Question about 2wire 1000-200004-000 Network Adapter

4 Answers

2Wire USB Remote NDIS Ethernet driver

When I restart my computer I get a found new hardware message. Asking to download the driver for the 2Wire USB Remote NDIS Ethernet, or put in the installation disc. Do not have the disc anymore please help me to find the driver I need. I have 1800HG 2Wire modem.

Posted by on

  • 11 more comments 
  • Anonymous Aug 07, 2008

    0 (2Wire USB Remote NDIS Ethernet)

  • Anonymous Aug 23, 2008

    I undated my windows op system to vista from xp and now I need a new driver for my 2 wire USB remote NDIS ethernet

  • Anonymous Sep 18, 2008

    2wire.com dosn't have the driver available ??

  • Anonymous Sep 30, 2008

    necesito driver

  • Anonymous Oct 01, 2008

    thanks



  • Anonymous Oct 05, 2008

    i have the same problem...

    could you please help me?

  • Anonymous Oct 07, 2008

    i have a new comp with vista micro cant get on line asking for 2wire usb remote ndis ethernet please help not very good with computers . plain english please for beginner

  • Anonymous Nov 05, 2008

    I lost the disc too

  • vballdad Nov 29, 2008

    When I restart my computer I get a found new hardware message. Asking
    to download the driver for the 2Wire USB Remote NDIS Ethernet, or put
    in the installation disc. Do not have the disc anymore please help me
    to find the driver I need. I have 1000HW 2Wire modem. It seems that I cannot properly sync my Palm Pilot until this is performed. Could that be true?

  • Anonymous Dec 03, 2008

    hgfhggh

  • ali_jamali_2 Dec 05, 2008

    I have the same problem

    if anyone fidn the solution please send me by email ali_jamali_2003@yahoo.com

  • Ezeikel Newton
    Ezeikel Newton Dec 10, 2008

    My comouter asking me to download it but I don't have thr disc

  • dusty33 May 11, 2010

    i need to know what to do with this problem

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

When I restart my computer I get a found new hardware message. Asking to download the driver for the 2Wire USB Remote NDIS Ethernet, or put in the installation disc. Do not have the disc anymore please help me to find the driver I need. I have 1000HW 2Wire modem. It seems that until I make this change, I cannot properly sync my Palm Pilot. Could that be true?

Posted on Nov 29, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 104 Answers

You have to visit the manufacture web site and in that some driver download option will be there. You can download it. Or give the name of the product get you the link. Go google search or any search engine for driver with model no and name of manufacturer

Posted on Apr 17, 2008

You can get a driver at this site, and then either copy the .sys file to C:/WINDOWS/system32 or use "Install from a specific location (advanced)" from the Found New Hardware wizard and select the location you extracted the drivers from.

Posted on Aug 14, 2008

I faced this same problem today, when I gave my dad my old computer (to replace his old computer). I connected my ethernet card to the 2wire's ethernet input, and problem solved.

Posted on Jun 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The network adapter Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (NDIS 6.0) is experiencing driver or hardware related issues


Hi there,

If you are able to get on the Internet, you'll want to download the latest drivers. (See below). If you can't get on the Internet, you'll need to find a computer that can, then download the drivers to a disc or small flash drive.
You can get the latest drivers for your Network Card here: http://download.cnet.com/Realtek-RTL8168-8111-PCI-E-Gigabit-Ethernet-NIC/3000-2112_4-99235.html

Feb 23, 2011 | Dell Network & Wireless Adapters

1 Answer

I need help hooking up my DSL. First time and have 2Wire remote NDIS Ethernet modem. Plugged in, detected, need driver! Please help? Laura


hi Laura, below is the link for the drivers you are looking for, hope this helps :-)
http://support.2wire.com/index.php?page=download

let me know if you have any questions
regards

Amar Sondhi

Dec 08, 2009 | 2wire 1000-200004-000 Network Adapter

1 Answer

Panasonic Toughbook CF-29H and CF-30D Remote NDIS reinitialization.


HI buddy its simply bcuz you need to download a suitable USB drive.
Here are some websites from where you can download those drivers for free!!!!
brothersoft.com
bitcomet.com
cnet.com
thank you for giving me an opportunity to help you out:)
Plz rate me so that I can improve myself and be more helpful:)
Prasanth83:):):)

Jun 01, 2009 | 2wire 1000-200004-000 Network Adapter

1 Answer

When I try to download 2wire USB Remote NDIS Etherent. My computer saying that I need the dic


Dear Zeike,
you can download the driver from this site:
http://www.drivers-software-download.org/tag/2wire-usb-remote-ndis-ethernet-driver

And for installation instructions ,please download this file:
www.2wire.com/pages/pdfs/5100.000228.000.Rev.B.pdf

Be Happy Always
Regards

Dec 10, 2008 | 2wire 1000-200004-000 Network Adapter

1 Answer

I need help installing my 2wire wireless adapter card.


I used this one:

Introduction
============
This document describes the procedure to install driver for the 2Wire Wireless USB Adapter under Microsoft Windows, and to run a wireless configuration program to configure your 2Wire Wireless USB Adapter to work with a 2Wire HomePortal or OfficePortal wireless gateway. These drivers work under Microsoft Windows 98SE, ME, 2000, and XP.

STEP 1 - Driver Installation
============================
1. Make sure your 2Wire Wireless USB Adapter has not been connected to your computer USB port.
2. Double-click on the file to run WinZip Self-Extractor. The driver installation files will be placed in your hard disk in the C:\TWWUSB_TEMP directory
3. Connect your 2Wire Wireless USB Adapter to an available USB port in your computer. Windows Found New Hardware Wizard will startup.
4. Select the option to search for driver in specific location. Specify C:\TWWGUSB_TEMP as the location of driver.
5. Follow on-screen instruction to finish driver installation.

STEP 2 - Wireless Configuration
===============================
1. Run the program WirelessCfg.exe in the directory C:\TWWGUSB_TEMP. You can do so by clicking on the Windows Start button and select Run. The Windows Start button is typically at the lower left corner of the screen. Type in C:\TWWGUSB_TEMP\WirelessCfg.exe to launch the program.
2. Follow on-screen instruction to configure your wireless setting. Enter the serial number and encryption key as they are printed on the bottom of your 2Wire wireless gateway.

Sep 28, 2008 | 2wire (1000-100052-000) 802.11g/b Wireless...

2 Answers

I am having a problem with 2wire diver


I had to reload my computer and I don't have the install CD for my wireless 2wire. Where can I get the info to reinstall data?

Jun 15, 2008 | 2wire Network & Wireless Adapters

2 Answers

Computer recognizes the card, but configuration utility does not?


Hi

Install the compactable drivers,You can find all the drivers and the manual for your Wireless Adapter here: http://www.2wire.com/?p=331

May 28, 2008 | 2wire (1000-000005-002) 802.11g/b Wireless...

Not finding what you are looking for?
2wire 1000-200004-000 Network Adapter Logo

44,137 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Network & Wireless Adapters Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Ray Smith

Level 2 Expert

124 Answers

Are you a 2wire Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...