Camera goes through format routine,but card but

Well, formatting it immediately is not recommended. There might be quite a lot of reasons that may cause this kind of format error problem saying memory card not formatted. Check out this article memory card not formatted - how to fix & recover to learn more the right fix step by step. Best regards.

The DX4330 uses SD cards, not SDHC cards. While SDHC cards will fit into the slot, they are electronically incompatible and will not work. You need to go with SD cards 2GB and smaller.

First, be sure the card slide switch is in the unlocked position. Then, insert the card,ignore the message on the screen and go into the camera menu to find "format"...then, follow the on-screen instructions.

Where are you formatting these cards? You're supposed to do them in the camera.

Hi there follow the steps below.
1. Remove the card from the camera.
2. Make sure the card is unlocked. That lock key
present in side of the memory card.
3. fix it back in camera.
4. format the card from the camera. You can get the
option for format from camera settings pressing
after menu key.
5. After finish the format, restart the camera.
6. Now you can see that message has gone & its
start working. If you face the same problem then
the memory card is damaged or the camera card
reader is damaged. I hope you will not faced those
problems. Please let me know the result. If you
want to know more then ask me again .Thanks.

Hi,
Reinsert memory card in camera and try to format it. If that does not help then check with new memory card as old memory card could be defective.
Thanks.

I'm guessing you bought a new 4GB SDHC card. Although it looks exactly the same as a standard SD card, the format the card uses is very different. Unfortunately your camera was designed before the SDHC format came out. Sorry, but a SDHC card will not work with your camera.

You'll need to use standard SD cards (usually those 2GB or less). But if you really want to use a 4GB card, do a Google search for 4GB SD "non HC", with the non HC in quotes. Believe Transcend makes one.

try formathing the 2 GB card with fat.

Preformat : By Fix-shad0w

#1
Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com
#2
Open up 'My Computer'. You should see it under the list of available drives.
#3
Check its contents first to make sure that you have the right drive.
#4
In 'My Computer', right-click on the drive and choose 'Format'.
#5
Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place.
#6
Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.

With A USB , CELLPHONE , Camera The SameThing

Your camera is not SDHC compatible. It will only support standard SD cards. Sorry.

I hope this helps.