Question about Janome Memory Craft 10000

1 Answer

MC 10000 Digitizer 10000 Error Message

I bought a new computer and loaded my Digitizer 10000 v. 1.0. The hasp is installed but I get an error message that says there is no HASP installed. I checked and the computer recognizes the port. Is there a patch for XP?

Posted by on

  • Anonymous Mar 18, 2014

    when connecting my machine to windows 7 computer, machine message states "Please check pc connection."

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Try downloading the updates for your software from Janome Global, downloads, software. Version 1 needs patches to make it compatible with XP. The most current Version for the 10000 software is 2.21, and the upgraded program is Digitiser pro/MB , a much more stable and far easier version to work with. The upgrade has to be purchased via a dealer or direct from Janome.

Posted on May 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I had to buy new computor got a 25 pin put in for dogle downloaded hasp drive but still says security device not found. Help!!!!!!!!!!


Welcome to Fixya

May i know the brand and model of the device that you are trying to connect to your computer? Where are you seeing the error message?

Your response will be highly appreciated.

Thank you for using Fixya!

May 16, 2011 | Bernina Artista 180

2 Answers

Connecting my Memorycraft 10000 to a PC


Have you got the cable that is compatible with your machine. If you are running Customiser 10,000 on your computer it should be fine otherwise it could be that you are running Windows7 not sure about that though.

Feb 05, 2010 | Janome Memory Craft 10000

2 Answers

My computer tells me my HASP Driver is not installed it then tells me I should download Aladdin disc. DOnt know what that is


That error message is due to you not having the latest driver. Go to aladdin.com and download the HASP 4 driver on their web site. After you install it, your problem should go away.

Dec 29, 2009 | Husqvarna Sewing Machines

1 Answer

Why "Digitizer 10000", which used to work on my computer with WinXP SP2, is not working on Windows 7? After installing the software, I click on the button to start the program, but the mistake comes. Help...


Windows 7 is not compatible to your Digitizer 10000.
You may need a software driver to configure it with
the new operating system. You should know that there are lots of things that work with Windows XP and won't work with Win 7. So try surfing the internet
at Microsoft to address your problem.

Oct 14, 2009 | Janome Memory Craft 10000

1 Answer

Cannot open Bernina Software - States Hasp not installed -100 -


More likely the software you have is a corrupt one or is not compatible with windows ME.
However, to be on a safe side, follow the steps :-

 1. Remove the dongle from the USB port.  2. Uninstall the software.  3. Restart the PC.  4. Download the software.
 Make sure that the software is compatible.
 Unless change the CD or download the software from some different website ( In case you are downloading it from a particular website ).
Thanks.

Mar 25, 2009 | Bernina Artista 180

1 Answer

Janomi Digitizer 10000


Well, after some research, contact with Janome Technical support and some trial and error, it seems that my problems are caused by a conflict with Windows XP Service Pack 3. At this time, my options are to run without service pack 3 loaded on my computer OR I'm told I can upgrade to Digitizer Pro and get rid of these issues. Neither is a good option in my opinion. Running without service pack 3 loaded for Windows, causes lots of system issues for me, but I hate to spend the $400ish it will cost me to upgrade too! I'm not even sure my computer has enough "horse power" to run the new version anyway. Just thought someone might like to know my experiences.

Feb 15, 2009 | Janome Memory Craft 10000

2 Answers

Donegal


This must be wrong. As long as you have the dongle, and its an original one. Janome should swap it for a new one. You might have to pay for the exchange but it should be aloot cheeper than buying a new.

If not, send me an email on tonje (at) tonje . no and I will give you a good price for a new Digitizer Pro v.2.0

Jan 08, 2008 | Janome Memory Craft 10000

3 Answers

JANOME dIGITIZER 10000 - "JANOME.EXE has stopped working"


Digitizer 10000 v2.21 might run in compatibility mode on Vista, but there's no gaurantees. Even the latest digitising suite Digitiser Pro/MB is experiencing problems running in Vista 32 and as yet has no real fix (driver) for Vista 64.

Dec 29, 2007 | Janome Memory Craft 10000

3 Answers

Janome MC 10000 with Easy Transfer using jef files


Your internal memory files could be full and need some designs deleted, the monogram design might not be centred in the hoop so it registers outside the sewing field, The hoop selected might be too small for the design.

Dec 21, 2007 | Janome Memory Craft 10000

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

543 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

165 Answers

Irene Tulloch

Level 2 Expert

449 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...