Question about Projection Televisions

1 Answer

I have an Olevia 323-s11 LCD. After my son played around with the remote I can no longer access aspect, sleep, return and many of the extra buttons. He doesn't remember what he did. Can you help? Also, can't seem to set this TV up with a universal remote. My husband thinks the volume at it's lowest level is too high and I was hoping that would solve that problem. Thank You

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have that problem too

Posted on Aug 08, 2010

  • ryncrispen Aug 08, 2010

    Why are the menu settings that I changed not being saved? A. The TV is in Showroom mode. The following steps will help you switch to Home mode.

    1.Press Menu button from the remote,
    2.Press Down arrow key until you see the word Picture, then press the Right arrow key,
    3.Press Down arrow key until you see Mode, then press the Right arrow key,
    4.Press Down arrow key until you see Power Up, then press the Right arrow key,
    5.Press Down arrow key until you see Home, then press the Enter key,
    6.Press Menu button four times to exit out from the OSD Menu

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Element tv is stuck on zoom mode


If no aspect button on original remote you may be out of luck.

If using the set with a box might want to unplug box and set to see if that helps--some boxes also have a aspect setting accessed with the box remote.

I would first see if same issue when going directly to any rear audio and video input, might narrow down where the problem is or is not.

Dec 17, 2012 | Sony Grand WEGA KF-50WE620 Television

1 Answer

Returning to "streched" picture as top of heads


Remote control is needed to change aspect ratio. The button on the remote is labeled format. Standard definition sources have six picture sizes and HD has two.

Bill W
integrityhomeworx.com

Mar 13, 2011 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

Edges of picture being cut off. Is there something we can do to adjust it?


Have you tried changing the aspect ratio? On your remote there should be a button labled aspect. Otherwise you'll need to access the service menu and change the vertical height and horizontal width.

Jul 16, 2010 | Hitachi 57F710 TV

2 Answers

My 51f59 tv is zoomed in too close to see the all of the bottom


look for a button on remote called format , aspect or picture size and press it till the picture fits the screen

Feb 04, 2010 | Hitachi 51F59 51" HDTV Projection...

1 Answer

My sis gave me an old samsung tv. It is just for my son and his x-box. Unfortunately there is no remote control. When switched on it is saying PANEL LOCK. Is there any way i can fix this. Model No TI-14N3....


hello you could try this The front panel of the COMBI VISION can be locked to prevent it
from being used by young children for example.
1 To lock the front panel, display the television menu by pressing MENU
( ).
2 Select the SETUP option by pressing the P ▲ or ▼ buttons the required
number of times.
3 Press the + button.
4 Select the PANEL LOCK option by pressing the P ▲ or ▼ buttons the
required number of times.
5 Select ON by pressing the + button.
Result: The buttons on the front panel no longer have any effect.
6 To unlock the front panel, set the PANEL LOCK option to OFF.Another option would be to buy a universal remote from say - Argos carefully open it and use your own batteries and use that remote to unlock the TV then return the remote to Argos or if keep the remote if the original is lost. i hope it helps

regards
shaun

Jan 12, 2010 | Samsung Projection Televisions

2 Answers

I have two remotes. One is for the Olevia TV and one is for the cable - Smart City. I only use the Olevia TV remote for powering on and off and volumn. The channel down button on the TV remote got...


Make sure your cable box is on and on a channel that you normally watch so that we know there is video being transmitted to the TV,then useing the remote that came with the TV press the button that is labeled " input" or " source" multiple times until you see a picture back on your TV screen. Good luck and Happy Holidays!

Dec 23, 2009 | Projection Televisions

1 Answer

Black Borders


Change the aspect ratio to FULL

Mar 04, 2009 | Hitachi 51F500 51" Rear Projection...

1 Answer

My tv the picture is bigger than the tv screen


it sounds like you have hit the zoom button or your aspect ratio isnt right. the aspect ratio should be set to 16:9 (if there isnt a button for aspect ratio, change it in the menu) and there should be a zoom button on your remote and just keep hitting that and it should return to normal. If neither works, post your tv brand and model and i'll try to find another answer

Oct 20, 2008 | Akai PT4298HD Rear Projection Television

1 Answer

Xbox 360 game play screen is too wide. I can only see part of the game play.


make sure your tv is on the right aspect ratio, and not widescreen. find your remote and it should have aspect ration button on it, or it will be in the menu.

Sep 10, 2008 | Projection Televisions

1 Answer

S11-0a


Hi underbe

What make is the remote you need the manual for... could not find anything for s11-0a

regards
robotek

Jul 06, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...