Question about Mr. Coffee 072179228578 12 Cup Coffee Maker

2 Answers

How do i get the delay start to work again after the cleaning cycle?

Posted by on

  • Anonymous May 30, 2008

    I just bought the Mr. Coffee 12-cup maker tonight. I turned it on and set the clock. I decided to run a cleaning cycle and now I can't seem to get the clock to work. Is there a reset button or do I need to return the coffee maker? Thank you for you time.
    Crystal
    cjhudson77@hotmail.com


  • Anonymous May 30, 2008

    I bought the Mr. Coffee 12-cup coffee maker tonight. I turned the coffee maker on and programmed the clock first thing. I decided to run a cleaning cycle afterwards and now I can't seem to get the clock to work. Do I need to return the coffee maker or is there something I can do to fix it?
    Thank you for your time,
    Crystal


×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,554 Answers

Http://www.mrcoffee.com/InstructionManuals.aspx

Posted on Apr 17, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do i clean my Mr Coffee it wont let me set the delay brew

Posted on Dec 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My delay light has come on and I cant get the dishwasher to start. The delay light goes out after the time has expired but if you try to move it to the start position the light comes on again


The Control is programmed to stop running and not allow any further cycles if it detects a water heating problem (no temperature increase detected in heated Main Wash on 3 consecutive cycles). The Control will flash the Clean LED 7 times repeatedly and will disable the Start/Resume key until cleared.

To clear and reset the control press in this order: Heated Dry ? Normal ? Heated Dry ? Normal and then let the unit run for 1-2 minutes and then press Cancel and let the dishwasher complete the cancel cycle. The dishwasher should operate normally again unless it does not detect a temperature rise in the main wash cycle.

It could be caused by a Heater circuit problem if it continues to stop and flash the Clean light.

It could have one of the following failures:
Open in heater.
Open connection or component in heater circuit.
Faulty heater drive circuit on control.
It can also be caused by the wash pump not pumping water past the heater efficiently.

Oct 11, 2016 | Kenmore Dishwashers

2 Answers

Need self-cleaning instructions....missing manual.


To Self-Clean: 1. Close the oven door. 2. Move the door lock lever to the right to the locked position. 3. Press CLEAN. 4. Press the "up" or "down" arrow pad. CL-M (Clean - Medium soil, 3 hours) appears in the display. If the door is not closed, beeps will sound and "door" will appear in the display until the door is closed and the Clean pad is pressed again. If the door is not closed within 45 seconds, the self-cleaning operation will be canceled and the display will return to the time of day. If more than 5 seconds elapse between pressing the Clean pad and the "up" or "down" arrow pad, the program will automatically return to the previous display
5. To choose a clean setting other then Medium, press the "up" or "down" arrow pads to scroll through the self-cleaning settings. CL-H (Clean - Heavy soil, 4 hours) CL-M (Clean - Medium soil, 3 hours) CL-L (Clean - Light soil, 2 hours) Choosing a cleaning level automatically programs the selfcleaning time. 6. After 4 seconds, the oven will start cleaning. "LOCK" and "CLEAN" will appear in the display. The cleaning time will count down in the display. To Delay Start Self-Clean: Before delay starting Self-Clean, make sure the door is closed completely or it will not lock and the cycle will not begin. 1. Press DELAY. "DELAY" will flash and "00:00" will appear in the display. 2. Press the "up" or "down" arrow pads to enter the amount of time you want to delay the cycle. Delay time can be set from 10 minutes (00:10) to 11 hours and 59 minutes (11:59). 3. While "DELAY" is flashing, press the CLEAN pad. "CLEAN" will flash in the display. 4. Press the "up" or "down" arrow pad. CL-M (Clean - Medium soil, 3 hours) appears in the display. 5. To choose a clean setting other then Medium, press the "up" or "down" arrow pads to scroll through the self-cleaning settings. CL-H (Clean - Heavy soil, 4 hours) CL-M (Clean - Medium soil, 3 hours) CL-L (Clean - Light soil, 2 hours) Choosing a cleaning level automatically programs the selfcleaning time. After 4 seconds, "CLEAN," "DELAY," and "LOCK" will appear in the display to show that the oven is set for a delayed clean operation. The delay time is displayed

Apr 21, 2015 | Kitchen Ranges

1 Answer

How to self clean...no owner manual


Before cleaning, remove the racks and other items in the oven. Clean the oven frame and door frame outside of the gasket with a nonabrasive cleanser like Bon Ami. Wipe up any excess grease or sugary and acidic spills by hand. Turn off the oven light. Ventilate the kitchen well.

Then press the Clean pad once for immediate start. Press Auto Start to increase the cleaning cycle to three hours. Press a second time to get a 4 hour cleaning cycle or three times to return to the two hour cycle. Cleaning and LOC plus the cleaning cycle time will be displayed on the oven. After the cleaning cycle is complete, the Cleaning will no longer be displayed. However, the LOC will remain on until the oven cools down (approximately one hour). You will not be able to open the oven until the LOC message disappears.

