SVA-USA HD4208 42 in. HD-Ready Plasma Television Logo

Related Topics:

Posted on Apr 16, 2008

Sva number ed4218p

The tv channels dosent work with the control or manually the message from the tv screen says that atsc moduel is booting and i liked to know if you can send me moduel or where i can get it am waiting for your response

2 Related Answers

snakehead

Henry Thomas

  • 1074 Answers
  • Posted on Mar 23, 2007

SOURCE: SVA plasma tv-model# HD4208T

you can get a manual for your tv at wwww.partstore.com that will guide through the setting up of your tv,good luck.

Ad

Anonymous

  • 9 Answers
  • Posted on Apr 06, 2009

SOURCE: sva tv model;HD4208Tiii-pop will work for 15 minute then turn off

We have identified a common problems with theses sets manufactured by, SVA, Gateway, Viewsonic, Sampo and a few other brands. They all have a Samsung power supply board (LJ44-00025A), which has cause these units to lose power. There is a easy fix, replace the power board. But you ask why should we? That's the right question. If these boards all have the ability to fail with various parts and within various displays.This has to be a defective part. As of now, there is no recall on this part. Therefore, we are generating a list of customers, who own these displays and are requesting a refund for previously purchased parts or a replacement part at no cost to the customer. We are in the preliminary stages, so please be patient with our efforts.

If have identified your unit is salvage by an power issue an wish to purchase the identified part (LJ44-00025A, we recommend you purchase from http://www.adc-ast.com/.

We cannot guarantee that any monies will be refunded by this claim.

Thanks
Shawn Moffett
Samsung Claims Administrator


If you are interested in participating in this claim, please email the requested below to [email protected]

<NAME>
<ADDRESS>
<PHONE>
<EMAIL>
<MODEL>

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I get my 7" widescreen lcd tv with atsc tuner to show channel numbers?

ATSC Digital (VIRTUAL!) Channel NUMBERS vs Actual Channel ...

www.avsforum.com/.../1260172-atsc-digital-virtual-channel-numbers-vs...

Jul 2, 2010 - 4 posts - ‎4 authors
Then came ATSC tuners and digital - [I was about 20 minutes into .... *SHOULD*display the SAME VIRTUAL CHANNEL NUMBER when tuned ... iView-3500STB Tuner & DVR Owners Thread - AVS ...
30 posts
Mar 30, 2013
OVER-THE-AIR DIGITAL TELEVISION RECEPTION ...
30 posts
Dec 3, 2005
More results from www.avsforum.com
0helpful
1answer

Code for sva ed4218p

www.fitness.manualsonline.com or www.remotecodelist.com

God bless you
1helpful
1answer

No picture on screen,the power is on,and de audio ok.

Hello,

More than likely this will be down to your Y Sustain board has gone faulty, when the back is off your TV it is on the left hand side and will probbaly have a fuse that has blown, replacing the fuse will not solve the problem as it is the IMP under the heatsink that has gone faulty.
You should get the part number of the board from Ebay.com for a replacement.
Hope this helps




1helpful
1answer

SVA television. Have model # EV1703 Remote no

When you say the remote doesn't get the channels I have to assume the channel entry behavior changed. I am not to familiar with this brand but these are the basics for most tv's. If you have not removed the cable input to the tv or unhooked anything before the problem started here are a few thing you could try. Push the menu or setup button on the remote and under the channel or setup option on the tv make sure it is set to Cable and not Air or Antenna. Run the tv through the auto channel search to reprogram the cable channels. This process can take close to 1 hour on some tv's since it has to scan through the digital and analogue tuners. This will allow your tv to add the correct cable channels and remove the unwanted ones. You should be able to enter the channel number or move up and down with the channel buttons on your remote.
1helpful
1answer

No antenna tv signal

Your dish remote should be set to the code for your TV. Then you will be able to control the channel number, not just up/down, as well as volume and maybe even the input. But do try to get a real remote for your TV so you can get to its menus.
Meanwhile, use menu+menu to see the channel being output by the Dish receiver. (Must be a 622/722... based on the 60 you listed.) Try to find an unused UHF channel number that your set does have in its up/down list. Match Air/Cable setting of Dish and TV. The Dish output is analog (NTSC) although the tuner(s) only accept digital (ATSC).
-Ken
0helpful
1answer

T V wont turn on

This is a common problem on these plasma TV's. The problemresides in the high voltage boards known as the X and Y Sustainboards.. You can purchase them here for a very reasonable price:
http://www.discount-merchant.com/Y-SUSTAIN-FOR-42-PLASMA-TV-PN-6871QYH036A-p/sku9510.htm

The above link is to a Y-SUS board. The X-Sus board is often the 2nd cause of failure and can be found here:
http://www.discount-merchant.com/X-SUSTAIN-6871QZH041B-6870QZE017D-6871QZH052D-p/sku9509.htm

Totest which board is failing, you need to check voltage input to theYSUS board first... Input should be 120V from Power supply, outputshould be above 250V.. Do this test with XSUS disconnected. IF 250+Vexists, then XSUS is damaged. If not, then the YSUS is the faulty part.
1helpful
1answer

Channel setup

You will have to run the Autoprogram menu function from the menu. Here are the steps

Press the MENU button on the remote control.
Use the cursor down to select Installation in the Settings menu.
Use the cursor right to enter the Installation menu.
Select Autoprogram in the Installation menu.
Use the cursor right to enter the Autoprogram menu.
Press the OK button.
Select Cable or Antenna in the Installation mode.
When Antenna is selected, the TV will detect antenna signals and will search for antenna TV (NTSC and ATSC) channels available in your local area.
When Cable is selected, the TV will detect cable company supplied signals and will search for cable TV (NTSC,ATSC, QAM modulated) channels available in your area.
Make sure that registration with your cable TV provider and connection of equipment are completed.
Press the green button “Next” on the remote control.
Press the green button “Start” to start autoprogramming.
The menu screen disappears and the progress of autoprogramming is displayed.The progress bar indicates the number of analog and digital TV channels found. (Also digital channels via CableCARD are being programmed.
When Autoprogramming is complete, a message appears confirming the completion and the TV switches to the first installed TV channel.
0helpful
1answer

Philips/Magnavox 32MF605W/17 32" LCD Wide Screen HDTV ready w/ATSC.

Yes you can. This TV has both VGA-In and component in support. The only thing you need to change is the input you're using with your remote control. As easy as changing the channel!
1helpful
2answers

Remote control codes

The only remote that works is the one 4 all. Call ONE 4 ALL for the right model number. They then can program the remote on the phone to operate the SVA tv. It worked for me until the set died this week. Guess why I am looking on this site.
1helpful
1answer

SVA plasma tv-model# HD4208T

you can get a manual for your tv at wwww.partstore.com that will guide through the setting up of your tv,good luck.
Not finding what you are looking for?

35 views

Ask a Question

Usually answered in minutes!

Top SVA-USA Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a SVA-USA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...