- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
make sure your its enabled in your bios during the boot process you will see on your screeen to press acertain key to enter set up press and hold that key to enter set up
using arrow keys navigate to intergrated peripherals press enter look for SiS 10/00 press enter make sure ethernet its enabled press f10 save to cmos restrart your computer if this fails to fix the problem
the driver for this modem should be on the motherboard disk or the disk provided by you ISP internet service supplier
you will have to open up your network connections click start control panel network connections this may vary depending on your operating system look for local area connection if you see a red x or a yellow exclamation or question mark ! ? you will need to update or install the driver or it could be firewalled or you could click start control panel administration tools computer management device manager look for network adapters + expand Ethernet driver if you see a yellow question exclamation mark or a red X you will need to update/reinstall the driver for the device if you computer came with a motherboard disk the driver could be on it also the drivers might be installed for this device click start control panel administration tools computer management device manager scroll through all of your devices if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver
Download the device drivers from the Acer WEB site. Makesure you select the model of your laptop the drivers you that require thatmatches the Windows version that is installed on your laptop. Use this link toget to the Acer support: - http://www.acersupport.com/drivers_download.aspx
If you are using Windows Xp, just connect the modem using USB/LAN it will be automatically detected & software for it will be installed. Then you can just set up a connection, put in your username & password, done.
If you are using Windows Vista / Windows 7, modem in LAN mode will be installed automatically like XP, but not in USB mode. Because there's no USB driver for UT300R2U (BSNL modem) in Vista. You need to find a ZTE Remote NDIS device driver, install it & then you can connect. Hope this will fix your problem.
check phone line swap for a cat 3 RJ 11 cable not all modular cords are the same
Cheapo dollar store or made in china labels on mod cords are decieveing, poor quality as well construction . Buy a Qulaity cord.
check phone jack if you own a puppy or kitty the love to mark and green corrosion will mess a jack up. replace if its green ans well the mod cord may be green don't waste time in cleaning it. key word RESISTANCE !
as a CET in electronics and I have been around a long time, ignore some unprofessional advice less stress that way.