Press the Clean Pad twice for a delayed start. Then use the Auto Start button to determine the delay for the cleaning cycle. The rest of the steps will remain the same.

The manual is available from the following site: http://shared.whirlpoolcorp.com/product_literature/search_results.jsp?searchTerm=JES9800A&siteCd=JA_EN_US&userType=Consumer .

I hope this helps.

Cindy Wells
(these directions are from the JES9800AAW unit; the above site has the manual for this and the JES9800ACW.)

Jan 09, 2011 | Jenn-Air JES9800A Electric Kitchen Range

1 Answer

The delay start light on my washer is on and I do not want to delay start. I have pushed the cancel button twice like instructions say and once I hit start, the delay start light is on and machine is...


First I made sure the detergent dispenser door was closed. That did not work. Then i made sure that the dispenser was clean, by running water thru it. That did not work,. Then I turned the dial to hand wash and pushed the start button. That worked. Delay light did not turn on. Then i turned the setting to the proper wash cycle and pushed the start button. Clothes are being washed now.

Nov 23, 2010 | Frigidaire FTF2140FS Front Load Washer /...

1 Answer

The dishwasher will start to cycle. I can hear the water begin to run. I hear a click and at the time the dishwasher should start to run the cleaning cycle. During the cleaning cycle the dishwasher will...


This is probably okay, you have clock like motions running the motor electric contacts. There needs to be a delay between some cycles or shorting will occur. The motor on some designs, for example. is reversed to pump out water. to have this work long term, a delay is inherent and not a concern.

Sep 17, 2010 | Viking 24 in. Professional Series VUD040...

1 Answer

Electrolux dishwasher delays before starting


  1. To cancel the delay.press the delay pad again when the delay is counting down. The indicator light will go out and the cycle will start or resume immediately.
  2. To cancel the delay and the cycle, press Start/cancel once to drain and turn-off the dishwasher.
  3. Press Start/cancel twice to turn-off the dishwasher without draining.

Aug 31, 2009 | Electrolux EDW5505ESS Built-in Dishwasher

1 Answer

I need direction on how to start the clean cycle on my jenn air


CLEAN PAD
Use to set a self-clean cycle or a delayed
self-clean cycle. One press of the Clean
pad sets up an immediate clean cycle. A
second press of the Clean pad sets up a
delayed clean cycle.
• Clean oven
frame, door
frame (area
outside of gasket)
and
around the
opening in the door gasket with a nonabrasive
cleaner such as Bon Ami*. These
areas are not exposed to cleaning temperatures.
• Remove air grille.
• Remove oven racks. If racks are left in
during a clean cycle, it may impair function
and they will discolor. Turn off the
oven light and close door.
* Brand names for cleaning products are
registered trademarks of the respective
manufacturers.
TO SET FOR IMMEDIATE START:
1. Press Clean pad once.
2. Press the Auto Set pad for 3 hours of
cleaning time, press again for 4 hours
and again if 2 hours of clean time are
desired.
3. CLEANING and LOC plus the clean
time will appear in the display.
4. When the clean cycle is complete,
CLEANED will be displayed. LOC will
remain on until the oven has cooled
(approx. 1 hour).
5. When the oven is cool, LOC will no
longer be displayed and the door may be
opened.
6. Wipe out the oven interior with a damp
cloth. If soil remains it indicates the
cycle was not long enough.

TO CANCEL SELF-CLEAN:
1. Press Cancel pad.
2. If LOC is NOT displayed, open oven
door. If LOC is displayed, allow oven to
cool.

Thanks for using Fix Ya, Please take the time to rate this solution.

clarkco

Feb 08, 2009 | Jenn-Air JDS9860A Dual Fuel (Electric and...

2 Answers

My SHU53 only starts on 2Hr Delay and water is not getting hot


Bosch dishwashers run the heating element directly from the control module, which usually causes the solder joint to go bad.....solution, replace the control module, or take the old one out, and repair solder joint

Dec 27, 2008 | Bosch 24 in. SHU53 Built-in Dishwasher

2 Answers

I need to cancel a washing cycle in the middle of the cycle.


usually pressing PAUSE/CANCEL twice cancels the cycle and shuts it off allowing you to then re-start the cycle. If not try unplugging it and see if it resets to allow you to start cycle again.

Dec 07, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

My maytag Jet Clean EQ Plus seems to be stuck on the three minute delay


Hi 9897,

I'm Harvey the Master Plumber.

Your problem is: The red light for the three minute delay is staying on and you can't get a cycle to start

First try to reset the d/w. Turn off the power at the circuit breakers for ten minutes. This useually solves the problem. If not, you're likely looking at a bad control board.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

Sep 27, 2008 | Maytag 24 in. MDB7600A Jetclean® II...

Not finding what you are looking for?
Mr. Coffee 072179228578 12 Cup Coffee Maker Logo

630 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mr. Coffee Coffee Makers & Espresso Machines Experts

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Cindy Wells

Level 3 Expert

5186 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Mr. Coffee Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...