Question about JVC KD-LH7R CD Player

1 Answer

Rockford Fosgate deck: RFX-9000

My deck can eject and receive a cd. But when i attach my face unit, it doesn't seem to get any power, cause nothing lighting up on the display. and it won't play at all. I've tried the reset button, but that didn't do squat.

help a native out. :)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 39 Answers

You could have a power problem here.
Makre sure you still have 12v on both the yellow and red wire in the loom.

Posted on Jul 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cd mixer deck repeatedly ejecting cd


It may be a mechanical or optical detection of the disc being inserted.
The unit need to be seen by a Technician to determine what is wrong with the unit. Lens cleaning is not the first action I would take to resolve this.

Dec 05, 2012 | Audio Players & Recorders

2 Answers

JVC KD -S680 needs help


maybe short circuit or similiar problem inside since its geting hot, probably not a problem with the faceplate I would remove the cd player from your car and take it to a professional for a diagnosis / repair estimate. Can't solve this one with text only.

Jun 18, 2008 | JVC KD-S680 CD Player

1 Answer

There is no display on the faceplate. The faceplate is stuck in the CD eject position. If I remove the faceplate the mechanism rotates to the position where the controls would be visible but when I attach...


I would try cleaning the connectors on the face plate with an pencil eraser and on the unit itself with a very fine sand paper. And make sure you get rid of any dust after cleaning before putting the face plate back on.
Please leave me a good feedback.
Thanks

Jan 06, 2011 | Kenwood KDC-8021 CD Player

1 Answer

I have a CDX-M8815X unit only works with remote commander


The problem is the ribbon cable,the one connects the face to the main board,if you live in USA you can order it from pacparts.com or sony.com.
For replace it you will need to open the unit and open the face by moving manually the gears,then remove the side screws of the face and remove face,then remove the cd mech. you will see the ribbon connector.Just replaced and put everthing back togheter.
Good luck

Nov 30, 2008 | Sony CDX-M8815X CD/Receiver/MP3 System

3 Answers

Error Message AO


I had the same issue, my battery was died due to headlight was ON and later player was showing AO. I am going to reset the unit and see if it will solve my problem.

Mar 09, 2008 | Pioneer DEH-1900MP CD Player

2 Answers

Dual MXD55 W/6/5 SP CD Problems


make sure the speaker grounds are connected to the speaker ground wires on the deck and not the "chassis" ground. also make sure both power wires are hooked up to a power source. the thinner power wire is supposed to be a switched source (like the ignition key or an accessory switch) that turns the unit on and the thicker one is a constant source which actually powers the deck once the switched source is turned on.

Jul 01, 2007 | Dual MXD55 AM/FM/CD/Weather Receiver

2 Answers

KDC-MP919 No display


You probably have a break in the flexible ribbon cable that goes between the flip face and the mother board. Try partstore.com for a replacement cable.

May 24, 2007 | Kenwood KDC-MP919 CD Player

1 Answer

Cdx-mp40


You are correct, the unit powers entirely from the red and yellow leads. Your symptoms sound like a unit that isn't getting power on the red (switched) lead. The most likely cause is a blown fuse in your vehicle's fuse box.

Mar 13, 2007 | Sony CDX-MP40 CD Player

6 Answers

Sony CDX M8800 Front Panel Problem


u need 2 replace the ribbon that goes to the panel to the unit.i had the same problem with mine then i went on to ebay and found the ribbon there (cdx-m8800 repair kit)hope this helps

Dec 17, 2006 | Sony CDX-M8800 CD Player

1 Answer

JVC KD -S680 needs help


all radios like your has two power inlets one is battery and the other is Acc or Ing. The battery line keeps power in the radio after you turn off your car both lines must work for the radio to turn on it sounds like a resister burn out thats why your face plate was warm.

Sep 25, 2006 | JVC KD-S680 CD Player

Not finding what you are looking for?
JVC KD-LH7R CD Player Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

kakima

Level 3 Expert

102366 Answers

xxxxxx xxx

Level 3 Expert

4823 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...