Question about Printers & Copiers

Open Question

Easy Share 5300 Error Code 3809 - Printers & Copiers

Posted by on

  • 2 more comments 
  • Anonymous Jul 25, 2008

    error code 3809 on 2 machines

  • Anonymous Oct 17, 2008

    The printer starts to print, then it stops and says error 3809. Please help!

  • Anonymous Nov 25, 2008

    exact same issue only after trying to make scans. Otherwise this printer has been a rock.

  • koolhg Jan 05, 2009



    I continue to get a message that my print head is missing or incorrectly installed. I reinstall it and than calibrate the preinthead, then i get a print error code. please help.



    hg

×

5 Suggested Answers

  • 30 Answers

SOURCE: easy share 5300

To fix this problem, do the following:

1. Open up Kodak AiO Home Center.
2. Click on "?" on top right corner.
3. Click on "Maintenance" then click on "Printhead Cleaning"

You might have to do this a few times to clean out the printhead.

Posted on Feb 08, 2008

  • 30 Answers

SOURCE: since installing my printer I have a error code of 3610 and 3501

Upgrade to the latest software and firmware from the Kodak website below.

http://www.kodak.com/global/en/service/downloads/dln_ekn033540.jhtml?pq-path=9106

Posted on Feb 08, 2008

SDtester
  • 41 Answers

SOURCE: kodak easy share 5300 -

The first thing you should try is running a printhead cleaning using the kodak software or from the local user interface on the printer. from the printer press the [menu] button. press the down arrow untill Clean Printhead is highlighted. press the [OK] button. Select "Deap Clean" and press [OK]. If this does not work you can mannually clean it. You can search online for how to clean inkjet printheads. I use distilled or de-ionized water and a LINT-FREE cloth. Dont use paper towls or anthing that could leave lint behind and clogg the nozzels. when you wipe the printhead make sure you only wipe in the direction of the nozzels, with the grain. Do not use a circular motion. You want to wipe from the front to the back or back to front of the printhead. Not left to right. I hear windex works as well but i have never tried it. Do some research online and use you best judgment. If none of this works you may have to contact kodak and see about getting a new printhead, they dont sell them sepeartly.

Good luck!

Posted on Feb 14, 2008

  • 1218 Answers

SOURCE: Kodak Easy Share 5300 Printer error Error

Error code "6203" can be resolved as follows:
First, you need to open the access door of the printer and disconnect the power adapter from it.
You then need to wait for at least 30 seconds for the printer to get reset.
As a next step, you can connect the power adapter back to the printer.
You can turn on the printer, if required. Once the printer gets powered up, a message "Printer access door open" gets displayed.
Once this message gets popped up you can close the access door of the printer. get more help for Printer Error Code 6203
Hope this helps you.

Posted on Sep 20, 2010

  • 16 Answers

SOURCE: My Kodak Easy Share 5300 Printhead needs to be

Take the printer to the place you purchased it from. Throw it through the window and steal another make. Everyone will understand

Posted on Oct 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is error code 3806?


Error Printer error 3806 3807 3808 3809 3810 or 3811

Kodak does not say what the error is but they do show how to deal with it.

Nov 29, 2015 | Kodak ESP Printers & Copiers

1 Answer

Screen shows fatal error code 3809 please advise fails to print any color


try this steps based on the given instructions from other forums.
To resolve this error:
  1. Disconnect the power adapter from the printer.
  2. Wait 30 seconds to allow the printer to reset.
  3. Connect the power adapter to the printer. Turn on the printer, if necessary.
If the error continues:
  1. Open the printer access door.
  2. Remove and install the printhead two times.
  3. Close the printer access door.
  4. Wait until the printer is ready to use.
  5. If problem persist better to send your printer to the technical person near on your place

Sep 02, 2011 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak Easy Share 5300 Printer error Error code 6203


Error code "6203" can be resolved as follows:
First, you need to open the access door of the printer and disconnect the power adapter from it.
You then need to wait for at least 30 seconds for the printer to get reset.
As a next step, you can connect the power adapter back to the printer.
You can turn on the printer, if required. Once the printer gets powered up, a message "Printer access door open" gets displayed.
Once this message gets popped up you can close the access door of the printer. get more help for Printer Error Code 6203
Hope this helps you.

Sep 10, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

ERRO 1-2070 Kodad Easy Share 5300


This is a software software error, have the Kodak Home center remove form the Control Panel, Add Remove programs, then run the clear utility from www.kodak.com/go/clear follow the prompts there, then reinstall the software using the disk or from the web, this is the link www.kodak.com/go/5300downloads

Dec 25, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

My kodak easy share 5300 has printing issues. I


Try this one, Turn on the printer, Take out the inks, remove the printhead, put back the printhead make sure it will snap and you hear a click, put the inks back, wait for the printer to initialize, Press the Menu button, look for Calibrate printer, then print calibration page, then scan it after. Load a regular paper. Then try to print a demo page by pressing Photo and Copy at the same for 5 seconds then let it go. If same problem persist call this no for further assistance 1800 421 6699
Thanks

Aug 29, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

After 2 0r 3 items are printed it shows me an eror code of 3809


Please call 1.800.421.6699 and select option 01 for prints missing black or color ink. Kodak will send you a replacement printhead kit for free. I hope this helps.

Jan 23, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

3 Answers

Since installing my printer I have a error code of 3610 and 3501


Go to the Kodak.com website and follow their prompts to reach Customer Support for the AiO Printer(s).
Had similar issues with mine and they resolved my problem overnite by sending me a replacement part.

Jan 01, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...