Question about Vacuums

1 Answer

Need to get access to the belt on my Eureka model 4475

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 310 Answers

Eureka Model #4475
need to get access to the belt on my Eureka model 4475

I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
There may be 2 different ways to get to the belt, I checked the Eureka website and I believe you have to remove the bottom plate and the brushroll and belt are exposed and you would hook the belt on the brushroll 1st and then use a screwdriver with a bent hook and then you can pull the belt onto the pulley, once the belt is on the pulley then you can track the belt by rolling it on the brushroll & belt pulley --- the other way is that there are 2 screws on the bottom of the of the vacuum – remove the screws and then the top cover should lift off the vacuum to expose the belt – then follow the same procedure ads listed above. Check with you local vacuum dealer in your area in the yellow pages or use the Eureka website or customer service phone number listed below:
http://www.eureka.com Customer Service Phone Number
1-800-282-2886 Hours of Operation
Monday thru Friday 8:00 am to 7:30 pm CST
Saturday and Sunday 10:00 am to 6:30 pm CST

Posted on Apr 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Eureka as1100 roller brush not spinning. We have already replaced the main belt but there is a secondary belt that drives the roller brush and we can't figure out how to access this belt.


Sorry folks, but there's no Eureka with this model no. The model number can be found on a sticker, usually on the bottom of the unit. We'll need the correct model to access schematics of the body so I can tell you how to access the belts.

Nov 03, 2013 | Vacuums

2 Answers

Need belt for Eureka vaccum The Boss model 5848 AV-2. Can you give me a belt number for what i nee. Thanks.


The belt part number for the Eureka 5848 AV-2 vacuum is 61120A.

Should you need part numbers for other pieces of the Eureka 5848 AV-2 vacuum, click on the following site, http://www.vacpartswarehouse.com/Eureka-5848-Lightspeed-Whirlwind-s/1959.htm

Mar 14, 2011 | Eureka 5849A Boss Bagless Upright Cyclonic...

1 Answer

Type of belt for it?


Hello,

Your Eureka Whirlwind model 4489 uses the Eureka Style U belt. There are several different U belts that Eureka makes, including a generic one that's made by Eureka under the Smart Choice name. Eureka also makes a Eureka Style U belt Extended Life, apparently increase the life of your Belt.

Here are links to all of the Eureka U belts that will fit your model:

Generic Eureka U Belt made by Eureka for Smart Choice Brand


Standard Eureka U Belt Part 54312

Extended Life Eureka U Belt Part 61120

If you have any questions, or need help installing this belt, please just reply using the comment section on the repair page here on Fixya, and I'll be more then happy to answer any follow up questions that you may have.

If you found this helpful, please be so kind and rate the repair, or leave feedback for me, this is greatly appreciated by the Fixya community.

Thanks,

Chris Jones
GoVacuum.com

May 17, 2010 | Eureka Whirlwind 4489 Upright Vacuum

1 Answer

The belt broke on my vacuum, how do i change it. the vacuum is a eureka model number 3041


Remove the base plate. It is held with screws accessible from under the unit.

Inside you will see the beater bar and the belt.
Remove the beater bar. This is self explanatory once you see inside the power head.
Remove the old belt.

Find a replacement from your local dealer or online.

Replacement is the reverse of removal.

This is a simple job you only need a screwdriver.

Good luck, please rate this answer. Thanks.

Mar 27, 2010 | Eureka Altima Upright Vacuum Model 2996AVS...

1 Answer

What Model replacement belt do I need for the Eureka model 2961 BVZ?


Greetings,

According to the Eureka Part diagram for your particular model vacuum, your vacuum uses Eureka Style U Belts. Eureka makes actually 2 different styles of U belts.

The first style is the standard U belt, Eureka part number 54312. This belt is probably the one that came standard on your model. You may purchase this belt from the link below;
http://eurekaservice.stores.yahoo.net/uprightbelt.html

The other type of Style U belt that will fit your model is the Eureka Extended Life Style U Belt, Part 61120B. The Extended U belt is more durable, and lasts longer then the Eureka Standard U belt. You may purchase the Extended U belt here;
http://eurekaservice.stores.yahoo.net/exlifubel.html

Now, if you are quite sure how to change your belt, you may visit the link below to see the owners manual for your Eureka 2961BVZ that will give you step by step instructions on how to change the belt;

http://eureka.com/service/manuals/80244.pdf

I really hope that this was helpful to you in finding and fixing the belt for your Eureka. If you did find this helpful, please be kind and rate my repair solution as helpful by clicking the thumbs up icon in the lower right hand corner below. I really do appreciate it, thank you.

Feel free to request a repair clarification if you have any questions about the procedure of installing the belt on your Eureka, I'll be happy to help.

Chris J.

Mar 12, 2010 | Eureka 2961AVZ Bagless Upright Vacuum

1 Answer

How do you change the belt on a model 5856


here is a link to the manual which has instructions and to the belts you need

Eureka 5856 Belts

Eureka 5856 Owner's Guide

Nov 22, 2009 | Vacuums

1 Answer

My eureka


The belt may look ok, but am sure it is stretched and when this happens, the brush roll won't turn like it should. Did you check the brush roll ends to see if they turn freely, if not replace it.

Mar 10, 2008 | Vacuums

Not finding what you are looking for?
Vacuums Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...