Question about HP OfficeJet 7410 All-In-One InkJet Printer

3 Answers

Hp psc 2410xi photosmart all-in-one printer.

A message after replacing my ink cartridges. that says remove and check color cartridge, and i have done that but problem still there.I used HP cartridges as i have before. I also tried another new cartride.

Posted by on

  • Anonymous Apr 20, 2008

    I have the same problem. I replaced the black ink cartridge (HP96) and it gives me the same error message saying to check ink cartridge. I tried with 2 new cartriges and tried the used one, all to no avail.

  • dgus2 May 11, 2010

    I checked the circuit board and it has a tiny hole in it as you suggested....where do I get a new one????? and how to replace it???




    thanks - dgus2

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Here's what I found when this happend on my two 7410's. Take a look at where the ink cartridge slides into it's holder. Shine a flashlight on the circuit board at the rear. You will no doubt find it has a puncture in it that breaks the little tracer wires on the board. The culpret is the tension spring arm. It likely has come off it's base support and when that happens, and you install a new cartridge, the cartridge will push the tip of the tension wire g right into the circuit board. After you fix the circuit board, apply some silicone glue to the spring base mount to hold it in place.

Posted on Apr 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a problem with my 2410 printer cartridge ink after i replace the black ink it keep telling remove it and check and i try,but it still same problem

Posted on Dec 12, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Airportbum,

I have the same issue. How did you "fix" the circuit board?

Posted on Apr 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What to look for when it keeps saying ... Error .... Remove and check color Cartridge?


I suggest you run the 'Tap 10' diagnostic test pattern for your HP PS 2600 series printer model...this will display the electrical health of the ink cartridges and confirm that your printer is operational (I am guessing one of the ink cartridge control lines is open).
http://www.youtube.com/watch?v=RTFOBtdthAc



Good luck
www.inkjet411.com

Mar 06, 2013 | HP Photosmart 2610 All-In-One InkJet...

2 Answers

What is problem when a ink jet printer (hp psc 2410xi photosmart) has a red stripe in the black print?


Using HP56, 56 cartridge for your printer?

Well, when you are out of black ink, that's what it happens.

Pls refill your cartridge or replace with new one.

How you refill? very easy.

f you would like to save money, try refill kit by "ROADINK".
Not only they are easy, but also the printing quality is good.
For your better understanding pls check out my youtube video.
And will see how easy ink refill can be done.

May 12, 2011 | HP Office Equipment & Supplies

1 Answer

Hi, I have a hp psc 2410xi photosmart and I can't get read of the eroor message remove and check your ink cartridge. Please help


1) connect printer directly to wall
2) try with different walloutlets
3) remove the cartridge and the clean the copper contacts with a lint free cloth
4) then unplug the power from the back of the printer and then press and hold the power button for 30 sec then release the button.plug in the power chord.
5) then unplug the power chord from the back of the printer.. press and hold down the (#) pound and 6 key together and then without releasing the button plug in the power chord.. once power chord is plugged in release the two buttons..
then check what happens.
6) try replacing ink cartridges
7) if it does not work service the product

Mar 26, 2011 | Office Equipment & Supplies

1 Answer

My c4180 printer says Ink cartridge problem. Remove and check colour cartridge. Cant get message to go away. I use original Hp ink cartridges


If the color cartridge contacts are clean and there is stil ink in the cartridge.
What you could try is to remove both ink cartridges.
Close cover and turn off printer and unplug the printer.
Wait at least 15 minutes for the printer to reset to clear memory.
Plug the printer back in and turn on and install the ink cartridges.
If you cartridge is not empty and has not expired.
You may call HP and ask for a free replacement.

Jan 09, 2011 | HP PhotoSmart C4180 All-in-One Color...

3 Answers

How to refill the cortrideg hp deskjet f4288.


Hi

the most important is to remove all
the air from the cartridge that has
left inside durring refilling that is why
professionals are using special machines
that refill in 0 air πρεσυρε using vaccum pump

you can check here a video on how to refill
with out any special equipment



Hope I had help you



">

Dec 08, 2010 | HP DeskJet F380 All-In-One Printer

1 Answer

Re: hp psc 2410xi photosmart message: remove and check color cartridge. I've done that and message still repeats itself


Are you using genuine HP cartridges or have you refilled old cartridges recently?

These are typical problem when either the cartridges is non HP genuine type or if it has been refilled.

Mar 29, 2010 | Office Equipment & Supplies

1 Answer

Remove & check cartridge message


What you could try do is to remove both cartridges, close cartridges cover
Unplug printer for awhile, at least 30 minutes
Plug in printer and wait until printer stop
Reinstall both cartridges
This is to let the printer reset and do a new installation of ink cartridges

Feb 20, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

2410Xi printer cartridge replaced. still displaying ''remove...''


there are two cartridges in the printer did u replaced both the cartridges ,as sometimes both the cartridges r faulty.and so this message comes.

Nov 14, 2008 | HP PSC 2410 All-In-One InkJet Printer

1 Answer

Hp psc 2410 photosmart check color cartidridge ?


I'd clean the cartridge connections on the printer, try a new cartridge and refrain from using reinked cartridges.

Jul 23, 2008 | HP PSC 2410 All-In-One InkJet Printer

Not finding what you are looking for?
HP OfficeJet 7410 All-In-One InkJet Printer Logo

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...