Question about D-Link 802.11g Wireless Router WBR-1310 (WBR1310)

1 Answer

Cannot connect d link 1310 to imac

I am trying to connect a new WBR1310 to a system with a intel imac with Leopard and am unsuccessful after following CD instructions.  Any suggestions?  Seems to be nothing specific for mac.

Posted by on

  • Anonymous May 18, 2008

    Same problem. The WBR-1310 connects fine to Intel Mac and G4 Mac, both running Leopard and PCs, but will not connect to my Intel MacBook Pro with Leopard. The Leopard system keeps asking for a password, but the router is not password protected.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 550 Answers

Ignore the cd, temporarily,
try to connect to the router via its web interface at http://192.168.0.1
the wizards and helpscreens on the router if you can reach it are very good
the default admin name is admin password blank
which the wizards ask you to change once you get started.

For guest, check the settings on the macbook,
it may be configured to always ask for password,
a blank password may be valid
it may be configured to login to a domain, which it cannot find

Posted on Jul 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Describe your 802.11g Wireless Router WBR-1310 (WBR1310) Problem I forgot/can't find the password to connect to my wireless device.


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Aug 24, 2011 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

How do I to make a password for the D-Link 802.11g Wireless Router WBR-1310 (WBR1310) ?


  1. Connect via etherne cable or wireless to the D-Link
  2. Open up a Internet Explorer or Firefox, and enter http://192.168.0.1 into the address bar.
  3. The username is "Admin"
  4. The password is blank (enter nothing)
  5. Then click "Setup Wizard" and follow along to change the password.

Mar 01, 2011 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Is my D-link WBR 1310 router compatible with an IMac computer?


hi

yes it's compatible with your MAC Computer

just you have find drivers from D-Link site

Jul 26, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

What is the default password for the WBR 1310 wireless Router?


For the D-Link WR-1310, the following are the default login credentials:
username: admin
password: (none). Just leave it blank.

Dec 19, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I have the WBR1310 D-Link wireless router. I


I would try one or both of the following:

1. Update any drivers or software for the D-Link router.
2. Update the firmware of the router (see page 38 of the user manual for instructions to do this). -- you can download the manual at http://www.dlink.com/products/?tab=3&pid=WBR-1310&rev=WBR-1310 if you dont have it.

Hope this helps.

Oct 06, 2009 | D-Link 802.11g Wireless Router WBR-1310...

2 Answers

D-LINK Wireless G Router WBR-1310


Try changing the channel on your wireless setting or try downgrading your operating system to windows XP.

Jan 02, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Wii wifi connection


Try to uncheck UPnP Enable on your router located on advaced network setting. or try reconfiguring your wireless network settings.

Dec 27, 2008 | D-Link 802.11g Wireless Router WBR-1310...

Not finding what you are looking for?
D-Link 802.11g Wireless Router WBR-1310 (WBR1310) Logo

Related Topics:

450 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

Are you a D-Link Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...