Question about 2wire 1800HG Router (RG1800HG00)

8 Answers

2Wire USB Remote NDIS Ethernet driver

When I restart my computer I get a found new hardware message. Asking to download the driver for the 2Wire USB Remote NDIS Ethernet, or put in the installation disc. Do not have the disc anymore please help me to find the driver I need. I have 1800HG 2Wire modem.

Posted by on

  • 9 more comments 
  • judsweetpcs Apr 16, 2008

    thanks it worked

  • Abker Jun 20, 2008

    bt businwe hub

  • theladybu Jul 15, 2008

    When I restart my computer I get a found new hardware message. Asking to download the driver for the 2Wire USB Remote NDIS Ethernet, or put in the installation disc. Do not have the disc anymore please help me to find the driver I need. I have 1800HG 2Wire modem. Thanks...

  • elcihualteco Aug 07, 2008

    0 (2Wire USB Remote NDIS Ethernet)

  • will55 Aug 19, 2008

    My system is asking for adriver for 2Wire USB Remote NDIS Ethernet. I don't know enough to know who is the manufacturer and where to find it. I have even purchased driver finders and they found nothing for this.

  • Anonymous Sep 20, 2008

    no disc for drivers

  • j_heyes Oct 26, 2008

    2Wire USB Remote NDIS Ethernet driver problem. i have got a new computor with vist home premium and i cant work my scanner because the driver is for xp

  • shanehubbard Nov 13, 2008

    i have the same problem lost installation disc for 2wire

  • Anonymous Dec 02, 2008

    get need disc

  • Mary5719 Jan 04, 2009

    I have the same problem

  • Anonymous Jan 22, 2009

    2Wire USB Remote NDIS Ethernet driver

×

8 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

The drivers are located on the 2wire website. You need to go to support > downloads > Gateways > 100/1000. Those drivers will work for any 2wire gateway that has USB.

Posted on Dec 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,342 Answers

There's only one driver listed at the bottom of the page.

Posted on Apr 16, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am using Windows 7 and the driver has some compatibility issues any ideas??

Posted on Mar 07, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

With the driver guide I have solved my problem
Tnk you

Posted on Feb 06, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have a 2wire 1800HG Router and want to set up wireless 2wire on another in my offiece at the other end of the house. Wie no longer have the disc to download the setup. Is there any other way to do this without having the disc? Thanks JJ at mailejohnson@sbcglobal.net

Posted on Nov 03, 2008

Thanks. it works for me too.

Posted on Jul 11, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Wnat to know how can i get this driver...please send me the response to my mail direction endless_fenix@hotmail.com

Posted on Sep 20, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Www.driverguide.com has drivers for 2wire equipment

Posted on Sep 07, 2008

3 Suggested Answers

  • 13433 Answers

SOURCE: 2Wire USB Remote NDIS Ethernet driver

I will look for the driver.

Posted on Jul 10, 2008

myob247
  • 1342 Answers

SOURCE: Connected directly to my 2wire modem

You can download the driver HERE. The file is in zip format and will need to be extracted to a folder.

Click Here for instructions on how to access setup.

Posted on Jul 15, 2008

scrodamoon
  • 659 Answers

SOURCE: 2Wire USB Remote NDIS Ethernet driver

I uploaded the drivers to my server for you hope it helps!

http://www.files.hpifdesigns.com/drivers/BT1800HG_Drivers.zip

Posted on Aug 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to identify hardware.


Here is description of the unit , the installation guide and the user guide:

HomePortal 1000HW Router/Modem with Firewall & 1 Ethernet port, highpowered 400mw 802.11b wireless, USB, and HPNA.
2Wire HomePortal gateways include an array of the most common home networking technologies accommodating a variety of service provider and subscriber environments. Flexible networking options include high-powered 802.11g wireless, Ethernet, HomePNAv3, MoCA, and USB.

http://www.2wire.com/pages/pdfs/1000_series_Gateway_Install_Guide.pdf


http://www.2wire.com/pages/pdfs/2Wire_1000_User_Guide.pdf


Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Mar 30, 2009 | 2wire HomePortal 1000HW DSL Modem and...

