Question about Computers & Internet

1 Answer

I have a folder in my D: drive and i wanted to move it to my external harddiskso when i tried to move itafter few seconds it shows cyclic redundancy check

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,737 Answers

I hope your folder must be a partition not a folder. If so, it's not possible to move all the files with the drive name, but it's possible to copy/paste. Since it's a part of your system (virtually or physically) you'll get the message. There's also another condition, suppose if you had installed some programs or windows on the D drive, it's not possible to copy/paste all the files since they are being executed (if you install only third party or terminable programs after you "end" the running programs).
I would recommend you to copy folder by folder not the whole drive at once.

Good luck.


Thanks for using FixYa.

Posted on Jul 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Data error cyclic redundancy


Hi
There are several situations that might have caused a damaged to the driver.

DATA ERROR CYCLIC REDUNDANCY might have been caused by a Virus attack. And in those cases, you will provably end up buying a new hard drive.
How would I know that? Well, just check your memory and remember if you had been doing some Internet search/chat/downloading some stuff/visiting unknown sites, etc., prior to the damage.
It ussually happens when you are using Chat programs, in which you may have received a file or a link to visit to

(most likely the virus made an unrecoverable damage on the main section of the drive, the MBR - Master Boot Record)

Feb 07, 2014 | Western Digital My Passport Essential...

1 Answer

Cyclic redundancy check


A cyclic redundancy check error on a hard disk means that part of a file read from the hard disk doesn't match the expected value.
A cyclic redundancy check error, in other words, means that files on your hard drive are corrupted.
Repair a cyclic redundancy check error on a hard disk using the Check Disk tool in Windows.

Click "Start" and click "Computer."
Right-click the hard disk with the cyclic redundancy check error under "Hard Disk Drives" and click "Properties."
Click the "Tools" tab at the top of the hard disk "Properties" window.
Click "Check Now" under "Error Checking."
Select "Automatically Fix File System Errors" and "Scan for and Attempt Recovery of Bad Sectors" in the "Check Disk" window by clicking each option if it isn't already selected.
Start a disk check and repair by clicking "Start" in the "Check Disk" window.
Click "Yes" if the "Do you want to schedule the disk check to occur the next time you restart the computer?" prompt appears.
A disk can't be checked if it's in use, so you'll need to restart Windows to check it.
Restart your computer by clicking "Start," clicking the arrow icon to the right of "Shut Down" and clicking "Restart."
(External drives will not schedule to happen on restart it will happen straight away.)

Sep 09, 2013 | Verbatim 500GB USB Desktop 500 GB Hard...

1 Answer

Cyclic redundancy error


A cyclic redundancy check error on a hard disk means that part of a file read from the hard disk doesn't match the expected value.
A cyclic redundancy check error, in other words, means that files on your hard drive are corrupted.
Repair a cyclic redundancy check error on a hard disk using the Check Disk tool in Windows.

Click "Start" and click "Computer."
Right-click the hard disk with the cyclic redundancy check error under "Hard Disk Drives" and click "Properties."
Click the "Tools" tab at the top of the hard disk "Properties" window.
Click "Check Now" under "Error Checking."
Select "Automatically Fix File System Errors" and "Scan for and Attempt Recovery of Bad Sectors" in the "Check Disk" window by clicking each option if it isn't already selected.
Start a disk check and repair by clicking "Start" in the "Check Disk" window.
Click "Yes" if the "Do you want to schedule the disk check to occur the next time you restart the computer?" prompt appears.
A disk can't be checked if it's in use, so you'll need to restart Windows to check it.
Restart your computer by clicking "Start," clicking the arrow icon to the right of "Shut Down" and clicking "Restart."
(External drives will not schedule to happen on restart it will happen straight away.)

Sep 09, 2013 | Verbatim 500GB USB Desktop 500 GB Hard...

3 Answers

How can I fix Cyclic Redundancy Check on external drive?


This problem is caused by bad sectors on HDD. refer to http://www.goodlucksoft.com for more information

Feb 20, 2013 | Computers & Internet

2 Answers

Cyclic redundancy error when copying backed up files into Itunes


Files with cyclic redundancy errors means these files are corrupted and cannot be copied. Since you cannot copy these files from your faulty hard disk again then these songs are lost and you need to download them again.

Nov 27, 2012 | Apple iTunes

1 Answer

500 MB data error(cyclic redundancy check) external hard drive is not accessible


1. this ( cyclic redundancy check) is the computers way of saying " i don't recognize the data check-sum.
2. This issue could be due to the data controller on the USB drive being defective.
3. try purchasing a new case with a new controller board.
4. Check to see if your 1TB USB drive is compatible with your pc.

Jun 13, 2011 | Toshiba 1TB Canvio for Mac USB 2.0...

1 Answer

The Samsung Freeagent GoFlex external hard drive is not recognized by Windows 7 OS. I tried to initialize disk under computer management / storage / disk management and got the cyclic redundancy check...


This is a good read on what this error actually means:
http://www.softwarepatch.com/tips/cyclic-redundancy.html

What I recommend is reformatting the drive under Computer Management, and seeing if that fixes the problem.

May 03, 2011 | Seagate FreeAgent GoFlex Pro 500 GB USB 20...

1 Answer

I'm trying to move an mp3 file from the desktop to my flash disk but a pop-up window always appears saying "cyclic redundancy check". what shall i do?


Everytime that you write a block of data to your 'C:' drive, a CRC ("Cyclic Redundancy Check") value is calculated, based on the data, and it is written onto the disk, right after the data.

When you ask to read that data, the CRC also is read from the disk.
A new CRC is calculated from the data that was read.

If the "new" CRC is "checked" against the "old" CRC.
If the two values do not match, then the disk-drive either did not correctly write the data,
or it did not correctly read the data.

So, that part of the disk-drive occupied by your MP3 file is "bad".
It might be a sign that the ENTIRE disk-drive is soon to completely FAIL.

> what shall I do?

Backup all your files to an external storage device, while you still can access your files.

Nov 13, 2010 | Computers & Internet

1 Answer

HI GOOD EVENING I AM UNABLE TO COPY MY MICROSOFT OUTLOOK 2007 PST FILE TO EXTERNAL HARD DISK. AFTER STARTING COPY FEW MINUTES LATER I FACE THE FOLLOWING PROBLUM CANNOT COPY OUTLOOK:DATA ERROR(CYCLIC...


A "CRC" (Cyclic Redundancy Check) is caused by an disk-drive error.

When you write a "block' of data to your disk-drive, a CRC value is calculated, and is also written to the disk. When you try to read that "block" of data, the CRC value is also read from the disk,
and a new CRC is calculated from the data. If the "new" CRC does not match the "old" CRC, then you have a "check" condition -- either the data was not written correctly, or the data could not be read correctly.

Now, did the "check" message refer to the "source" of the copying operation (namely your 'C:' drive) , or the "target"(namely the external drive) ???

Try to copy the PST file to another file on your 'C:' drive.
If you do not see the "check", then it is the external disk-drive that has a problem.
If you do see the "check", then open Outlook, create a new folder,
and copy a group of messages into the new folder. If Outlook reports that one of the messages could not be copied, then the disk-space occupied by that message is faulty, and must be excluded.

Sep 07, 2010 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...