Question about Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

1 Answer

Cant get manuel or part #s

I just got my machine back after 2 yrs and some parts are missing or need replacement can u help amurillo325@aol.com

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 310 Answers

Hoover SteamVac F5914-900 Spin Scrub Upright
i just got my machine back after 2 yrs and some parts are missing or need replacement can u help

I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
The best way to get parts for the Hoover is to check your local vacuum Hoover dealer in the yellow pages in your area or you can call the Hoover Factory and they might be able to sell you product or direct you to the nearest Hoover vacuum dealer in your area. The phone number and website are listed below:
http://www.hoover.com
Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

Posted on Apr 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

RONSHESTACK@AOL.COM


Scunci International
2200 Byberry Road
Hatboro,PA 19040
Google search should provide a lot of options for obtaining the brush's but don't forget EBAY as it has been sometime ago but I had bought brush's for my steamer threw then. Good Luck!

May 25, 2014 | Scunci SS1000 Handheld Steam Cleaner

1 Answer

I need a manuel to replace a broken fan on my g4 kriby


Hello,

We have actually recorded a very informative do it your self video on how to replace the fan on a Kirby Generation upright.

The video is a two part video, but this explains step by step how to remove the old fan, and put the new one on.

If you need to purchase a new fan assembly, here's a link to the Fan assembly for your Kirby G4. Unfortunately you may only purchase them as a complete assembly:
Genuine Kirby Vacuum Fan. Kirby Part # 119096S

Here's the videos showing how to replace the fan:

Part 1:

Part 2:

Hopefully this helps you with your problem! If this did help, please be so kind and rate the repair, or leave feedback for me. This is very appreciated by the Fixya community when someone is able to answer your question, and assures that experts continue to answer free questions, instead of just the premium paid questions.

Thanks again!

Chris Jones
GoVacuum.com

May 15, 2010 | Kirby G4 Bagged Upright Vacuum

1 Answer

How to maintain my machine i lost my manuel


You can get the manual here:

http://www.retrevo.com/s/Bissell-1697-W-Vacuums-review-manual/id/10039bh340/t/1-2/

Apr 30, 2010 | Bissell 1697-7 Powersteamer Pro Deluxe...

1 Answer

I have the Eureka bagless with the claw. I need a


A manual for this machine can be sent to you from Eureka. Here is a phone number. 1-800-800-8975. That should get you help for a manual and they can send you the accessaries that you are missing. Also the manual will give directions on cleaning your filters.

Dec 03, 2009 | Eureka Vacuums

1 Answer

I am trying to replace the cable and actuator on a Hoover windtunnel self propelled vacuum. but I cant get the top or hood off the get to them, I have removed all the screws I can see, roller, belts..what...


Hi there SmartAlec from NelsonVacuums.com.au here. You will need to remove the knobs for carpet/hard floor selection and the carpet height to remove the cover they act as kind of a locking pin. And from memory there are 2 catches on the sides as well that need a flat blade screwdriver to unclip them you can see them when vacuum is upside down on the very edges of the machine (small rectangular holes).
Hope this helps
Happy Vacuuming :)
Send me an email if you need more help

Aug 31, 2009 | Vacuums

1 Answer

Where do I put the water.


1. Release the handle and lay the machine
handle back to access the tank.
2. Remove the tank from the base of the
machine by lifting the tank carry handle.
3. Carry like a bucket to the sink. Rotate the handle forward
to unlatch the lid. Lift off and set the lid aside.
4. Fill up the bladder with clean hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
5. Replace the top of the tank by matching the
lid and tank edges. Handle must be in the
forward position in order to replace lid. Rotate
Note: Remember to secure the lid and test to make
sure it is secure before picking up the Tank.
6. Place tank into machine base, seating firmly in place.
Rotate tank handle back into latched position. Bring
machine handle back into upright position.

You can download the manual from the Bissell website www.bissell.com

Jan 28, 2009 | Bissell 1699 ProHeat Clear View Upright...

1 Answer

Sweeper belt


Greetings from GoVacuum.com,

Have you replaced the belt with a new one yet? You may want to try replacing the belt, as with flat belts like the Fantom Thunder, they do stretch out 4 -5 inches after time. We in fact recommended replacing a flat belt every year, even if the belt doesn't break, because of the stretching. I think what may have happened, is that your belt is stretched to the point where it will not stay on the pulley as soon as there is any tension (putting the brushes on carpeting), which will cause the belt just to slip off.

You should be able to replace the belt (very inexpensive, we sell Fantom belt for $2) and this should take care of the problem. When you replace the belt, you should also take the roller brush apart and remove any hair, or thread that may be wrapped around the bearings. You should be able to remove the bearing cap by pulling them, or holding one end, and unscrewing the other.

I'd even be willing to send you a free Fantom Thunder belt, if you'd be so kind to vote Fixya for this answer :-) Just send me an email with your name, address, and the exact model number (located on the back of the machine, or the bottom of it) of your vacuum, and vote Fixya, I'll immediately ship you the belt for free!

Please let me know if you have any other questions I can help you with.

Chris Jones
GoVacuum.com
chris.jones@govacuum.com
1-866-468-2288

Oct 13, 2008 | Fantom Vacums XT450K Upright Vacuum

6 Answers

Hoover SteamVac Dual V Carpet Cleaner # F7410-900


"I did some research online and the recurrent theme was a bad turbine assembly. Fortunately I was able to fix this myself which took about 2 hours (some reading) and little effort. The problem was with the turbine which is fairly simple and had a bearing that had rusted and froze up. Removing the cover proved to be more difficult than fixing the stuck bearing. This was mostly due to figuring out the correct screws to remove and finally discovering that the back of the cover (over the wheels) is not secured by fasteners but by pegs that "pop" out.

Once I had the brush assembly and Cover removed the turbine came out with the removal of some obvious screws and gently pulling the hoses from the assembly. After carefully opening the assembly housing I discovered the bearing problem and with a little lubrication and some new grease had it working in short order. Putting everything back together was simple as well."


this worked for me. although once i got in i just had to mess around with the gears and loosen them up. getting in was the hard part soo here you go peoples.

take off tanks

unscrew 6 screws fom underneath machine. look carefully

just underneath where the dirty tank goes right by the part that sucks everything up is a screw. unscrew it

pop off the switch for your spin scrub mode. it pops right back on.

make sure your locks for the tank are turned in

then the back just pops off. you might have to give it a good tug. there are no screws although it maight look like there is.

then pull off the grey part.

once inside it is pretty easy.

but if you have any questionbs email at lostnhisblueyes@aol.com

i took off so many more screws than i needed to to get this figured out so dont do that.

Feb 23, 2008 | Hoover F7425-900 SteamVac V2 Widepath...

Not finding what you are looking for?
Hoover SteamVac F5914-900 SpinScrub Upright Vacuum Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...