Question about Car Audio & Video

1 Answer

Need pin out diagram for the 6 pin mic on a Cobra 29 WX NW BT cb radio for installation of an echo board. Connetions for audio, Rx, Tx, etc.

Posted by on

  • rongw1 Jul 03, 2010

    Fially I can finish this little project. Couldn't seem to find this anywhere. Thank you very much.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,807 Answers

Hi


rongw1,
As per your request :

Need pin out diagram for the 6 pin mic on a Cobra - 032528a.jpg


12bc7b5.jpg



• Color Coding

White Audio

Red PTT

Black RX

Screen + Blue Earth



• Need pin out diagram for the 6 pin mic on a Cobra - 8c26dd2.jpgis for 6 pins


8c26dd2.jpg




You can also short momentarily one of the pin , one by one to

chassis to verify. The TX light will appear, But be sure there is an

antenna connected to the radio.


I'll post for more , if these aint the one your looking!







Posted on Jul 03, 2010

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wiring the mic 4 pin


#1 shield #2 white #3 red #4 black
#1 gr #2 tx #3 tx #4 rx

Apr 10, 2014 | Cobra 25 Wx Nw St Classic Cb Radio With...

1 Answer

I have a cobra29 wx nw st. its been peaked and tuned, an echo board installed, and soundtracker override when i key up if my mic gain is over 1/4 the way up it makes an awful racket what do i do?


is there talk back installed? if so its probably too loud. You are getting feed back. The talk back should be low, just enough to hear it to check echo. 470 ohm resistor is perfect.

Jan 04, 2010 | Cobra 29 WX NW ST 40-Channels Base CB...

1 Answer

How do you wire atrb-x2 echo board in a cobra 29 cb i was told the white wire inside the radio is the audio wire mine does not have awhite wire on the mic con. on the inside


don't worry about wire colors. pin 1 is ground. some mic's need two wires for ground depending on the PTT switch used. pin 2 audio. pin 3 TX pin 4 RX.. thats all there is too it. once you know the pins all radios are easy. galaxy/connex/genlee same pin outs except pin4 isnt' needed for RX but can be used for 9v dc to power micropohnes.

Nov 26, 2009 | Cobra 148 GTL 120-Channels Base CB Radio

2 Answers

Looking to install astatic echo board in uniden PC78XL


usally on most radios you will unplug the wire that comes from the number two mic plug. you will hook you sheid witch is the 2 little black wires from the echo board to number one mic plug. then the two wires will go to wire you unplug and the other one will go to number 2 mic plug.

Jul 04, 2009 | Cobra 29 WX NW ST 40-Channels Base CB...

1 Answer

Installing a astatic echo board in a cobra 29 nw please help


http://www.cbtricks.com/ Here is the best site to modify Cbs on the web as well as fourms to help answer questions.

Jun 14, 2009 | Cobra 29 WX NW ST 40-Channels Base CB...

1 Answer

Trying to hook up a astatic echo board


Looking at the plug from inside the radio, with the nub facing downward, from right to left you have pin1 pin2 pin3 and pin4.

1-Shield
2-Audio
3-Transmit
4-Receive

Colors are

1- Red
2-White
3-Blue
4-Black

Mar 24, 2009 | Cobra 29 WX NW ST 40-Channels Base CB...

1 Answer

Cobra 29 nw ltd won't transmit


Have you cracked the radio open yet?  check for loose connections etc.  get back to me if that doesnt yeild any results

Dec 23, 2008 | Cobra 29 LTD CB Radio

1 Answer

Echo on cobra 29


When you purchase an echo board, the instructions come with them.

If you need any help, don't hesitate to email me at rollincbmods@yahoo.com

Dean Pitts
Rollin CBs

Aug 25, 2008 | Cobra 29 WX NW ST 40-Channels Base CB...

1 Answer

Echo on a cobra 29 nw


When you purchase an echo board, the instructions come with them.

If you need any help, don't hesitate to email me at rollincbmods@yahoo.com

Dean Pitts
Rollin CBs

Aug 25, 2008 | Cobra 29 WX NW ST 40-Channels Base CB...

1 Answer

29 help


hi, sounds like you have a problem with the SWR' S Probably too high. Tumbleweed01

Mar 12, 2008 | Cobra 29 WX NW ST 40-Channels Base CB...

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4834 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

The Knight
The Knight

Level 3 Expert

73591 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...