Question about Euro-Pro 8260 Mechanical Sewing Machine

2 Answers

The bobbin thread on sewing machine will not catch

I was hemming pants and the bobin got snagged, cleaned it up and now the thread from needle will not catch on bobbin.

I have a euro-pro 9110 and my thread will not catch the bobbin thread. It was sewing fine then it acted like the needle jammed. I turned the machine off and raised the pressure foot and now it will not pick up the bobbin thread. please help.

Posted by on

  • ohthat Oct 16, 2008

    I had this happen to me last summer. I tried to fix it myself, but it turned out that the timing was off so I had to take it to a repair shop and have them reset the time. It's been working perfectly since then!

  • Anonymous Mar 30, 2014

    the bobbin is catching up and the machine jams

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had this happen to me a few weeks ago. after much research i was able to find a blow up diagram of my machine which allowed me to fine the timing nut and screws and after watching Youtube tutorials on how to time other brands i was able to implement the same techniques to readjust the timing on my machine.


its really just a matter of not being afraid to tear apart your machine.

Posted on Aug 14, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you retime

Posted on Aug 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I stop my tread from popping on my Brother (17 stich) sewing machine?


Breaking thread? Presumably the top thread? AVOID old or bargain bin threads. The upper tension is too tight or the thread is not properly seated in the tension disk, the needle is defective or the needle, needle eye/scarf is not the best choice for the fabric/thread being used, there may be a snag in the bobbin area that is catching the thread. Make sure the thread is not catching on the spool's thread notch.

Why Does My Thread Keep Breaking While Sew

Sewing Machine Problem 1 Thread Breakage

Why is my thread breaking

...

Dec 07, 2016 | Brother Sewing Machines

2 Answers

Why does bobbin thread keep snagging?


increase the needle thread tension up a bit as it is too loose to pull the bobbin thread up properly
keep adjusting until both threads are at the middle of the materials being sewn

Mar 25, 2016 | White Sewing 1418 Mechanical Sewing...

1 Answer

Why will my machine not pick up my bobbin thread?


Bobbin or needle threaded wrongly? Is this a new machine? You need to make the first stitch by hand perhaps. Lower the needle into the needle plate by turning the hand wheel and raise carefully. It should bring up the bobin thread on a loop. catch and pull to back of machine. Now you can sew. I hope.

Dec 20, 2010 | Singer Tiny Tailor TT700

1 Answer

The bobbine thread is not catching and I'm trying to fix it and I am not sure were to start.


start by removing the bobbin, and reinstalling, make sure the thread runs through the bobin tension plate, the little plate that puts pressure on bobbin thread to keep it tight, also look at thread and needle, if thread insn't thread through the needle, it won't catch, feelfree to call me if you need better help, devin 239-895-4845, Quality Auto Trim Inc 239-849-0015

Mar 12, 2010 | Sewing Machines

1 Answer

Needle won't grab thread?


try threading the cotton through the other side of needle.

Oct 16, 2009 | Euro-Pro 7500XH Mechanical Sewing Machine

1 Answer

STITCHES DEEP TO BOBBIN SIDE HAVE CHANGED


You do need an oiling and cleaning. Also, try adjusting on the bobbin cover by turning th little screw with a small screwdriver. Keep adjusting and testing until you get the loops just as you want them...

Aug 05, 2009 | Sewing Machines

1 Answer

Bobbin not picking up through the needle part of the machine


thread only shows the bobbin thread when i sew and needle thread also please e-mail me the attachment instructions. marybellroberts@msn.com

Oct 14, 2008 | Singer 3116 Simple

Not finding what you are looking for?
Euro-Pro 8260 Mechanical Sewing Machine Logo

750 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...