Question about Kenwood KDC-135 CD Player

1 Answer

Kenwood cd player to an 05 jeep - no sound

I matched up all the wires from the harness i bought for the jeep to the harness to the cd player..... no sound. my subwoofer worked but thats it. no sound through any of the speakers. my stock deck works fine......
there are two wires on the kenwood harness that dont match up to anything. a tanish color one and a light pink one witha black line.....

what am i doing wrong here?

Posted by on

  • Anonymous Mar 25, 2014

    Installed an aftermarket Kenwood CD player, a Panasonic amplifier and a subwoofer. Once all was installed, the heater only works intermittently but mostly pumping out freezing cold air, seems to be worse when certain buttons are pressed on the Kenwood deck.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 132 Answers

Hook the Blue/white striped wire to the power antena lead of the jeep (blue) to turn on the factory amp

Don

Posted on Jul 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hooking up kenwood cd player in a 2000 silverado but the wires aren't labeled coming out of the cd player. Pls help


If you use a wire harness adapter, you just have to match the colors from the Kenwood plug to the wires in the adapter. No guesswork.

Kenwood uses the CEA standard for car audio wiring:

Yellow: 12VDC constant power
Red: 12VDC key-switched power
Black: Ground
Orange/White: Illumination
Blue/White: Remote output for amp turn-on
Blue: Power antenna activation

White: Left front speaker (+)
Gray: Right front speaker (+)
Green: Left rear speaker (+)
Violet: Right rear speaker (+)

Each wire with a black stripe is a negative speaker output.

You can download owners' manuals from Kenwood's web site.

http://manual.kenwood.com/en_contents/search

Jul 16, 2015 | Kenwood Car Audio & Video

1 Answer

No sound.


The first thing you need to do is doublechecking all the new wirings, it sounds like a contact.

Oct 24, 2008 | Kenwood KDC-MP338 Car CD Player

1 Answer

How to install a Kenwood kdc 138 in a 1992 Ford Escort LX?


if its anything like my 92 ranger you take the dash apart around the radio and the stereo should unscrew, in my ranger the new cd player went in without any extra harness as it was the same size as the stock, if not you can but harnesses to go where your old stereo did, to connect the speakers you can buy a ford wiring harness from walmart or any store with an audio department. these plug in to your vehicles wiring harness so you don't have to cut it out, after that you simply match colours from the wires of the new cd player to the wiring harness

Dec 25, 2013 | Kenwood DISCONTINUED - KDC-138 In-Dash CD...

1 Answer

I just installed a Kenwood KTV 715 CD/DVD Player and i cant get sound out of the front and rear at the sametime..i switched the settings to all speakers and nothing...help please


all wires are properly coverd right. and u are using the right wireing harness.
and matching the white/black to white/black and white to white. if the wires are all matching
and none are wrong i would take back the cd/dvd player

Sep 26, 2011 | Car Audio & Video

1 Answer

My dodge wire diagram for an 04 dodge ram does not match the wires in the dash color wise. i have power to the kenwood reciver but no speaker output in the truck only subs and amp have sound


wire diagrams for both your truck and any kenwood deck they will all be the same

or you can find the speakrs unmask them turn them over and look at the wires conneted to them then match them up with the wires you need to connect the cd player harness

Jun 19, 2010 | Kenwood KDC-138 FM / AM Receiver

1 Answer

Trying to hook up last few wires and not sure what they are


Hello jtracer,

Here's a link to the Kenwood manual at Crutchfield.

Here's a link to the color code for the 2000 Dodge Durango.

If you are splicing directly into the vehicle wiring, just match up the wires from your Kenwood to the appropriate vehicle wire by function, not color. If you are using an aftermarket vehicle specific wiring harness, such as the Metra 70-1817, the colors should match up with the Kenwood wires.

Hope this helps.

Aug 31, 2009 | Kenwood Excelon KDC-X789 CD Player

Not finding what you are looking for?
Kenwood KDC-135 CD Player Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4807 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...