Question about Dishwashers
SOURCE: flashing light
I had this problem at home too, it turned out to be a kink in the water outlet pipe. I straightened out the kink in the pipe, put duct tale around it to strenghten it and the dishwasher has been working perfectly since.
Posted on Sep 22, 2008
F3 error fault code
The heating cycle is not working. The error is indicated after several electronic checks are done over a 25 minute period. Therefore if the heater heats too slowly or the heater is open circuit or indeed the electronic control PCB is defective, each of these will indicate F3. The twist is, if the NTC is fluctuating in its reading it also can indicate F3 and not F1.
Posted on Feb 21, 2011
Tips for a great answer:
Jan 11, 2014 | Dishwashers
Nov 23, 2011 | Whirlpool 24 in. ADP5966 Free-standing...
Oct 21, 2011 | Dishwashers
May 24, 2011 | Whirlpool 24 in. ADP6940 Dishwasher
Sep 17, 2009 | Whirlpool 24 in. ADP6940 Dishwasher
Sep 01, 2009 | Whirlpool GU2400XTP Built-in Dishwasher
Feb 08, 2009 | Kitchen and Much More Dishwashers
Aug 08, 2008 | Whirlpool 24 in. ADP5962 Free-standing...
May 13, 2008 | Whirlpool 24 in. ADP5966 Free-standing...
668 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: