in front of the primary remote address on the dish system info page

Ensure you enter the corresponding IR code into your Sony remote control per the instructions in the manual or Sony's web site. My 722 works with Sony IR code - 01775.

Sep 08, 2009 | Sony BRAVIA XBR 52 in. LCD Flat-Panel HDTV

2 Answers

Need Dish DVR ViP722 remote code.


If you are looking to have the Dish remote operate your TV, just do a random search for your tv. First, hold down the tv button on the dish remote until all the rest of the light up. Next press the tvpower button on the dish remote. Next, press the channel up button (this is the up arrow button) until the set turns off. When it does turn off, press the # key at the bottom right of the remote. The tv button will light and flash twice. That's it. Your done. Hope this helps.

Feb 20, 2009 | Sony BRAVIA XBR 52 in. LCD Flat-Panel HDTV

1 Answer

Bose remote device code for directv satellite box


im living in st maarten nederlands antillies on the dutchside and i boutgh a sitilite box in newyork i ask the people if that can work in ST.Maarten they said yes but ST.MAARTEN is dish network i cant find the code program for the box that box is direct plus hd dvr directv satilite reciever. please can you help me.

Dec 01, 2008 | Bose 3 2 1 GSX System

Not finding what you are looking for?
Bose Lifestyle V30 Home Theater System - Black Logo

Related Topics:

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Ben Armstrong

Level 2 Expert

334 Answers

Are you a Bose Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...