Question about Motorola Mobility RAZR V3

1 Answer

How can I reset my phone lock pass code

I have the option to set my phone so that a 4 digit pin has to be used in order to accsess messages,pictures, call history and etc. I forgot it and cant check any text mess,pictures ao take any or get my call history. please help

Posted by on

  • nelle nell May 02, 2008

    my phone droped and the battery fell out and know i cant turn my phone on because i lost the pin. i need help

  • Anonymous Sep 03, 2008

    i forgot my 4 digit password on my razr to get into my text messages

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 242 Answers

In order to access the phone, you need the PUK-code, belonging to your SIM-card. Either you got this code with your SIM-card, or you can get it from your service provider. If you have already tried to fill in your PIN three times, you are asked for your PUK.

Posted on Apr 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need master reset for lg 265


Allows you to reset your phone to the factory default settings.
1. Press OK, 9, 4.
2. Enter the four-digit lock code and press OK.
3. Press 5 Reset Default and press OK.
4. Read the displayed message and press OK to continue.
5. A message will pop up that says "Preference settings will
be set to factory defaults.
Press <OK> to continue."
Press OK.
6. Use UP/DOWN keys to highlight an option (below) and press OK. Revert/ Cancel.
You can use LG Mobile Support tool to repair some LG cell phone model, after download select menu Customer Support > Recovery Phone

If you know LG 265 hard reset with buttons / keys pls leave comment.




Mar 28, 2014 | Cell Phones

Tip

Secret codes for nokia


92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345
Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin#
*#7328748263373738# resets security code.
Default security code is 12345
Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold "0" on the main screen to open wap browser.

on Jun 23, 2010 | Cell Phones

2 Answers

How to put pin codes to lock others from accessing info


Select the "Menu" option from the main screen on the phone.

  • 2 Click the option for "Settings" and then "Security Settings."
  • 3 Scroll to and select "Change access codes."
  • 4 Scroll to and click "Change PIN code."
  • 5 Type in the current PIN code. The default code is either 1234 or 0000 (four zeros).
  • 6 Select the "OK" option to confirm.
  • 7 Type in a new PIN code of your choice and select "OK." Remember this password for future use. If you lose it and need to change the PIN code again, you will have to completely reset the phone, which may cause you to lose all data.
  • 8 Type in the new PIN code again to confirm that you entered it correctly.
  • 9 Click the option to "Save" and then "OK" to confirmation when a message appears.
  • Oct 06, 2011 | Nokia 1280 Cell Phone

    1 Answer

    How do I clear all information from a LG VX5500 Cell Phone before returning it.


    Steps to Reset Settings
    This resets the phone to factory default settings.

    1. With the flip open, press the OK key [Menu].
    2. Press 9 or Settings & Tools.
    3. Press 6 or Phone Settings.
    4. Press 7 or Security.
    5. Enter lock code. The default lock code is the last 4 digits of your phone number.
    6. Press 5 or Reset Default.
    7. Press OK after reading the warning message.
    8. Select Revert by pressing OK. A confirmation message is displayed briefly before the phone resets itself.

    Steps to Restore Phone
    This erases all user data and contact information entered in phone memory.

    1. With the flip open, press the OK key [Menu].
    2. Press 9 or Settings & Tools.
    3. Press 6 or Phone Settings.
    4. Press 7 or Security.
    5. Enter lock code. The default lock code is the last 4 digits of your phone number.
    6. Press 6 or Restore Phone.
    7. Press OK after reading the warning message.
    8. Enter lock code. The default lock code is the last 4 digits of your phone number.

    Sep 14, 2011 | LG VX5500 Cell Phone

    2 Answers

    Forgot password


    remove my passward in my cell

    Jun 02, 2011 | Samsung SCH-U470 Juke Cellular Phone

    1 Answer

    Forget pin code for adding a prepaid card


    Hello,
    You might have to do a factory reset. You can do so while in standby mode, press "ok" for the Menu. Then select Settings & Tools > Phone Settings > Security > Enter the lock code (default pass is last 4 digits of your cell phone number) > Restore Phone > Confirm resetting handset > Press OK to re-program the phone. Now enter the lock code again and press OK to restore the phone to the factory default settings.
    Note: Press *228 and SEND after the power cycle to re-program the phone

    Mar 02, 2011 | Samsung SCH-U450 Cell Phone

    1 Answer

    I want to reset my phone factory settings but i dont know how to


    On the main screen type in:
    1. *#06# for checking the IMEI (International Mobile Equipment Identity).
    2. *#7780# reset to factory settings.
    3. *#67705646# This will clear the LCD display(operator logo).
    4. *#0000# To view software version.
    5. *#2820# Bluetooth device address.
    6. *#746025625# Sim clock allowed status.
    7. #pw+1234567890+1# Shows if sim have restrictions.
    8. *#92702689# - takes you to a secret menu where you may find some of the information below:


    1. Displays Serial Number.
    2. Displays the Month and Year of Manufacture
    3. Displays (if there) the date where the phone was purchased (MMYY)
    4. Displays the date of the last repair - if found (0000)
    5. Shows life timer of phone (time passes since last start)
    *#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
    *#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
    *#4720# - Half Rate Codec activation.
    *#4720* - Half Rate Codec deactivation. The phone will automatically restart
    If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
    Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345
    Press *#3925538# to delete the contents and code of wallet.
    Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# \
    *#7328748263373738# resets security code.
    Default security code is 12345
    Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold "0" on the main screen to open wap browser.
    Thanks.

    Apr 23, 2010 | Cell Phones

    2 Answers

    FORMAT CODE FOR MOTOROLA L6


    my motorola l6 is keep on restarting when ever i press a key so i thought it might get better to reformat my phone so i need the format code for it.

    Mar 23, 2009 | Motorola Mobility L6 Cellular Phone

    7 Answers

    I need my 4 digit id code b 4 i can get my puk number but i forgot it


    you have to phone 07973100450 from a land line. it will ask you for your phone number a few times then it will pass you to  a REAL person who will ask you ask you a few security questions like what are the last four numbers of your top-up card and vol lia that is how you get your four digit id code!!!!!!!

    Feb 22, 2008 | Nokia N73 Cellular Phone

    3 Answers

    Privacy files lock


    *2767*cust#.after this,pass should be 8 zeroes

    Sep 04, 2007 | Samsung SGH-E900 Cellular Phone

    Not finding what you are looking for?
    Motorola Mobility RAZR V3 Logo

    79 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Motorola Mobility Cell Phones Experts

    D. E. Hev

    Level 3 Expert

    1059 Answers

    Lawrence Oravetz

    Level 3 Expert

    7565 Answers

    Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...