Question about NetGear WNDR3300 - RangeMax Dual Band Wireless-N Router

1 Answer

When I try to power cycle my wndr3300 it won't properly boot up until I have waited 90 mins. If I try to power up sooner (say 1 min 5 min 1 hour) the green power light blinks slowly and the router never finishes booting up.

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Contributor
  • 81 Answers

I would advice you to perform a firmware update on your unit.
There is a possibility that your unit firmware is corrupted or it could be a problem with some chips inside your router.

Please click on the link below if you want to proceed on updating your router to latest software.
http://kb.netgear.com/app/products/family/a_id/13607

Please select the right version for your device. You can also 1888Netgear if you need assistance on doing this procedure.

Cheers,
KJ

Posted on Jul 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why isn't my netflix working properly?


Netflix Customer Phone Number Shortest Wait Best Support
Phone Number
888-638-3549
Talk to a Human
Press 0 at each prompt.
Average Wait: 5 mins - 24 hours, 7 days
Netflix Customer Phone Number Shortest Wait Best Support
Phone Number
888-638-3549
Talk to a Human
Press 0 at each prompt.
Average Wait: 5 mins - 24 hours, 7 days

Sep 12, 2014 | Netflix

1 Answer

Lugreen6115@yahoo.com


NETFLIX CUSTOMER SUPPORT PHONE:
1-888-638-3549
PRESS 0 AT EACH PROMPT.
Average Wait: 5 mins - 24 hours, 7 days
OR
Netflix Calls You Instead
http://gethuman.com/call-back/Netflix/
http://www.netflix.com

NETFLIX CUSTOMER SUPPORT PHONE:
1-888-638-3549
PRESS 0 AT EACH PROMPT.
Average Wait: 5 mins - 24 hours, 7 days
OR
Netflix Calls You Instead
http://gethuman.com/call-back/Netflix/
http://www.netflix.com

Aug 26, 2014 | Netflix

1 Answer

How to fix error code M7363-1261-00000002?


NETFLIX CUSTOMER SUPPORT PHONE:
1-888-638-3549
PRESS 0 AT EACH PROMPT.
Average Wait: 5 mins - 24 hours, 7 days
OR
Netflix Calls You Instead
http://gethuman.com/call-back/Netflix/
http://www.netflix.com

also try using a different browser like Firefox you can get it INSTALLED at http://www.ninite.com

NETFLIX CUSTOMER SUPPORT PHONE:
1-888-638-3549
PRESS 0 AT EACH PROMPT.
Average Wait: 5 mins - 24 hours, 7 days
OR
Netflix Calls You Instead
http://gethuman.com/call-back/Netflix/
http://www.netflix.com

Aug 22, 2014 | Netflix

1 Answer

How to perform factory reset procedure pro1150hd


Factory Reset Procedure

1 With TV off/in standby....press home menu.
2 Within 3 sec turn TV on , Integrated Menu will appear.
3 Hold Display button until Final Setup appears in the top menu.
4 Arrow leftor right until yes appears in lower menu.
5 Hold enter until menu disappears.
6 Wait 1 min.
7 Power TV off and unplug from the wall for 5 or more min.

You can also try this:
Home Menu, select Picture, select "Reset", then ENTER, then select "Yes" and press ENTER.

May 09, 2014 | Televison & Video

1 Answer

How do I program the H5CX ASN timer to turn on 5 mins and off 25 mins in an endless cycle. I don't understand the term Output Mode so from that point the instructions become meaningless.


Omron:
https://www.ia.omron.com/support/
http://waterheatertimer.org/pdf/h5cx_sell-sheet-wiring.pdf

I believe you have 230Volt 50 Hz electric power.
Omron is rated 50-60 hz
US timers are rated 60 Hz.
Maximum load on Omron timer is 5amp at 230 volt
Timer should be connected to 2-pole contactor (relay) instead of directly connected to pump.
http://waterheatertimer.org/images/contactor-drawing.gif

Does Amazon sell percentage cycle timer in your country?
A cycle timer makes one full revolution each hour, or 4-hours, or 12 hours. Then percentage is set for 8% for 1 hour cycle.
Contact Intermatic and ask if they have 50 cycle percentage cycle timer, or ordinary cycle timer in 50 Hz.

Nov 22, 2012 | Omron H5CX A AC100-240 Multifunction...

1 Answer

I had a power failure in my area. When power was restored my pc booted up ok but the monitor screen only stays visible as it should for about 3 seconds, then it goes black screen. I have powered...


