Question about NorStar Meridian M7310 Phone

2 Answers

Hi there ... We have 4 lines in the office but on one of our M2000 series Meridian phones only the first 2 line buttons receive a dial tone ... How do add lines 3 and 4 to the next 2 buttons?

Posted by Anonymous on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • NorStar Master
  • 860 Answers

Programming is done on M7310, M7324 and T7316 sets.
To set up line appearence you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt,
press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you wish to program the new lines on.
Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear & ring
press the next key (bottom right arrow) till it says 003:unaaign.
press the chng key till the screen says appear&ring
Press the next key(bottom right arrow)
The display should say line 004: unassign
press the chng key til the screen says appear&ring
press the Rls key when finished

Posted on Jul 03, 2010

  • george  peters
    george peters Jul 13, 2010

    The last number redial key is a "filler" key added by the telephone system when the line 3 key was erased. You'll need to add an appearence of line 3 to make it stop ringing on the intercom key.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have M7310 phones, that used to have 3 lines working, now when you dial the line 3 #, you can only answer it from the intercom button. The line 3 buttin now seems to be programmed for last # redial.

Posted on Jul 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Meridian M3820 - why is display not working


Try another 4 wire phone cord from the wall jack to the phone it is possible that you have a bad cord. These phones will only work with a Meridian System .2 wires are line ,the other 2 wires are power to the phone. If you have another phone try plugging it into the same wall jack to check the jack/line itself. Anything else would be a defective phone/ lcd ( note you can have dial tone without display, but the unit will only access one line.

Feb 19, 2015 | Nortel Meridian M3820 Corded Phone

1 Answer

M7310 Non-Stop Dial Tone


Intercom button/s provide dial tone when they are pressed. They are required to call other phones on your system.
Sounds like your button is stuck or issue with the motherboard.

Dec 17, 2012 | NorStar Meridian M7310 Phone

2 Answers

How to program speed dial on T7208 telephone?


Programming
memory buttons
External autodial
1. If you are on a call or an open line with dial tone, press Hold
or Rls
2. Press Feature * 1
3. Press a memory button.
4. Dial the external number.
5. Press Hold to store the number.
6. Label your new button.

Internal autodial
1. If you are on a call or an open line with dial tone, press Hold
or Rls
2. Press Feature * 2
3. Press a memory button.
4. Dial the internal number.
5. Label your new button.

Features
1. If you are on a call or an open line with dial tone, press Hold
or Rls
2. Press Feature * 3
3. Press a memory button.
4. Press Feature and the feature code.
5. Label your new button.

Erasing memory buttons
1. If you are on a call or an open line with dial tone, press Hold
or Rls
2. Press Feature * 1
3. Press the memory button you want to erase.
4. Press Hold to erase the button.

Feb 13, 2010 | Nortel Meridian M7208 Corded Phone

1 Answer

No dial tone


It sounds like you have the wires hooked up wrong. Check both ends of the wire.

Jun 01, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

Buttons won't work


Try taking a credit card or ID card and placing it on its side across the top of the keys. Then swipe it down across the keys. This should unstick any of the keys that may be stuck and your phone should start working fine.

Jan 14, 2009 | Nortel Meridian 9417CW 2 Line phone

2 Answers

Meridan 7208 help please


Dear sheryl498,

Your phone is designed for a PBX (Private Branch Exchange) unit like the Compact ICS or the 6x16 TCU that was at the office. It is not compatible with regular POTS lines or standard home lines.

Jul 29, 2008 | Nortel Meridian M7208 Corded Phone

2 Answers

Can't dial out


What are you getting when you try to dial out? Sounds or display wise? How are you dialing out? Do you access a line, dial 9 from intercom? The dial tone is probaly the phone system generated dial tone. With more information, I can help..

Oct 25, 2006 | Nortel Meridian 9417CW 2 Line phone

Not finding what you are looking for?
NorStar Meridian M7310 Phone Logo

717 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...