1 Answer

Can't re-install 2Wire USB Wireless adapter


If you are on windows vista it could be your driver. You can go into safe mode on the computer with F8 while the computer is starting up, then go to the control panel and device manager. Plug the adapter in and remove the driver for it. Download a new driver at http://support.2wire.com/index.php?page=download and install it.

Mar 30, 2009 | 2wire HomePortal 100W (1000-400026-000)...

1 Answer

Zhone 6211 no driver usb for WinXp, only for Vista and Windows 7.


Please ensure that your PC is updated to accept/connect to USB devices in your (O/S).

Download your USB DSL modem driver at this link: http://www.zhone.com/support/downloads/drivers/

You have to check your modem specs though. It looks like this:
ADSL+, 6211-I2, Bridge/Router. etc.

After you download it, install the driver (plug out the modem and plug it in back. The USB detection will initiate, and ask for driver. Use the downloaded driver and
it will say NDIS Remote Driver..... THIS IS FINE. You may have to go to network in control panel and make your fine tuning as you require (setup lan icon, firewall, etc). Thats it !

PS. Yes it does work. I just installed it about an hour ago, USB and all, WindowsXP 64 bit !

Mar 18, 2009 | Routers

1 Answer

1800 hg 2 wire wireless


1.can i use my 2wire 1800hg with vista?hooked up to ethernet connection.- yes its possible make sure you enable dhcp on your lan side of you router and under tcp/ip on your pc set it to authomatic assign IP address and dns server address. most router use 192.168.1.1 as thier default address to access it.

to fix your passkey problem.need to access the router and try to change the passkey then save and don't forget to restart the router after you save it,by unplugging it. "make sure your passkey is 8 characters long"


Nov 11, 2008 | 2wire 1800HG Router (RG1800HG00)

1 Answer

Connected directly to my 2wire modem


You can download the driver HERE. The file is in zip format and will need to be extracted to a folder.

Click Here for instructions on how to access setup.

Jul 15, 2008 | 2wire 1800HG Router (RG1800HG00)

2 Answers

Win98, Linksys USB Adapter, 2wire router... no internet


hi!
sorry if it took a while to get an answer to your question...

anyway, let's begin by ensuring that you have completed installing the drivers & software of your wireless adapter.

launch the linksys wireless program by clicking on the icon for the linksys on the system tray or generally, this can also be launched from the programs menu after clicking on the windows start button.

on the main screen for the linksys, there are 3 tabs: link information, site survey & profiles. select the profiles tab

on the profiles screen, click on the new button to create a new profile. name the profile with a customized ID & click ok.

under choose a net type, select infrastructure mode. enter the SSID (this is your customized ID created on the new profile) & click next.

under network setting select obtain an IP address automatically (DHCP) & click on next.

under security settings choose "disabled" for WEP and leave the rest of the fields blank.

confirm the settings by clicking on yes.

note: you don't need a driver for your 2wire router, ensuring that the 2wire is already working with the ethernet connection.
also make sure you are able to see your devices on the mdc page, go to homeportal/management, local network> device list.

i assume that the mac g4 is able to connect wirelessly to this 2wire modem, am i correct?

please let me know if you have any issues... we'll work this one out, ok?

Apr 16, 2008 | 2wire (1000-400108-001) Router

1 Answer

Homeportal 1100


If you connect with an ethernet cable, you don't need any additional drivers at all. You just need to have a browser connected to »192.168.1.254/ and a product key. The 2Wire has a built-in wizard which you can access with the browser, and it will guide you through the setup. The product key is obtainable from a number of sources, including the 2wire web site, although you should look to your ISP's web pages first if they provided the 2Wire.

If you don't have an ethernet adapter on your computer, you might want to consider purchasing one of those inexpensive ethernet cards. Ethernet seems to have a lot fewer problems than the USB route.

Jan 05, 2008 | 2wire (1000-400108-001) Router

Not finding what you are looking for?
2wire 1800HG Router (RG1800HG00) Logo

Related Topics:

18,152 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Routers Experts

Bob S

Level 1 Expert

15 Answers

Justin
Justin

Level 3 Expert

2072 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a 2wire Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...