Close windows down. Wait 15 - 20 mins, then power monitor up but NOT windows. Screeen should say "NO SIGNAL in centre. If t does not, wait five mins If still no display shut down and wait another 5 mins. Then start monitor un ANDt windows.. All should be OK now, If not shut EVERYTHING down and disconnect from mains ovrernight. (PC riouter/modem,,,, EVERYTHING . 12 hours later, re-connetc in THIS order - 1.) MONITOR 2.) PC 3) ROUTER/MODEM Should be OK now.

Aug 17, 2011 | Acer X193W LCD Monitor

1 Answer

My Sony Vaio VGN-NS110D Laptop computer won’t boot up, it cycles through to a black screen with the mouse pointer there which I can move. Apparently this is called the ‘black screen of death’! I can’t do...


Try these 1) Shut down the system 2) Remove the battery 3) Hold down the power button for say 2 minutes 4)Put the battery back 5) Boot the system
If you still hit the black screen with a cursor: 1) Wait for 2 mins at the black screen 2) Just type in your windows password (if you don't have one hit enter) and press enter 3) Wait for another 2-3 mins 4) Hit Alt Ctrl Delete and go to task manager (this time it should take you to the task manager) - fingers crossed LOL 5) Now do new task - explorer.exe
Hopefully you should be back in action.
Note, this is a work around and for a permanent fix either try and clean your system (check for viruses) or reinstall the system. Hope this helps.

Oct 07, 2010 | Sony Computers & Internet

1 Answer

Whirlpool Senseon Gas Dryer- will let not start


Reboot the curcuit board by unplugging for 5 min. Then replug and wait 1 min before selecting cycle. Too many selection in a short period of time can overwelm the little brain in the board.

Apr 30, 2009 | Dryers

1 Answer

Printed wash cycle info missing from front of machine


Quick wash cycle for the Hotpoint FEW12 is 'K'

A 95* White cotton, heavy soil ........ 5.5kg 2hours 30/40 mins Fast spin
B 40* White cotton Heavy soil .......5.5kg 1hour 40/50 mins Fast spin
C 95* White cotton and linen without special finishes......5.5kg 2 hours 20/30 mins Fast spin
D 60* Colour fast cotton, linen or viscose without special finishes......5.5kg 2hours 5/15 mins Fast Spin
E 40* Non-colour fast cotton, linen or viscose.....5.5kg 1hour 40/55 mins Fast spin
F 50* Synthetics, coloured nylon, polyester, acrylic & cotton mixtures, cotton or viscose with special finishes, coloured polyester & cotton mixtures.....3kg 1 hour 5/15 mins Slow Spin
G 40* Acrylics and tri-acetate blends of these fabrics with wool, polyester & wool blends....3kg 40/50 mins Slow Spin
H 40* Wool, shrink resistant machine washable wool, woolen blankets..... 1.5 kg 1 hour 15/25 mins Fast Spin
H...(Wool mixtures with cotton or rayon.....2.5 kg)
J 30* Silk, printed acetate.....3kg 55 mins/1 hour 5mins... Slow Spin
K Quick wash for freshening up lightly soiled items. Warning... not for woolen, silk or delicate items.....1kg 35/45 mins Slow Spin
L Cold wash, cold fill only, no heating action....3kg 55mins/1hour 5 mins Slow Spin
M Rinse and Fast Spin... cotton......5.5kg 55 mins/1hour 5mins...Fast Spin
N Rinse and Slow Spin... Delicates....3kg 30mins Slow Spin
P Fast Spin .... cotton.... 5.5kg 15 mins Fast Spin
Q Slow Spin.... delicates.....3kg 15 mins Slow Spin

Hope this helps

Sue

Jul 14, 2008 | Hotpoint First Edition FEW12 Front Load...

1 Answer

Long wash times


I've had this problem, particularly with towels - it's quite annoying & not energy or water efficient at all. According to the manual, the unit has a sensor that senses if there is too much soap & it will continue to wash until the soap is removed. I found that this happened frequently on the "cotton" cycles & max spin. I've tried to make sure I use less soap, but I also use the perm-a-press cycle & the spin 1 down from max. Hope this helps

Sep 07, 2007 | Bosch WFMC 3200 Front Load Washer

Not finding what you are looking for?
NetGear WNDR3300 - RangeMax Dual Band Wireless-N Router Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...