Question about Flat Panel Televisions
I just bought a Curtis mathis Big Screen TV. It is a really old one (1991), but it was working fine, except it was a little dark, so I went into the menu to brighten it, and now I can't get it back to the regular TV. It is on video. I hooked my cam corder up to it and it shows the movie fine, i just can't get it back to TV. Thank you Judy
I don't know this set in particular. Try pressing a channel number on the remote and see if it takes back to the tuner.
Posted on Apr 17, 2008
Tips for a great answer:
May 28, 2016 | Curtis LCD3227A 32-inch LCD TV
Jan 11, 2015 | Curtis LCD2425A TV
Dec 31, 2014 | Proscan 50" LCD HDTV PLCD5092A - CURTIS...
Aug 31, 2011 | Curtis LCD2424A 24 in. LCD HDTV
Apr 12, 2011 | Curtis Flat Panel Televisions
Mar 04, 2011 | Curtis LCDVD2223AC 22 in. TV
This only takes about a minute and will restart 1 in 3 "Dead" Original Remote Controls.
Step 1- Pull the batteries out of the remote and leave them out until Step 4.
Step 2- Press and release each and every button one at a time on the remote control until every button has been pressed and released at least once!
Step 3- If your remote has slide switches, you must move the switch to
each position then repeat the button pushing in Step 2.
(When you're done, be sure to put the slide switch in the correct position to operate the unit the remote came with!)
Step 4- Put the batteries back into the remote, being very careful to install them correctly.
New batteries should be used if you're not sure about the old ones.
Step 5- Try the remote.
If you have a digital camera, camcorder or camera phone you can test the remote to see if it is emitting a signal. Face the remote towards the lens of the digital unit until you can see the front of the remote. Depress any button on the remote. You should see a light (steady, blink or flashing) being emitted from the remote.
If you do then the problem might not be the remote but the sensor on the set.
Feb 28, 2011 | Flat Panel Televisions
Jan 03, 2011 | Flat Panel Televisions
Dec 04, 2010 | Flat Panel Televisions
62 people viewed this question
Usually answered in minutes!