Question about Foxconn 661MX Motherboard

2 Answers

Motherboard will this board accept pentium4 3.2 478 socket 800 fsb

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Apparently, 661MX will accept the P4 3.2 GHz. I have upgraded from 2.6 to 3.2 GHz. It runs but it restarts itself some times without any sign of warning. I have 2 memory sticks in it, a 1024MB PC3200 400MHz and a 512 MB PC2700 333MHz. What should I do to stabilize it? How do set my board FSB to 800 MHz (specification 800 MHz (overclock) / 533 MHz / 400 MHz)? Any help appreciate.

Posted on Nov 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Hi michlionfan, the following link shows what CPU's your Foxconn 661MX board can handel.
http://www.foxconnchannel.com/Upload/Compatibility/200607120855293005661MXhtm.htm

Link to foxconn 661MX motherboard site.
http://www.foxconnchannel.com/product/Motherboards/detail_spec.aspx?ID=en-us0000114
From this site, look to the left & find the words, Main Page typed in green. Under these two words is, compatibility. Click on it.

Best wishes!
If you need any more help feel free to post here or click the ask me button.

Mike

Posted on Apr 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I put a 2gb DDR2 RAM (1x2GB) to my D915PCY motherboard?


No, you can't. The board accepts DDR2 RAM, but only up to 1GB modules. You can find all the information in the manual here.

Sep 12, 2011 | Intel D915PCY 800MHz FSB DDR2 533 Socket...

1 Answer

Mother board 533 prescoot how the accpet ram and processer


This motherboard supports DDR2-800/667/533 Memory and any socket LGA775 CPU such as Intel Core 2 Quad, Core 2 Extreme, Core 2 Duo, Pentium XE, Pentium D, Pentium 4, and Celeron LGA-775 CPUs

Feb 01, 2011 | Asrock Pentium 4 (LGA 775-pin) -...

1 Answer

I could use a diagram of the mother board for a Pentium 4 2.4 Ghz processor. I picked one up second hand to replace my old processor


If your processor 2.4 Ghz HT you need socket 478 motherboard,System bus 800.without HT you need 533 FSB Motherboard.You can buy easily.Where you live? I do not know.China are available made 478 PIN mother board.

Mar 18, 2010 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

3 Answers

Ax4per with 1.8GHz does not recognize new 2.8GHz processor. Socket 478. BIOS is current. Is it not plug and play?


Hi,

Does it POST and can you get into the BIOS? You need to set the FSB to 133MHz and the Ratio to 21x.

(I am assuming you did install the CPU correctly and installed the fan.)

If you can't get into the BIOS, you may need to reset it using JP14 on the motherboard.

Turn OFF power. Remove the AC power cord. Hold the power button in for 5 to 10 seconds. (This is done to discharge any capacitors.) JP14 normally is on Pins 1 and 2. Place the jumper on Pins 2 and 3 for approx. 10 seconds. Then place it back on pins 1 and 2. Connect the power cord and turn it on. This will set all the BIOS settiings to default and you should be able to set the FSB and Ratio.

Do you have a manual for the MB? you can get it from:

ftp://ftp.aopen.com/pub/manual/mb/ax4per/ax4per-ol-e.pdf

Thanks for using Fixya.

Wayne


Sep 10, 2009 | AOpen AX4PER 845PE P4-533MHz...

2 Answers

Replacement for INTEL Desktop board D865GLC


I've found an Asus P4SD i865GV online:
http://www.geeks.com/details.asp?invtid=ASUS-P4SD-NOAGP-R&cat=MBB

It seems to have the same CPU socket, FSB and RAM types, and the chipset is almost the same model. I'd say this would work.

If you can't get that, just make sure to get a motherboard with the following qualities:

Front side bus (FSB): 800, 533, and 400 MHz
RAM type: Dual Channel DDR 400 MHz (PC3200), 333 MHz (PC2700), and 266 MHz (PC2100).
CPU socket: 478

Aug 07, 2009 | Intel Desktop Board D845BGL Motherboard

1 Answer

I'm having intel 102ggc2 motherboard received as replacement board supports 800fsb i connected dual core, celeron processors of 800 fsb but it is not working


Hi..

Remember that when you are replacing the motherboard, it's batter that you know what is the socket of your motherboard, so that the processor is totally fit to the socket of your motherboard. I think the motherboard you have replace have different to the socket of your processor, that's why your PC will not work.

Good luck !!!

Regards
PCmania

Jul 15, 2009 | Motherboards

1 Answer

I have an Ms-7037 motherboard. I want to change


You cannot change the FSB to 800 , the board is made to take certain FSB's and processors are made with certain fsb speeds (Mainly 533mhz , 800mhz , 1066mhz etc)

These speeds cannot be changed . You have to buy a new processor and a new board to get the faster speed FSB !

If you found this solution useful , please rate below

Kind Regards

1234s282

Jul 02, 2009 | Intel Motherboard

3 Answers

Drivers


driver de audio fsb 800 ddr 400

May 01, 2008 | Asrock 775Dual-880 Pro Motherboard

2 Answers

Processor compatibility- ASUS P5S800-VM


Asus P5S800-VM do NOT support Core 2 Duo: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us&model=P5S800-VM

Oct 03, 2007 | ASUS P5S800-VM Motherboard

Not finding what you are looking for?
Foxconn 661MX Motherboard Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Foxconn Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Are you a Foxconn Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...