Question about Sloan M-101526-F42 Flushmate?® Complete Replacement System for FM IV 504

1 Answer

I have a sloan m-101526 it works fine most of the time after sitting a length of time its like it loses its prime and has little power. flush it a couple of times and it works fine.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

Sounds like it's losing air pressure as it sets unused. If you haven't already, I suggest contacting Flushmate technical support at the toll-free number on the serial number label. They should be able to guide you in identifying the source of any air-loss and recommending a solution.

If it's under warranty and replacement parts are needed, they'll send them at no charge.

Hope this helps.

Posted on Aug 18, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a sloan toilet model M-101526/ it leaks out of top of tank when i flush it


Depending on the nature and source of the leak, it may be a maintenance issue or you may need to replace a component or the complete system.

You can find troubleshooting procedures, owner's manuals, etc., at www.flushmate.com.

For best results, jot down the serial number and toll-free phone number located on the Flushmate label and call Flushmate between 8:00 AM and 4:30 PM ET (Mon - Fri) for assistance.

Mar 18, 2013 | Sloan M-101526-F Flushmate?® Complete...

1 Answer

Hissing sound after flushing a flushmate


The washer that shuts the water off is failing. It shut stop incoming water completely when the tank is full.

Jan 11, 2013 | Sloan M-101526-F Flushmate?® Complete...

1 Answer

Constantly running


one of two things one flapper valve bad -or flush valve bad or out of adjustment

Nov 28, 2012 | Sloan M-101526-F42 Flushmate?® Complete...

2 Answers

I have a Sloan Flushmate mod M-101526-F3. It seems to be laking the pressure to flush away the waste completely. Is there an adjustment that I can make?


Hi,
The only adjustment you can make is to crank your water pressure up...
But that probably will not solve your problem...
The best thing to do is to call the 800 number on the top of the tank and get technical assistance from them directly... they also will send you free parts if you need parts...

heatman101

Sep 08, 2010 | Sloan M-101526-F42 Flushmate?® Complete...

1 Answer

We have 4 flushmates & one of them does not shutoff after flush'g & fills up our septic tank ----how do i ajust it to stop


there is no adjustments for the flush mate. only adjustment is for the handle. if your flushmate is not shutting off after flushing, you need to replace the flush valve.

Aug 09, 2010 | Sloan M-101526-F42 Flushmate?® Complete...

1 Answer

It take about three time for the trip lever to flush the tolet what my trouble shooting for this


Hi,
The round thing in the center that the metal rod pushes down on can be turned...turning it counterclockwise will make it higher and get you flushing...
It may take a bit but you can get it adjusted so that it will flush everytime..

heatman101

Aug 07, 2010 | Sloan M-101526-F42 Flushmate?® Complete...

10 Answers

I have a Sloan Flushmate, Model #M-101526-F3. The


Absolutely not! Because these tanks have air pressure inside them, and you can hurt yourself or somebody else. You need to get new one... take a look here Amazon com Sloan Flushmate tank. I hope this was helpful. cheers

Jul 10, 2009 | Sloan M-101526-F42 Flushmate?® Complete...

Not finding what you are looking for?
Sloan M-101526-F42 Flushmate?® Complete Replacement System for FM IV 504 Logo

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sloan Home Experts

Brad Brown

Level 3 Expert

15557 Answers

john h

Level 3 Expert

12104 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

14793 Answers

Are you a Sloan Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...